Pangu Updates iOS 9 Jailbreak Utility With Bug Fixes

POST

MAIL

Posted October 15, 2015 at 6:45pm by iClarified

Pangu has updated its iOS 9 jailbreak utility with bug fixes and other improvements. The Pangu9 jailbreak utility works on the iPhone, iPad, and iPod touch and jailbreaks iOS 9.0 to 9.0.2.

What's New In This Version:
1.Fix a bug that leads to 0A error code.
2.Fix failure of launching on some PC.
3.improve success rate.
4.Ensure the removal of the Pangu app.

You can find instructions on how to jailbreak your device here:
● How to Jailbreak Your iPhone on iOS 9 (Windows) [9.0.2]
● How to Jailbreak Your iPad on iOS 9 (Windows) [9.0.2]
● How to Jailbreak Your iPod touch on iOS 9 (Windows) [9.0.2]

You can download the new version of Pangu from here.

Please follow iClarified on Twitter, Facebook, or RSS for updates.

Pangu Updates iOS 9 Jailbreak Utility With Bug Fixes

Follow iClarified

Add Comment

Would you like to be notified when someone replies or adds a new comment?

Yes (All Threads)

Yes (This Thread Only)

Notifications

Would you like to be notified when we post a new Apple news article or tutorial?

Yes

Comments (42)

You must login or register to add a comment...

Add Comment

rlsikosek - October 21, 2015 at 9:57pm

After updating Cydia Installer and Pangu Untether through Cydia, the storage bug is fixed

Reply · Like

Sameera Kariyawasam - October 21, 2015 at 11:14am

I did Jailbreak my Iphone 6, 128GB. everything went fine. but this jailbreak is not stable. I have a bug in Photos. the pictures i already had before jailbreak went blank.and also its showing "Downloading" on the bottom of the pictures. another error i found once i connect to iTunes using PC. when you go to apps, on the bottom we can see the apps that we can transfer data direct. EX. VLC player, KM player, Skype, . those applications are not showing.

Reply · Like

Mike Power - October 21, 2015 at 3:03am

Everything went A-1, not one problems, all tweaks installed perfectly, 3d touch working and live photos in my iphone 6 and iphone 6 plus, Barrel and many more tweaks. thank You Pangu. Glad I didn't buy the 6s, wait till iphone 7 comes out.

Reply · Like

ABunchOfPeople9 - October 18, 2015 at 3:40am

Jail broke both an iPad mini and iPhone 6s no major problems that I can tell one bug message pops up every couple of hours saying storage full on both devices even though half the memory is empty

Reply · Like

KarchaInSD - October 17, 2015 at 8:03am

I'm staying with 8.4 until all this stuff gets ironed out

Reply · Like

Nhan Le - October 17, 2015 at 7:59am

I can't open cydia. please help me

Reply · Like

Luciano - October 18, 2015 at 2:17pm

It happened to me then u need to restore your iPhone throu iTunes then re-jailbreak it don't back up your iPhone just start as a new it should do it

Reply · Like

joshWUa - October 17, 2015 at 5:43am

Everything works so great and best yet the Pandora skips tweak works!!

Reply · Like

clown - October 17, 2015 at 3:32am

Had to restore, waiting for future update.

Reply · Like

clown - October 17, 2015 at 3:31am

Yes iphone 6s installed safe mode. Stuck on apple logo.

Reply · Like

angie marquez - October 16, 2015 at 3:13pm

iPhone 6s plus after a while goes to apple logo and stays on a boot loop... anybody having this problem.

Reply · Like

Lobo - October 17, 2015 at 3:05am

Same problem gets stuck in safe mode when trying to reboot gets stuck on apple logo

Reply · Like

Mzh2016 - October 16, 2015 at 1:04pm

I downloaded program in my computer but when I start to download to iPhone 6s doesn't work with me

Reply · Like

Hitesh - October 16, 2015 at 7:27am

After I successfully jailbreak my iphone 5s and then when i restart it it stucks at boot logo anyone plz hel p

Reply · Like

Realtree 45 - October 16, 2015 at 6:16am

Updated from iOS 8.4 to the latest iOS 9 then jailbroke my iPhone no problems at all. I'm running a iPhone 6 Plus 16gb. And still no problems.

Reply · Like

Tarkan - October 16, 2015 at 6:02am

such an unstable jailbreak, you install a few tweaks then if you power off your device and try to restart you get stuck on the apple logo!!!!!! frustrating

Reply · Like

DarkKent - October 16, 2015 at 11:37am

First thing u do after jailbreaking and installing Curia substrate is a soft and hard restart to make sure u don't have them problems.

Reply · Like

PUCS - October 16, 2015 at 5:28am

Iphone 6, ios 9.02, jailbreak went fine, have cydia but when try to open it it crashes everytime, any suggestions?

Reply · Like

DarkKent - October 16, 2015 at 2:06am

Was getting runtime error at first. A lot of solutions say uninstall iTunes and all that but this is what I did. I just ran pangu9 as administrator and the error stopped. Jailbroke 5 devices. 1 iPad mini 4.. 2 iPad min 2.. And 2 iPhone 6 Plus. All iOS 9.0.2. All finished without a problem. I did not clean install 9.0.2 on the iPhone either. And on the other iPhone the update was done over the air. Still no problems. Only thing I don't understand is why is pangu backing up my device. On my iPhone which is 128gb I have about 5 gigs available left. (Yea I know) so it took forever to back up. Then at the end of the process it was just hanging there for a while. I just let if sit figuring because of how much memory I had used. Then it finally jailbroke with no problem so if u used a lot of memory on your device and it's at the end of the process just let it sit. Also where is pangu storing this backup because I did it on someone else's comp and I don't want a backup of my devices sitting on their comps.

Reply · Like

Quiman310 - October 16, 2015 at 1:37am

credit go to Leyla232@ reddit jailbreak community This method work at 1st attempted 1. RESTORE CLEAN. Do not restore from backup. 2. Jailbreak. Don't even set up your phone past the set up assistant. Don’t enter your icloud or iTunes ID but bypass that step. 3. Let Cydia do its thing. 4. Go back to Cydia after respring and install Cydia Substrate. It'll install along another file. 5. Install iFile or openssh or your preferred equivalent and flipcontrolcenter (for a respring toggle) YOU NEED THIS. Respring is mandatory. 6. Once installed navigate your file system to var/mobile/library/preferences. Scroll down until you find com.apple.purplebuddy.plist & com.apple.purplebuddy.notbackedup.plist and delete them both. 7. Navigate to var/mobile/library/caches and find com.apple.purplebuddy folder. Go inside it and delete all of its contents. 8. Respring your device now using flipcontrolcenter. 9. Go to settings - general - reset - reset all settings. (The first option) 10. Hit yes and wait till your phone finishes. (it will reboot) 11. Power off (swipe) and on your phone. Now reboot your phone by holding power and home button. 12. You’re good to go. Restore iTunes backup and install cydia tweaks. Good Luck!

Reply · Like

DarkKent - October 16, 2015 at 2:13am

What is all this for???

Reply · Like

DaemonSkillz - October 16, 2015 at 5:23am

I have heard that this will resolve my constant storage full message... Just seems like a lot to do just to get a jailbreak working. I might give it a go or just wait for Pangu to release another fix. Thanks dude.

Reply · Like

DarkKent - October 16, 2015 at 11:39am

That message should disappear after a reboot. It only popped on my devices once.

Reply · Like

iDood - October 16, 2015 at 12:52am

I'm using iPhone 5S 32GB and after jailbreaking successfully, when I reboot by pressing sleep and home button it always gets stuck at Apple logo. Anyone having the same issue? My iPhone 5 16GB on the other hand doesn't have this issue at all. Thanks in advance.

Reply · Like

Hitesh - October 16, 2015 at 7:22am

I am having the same issue but i used the old version is it the same with new ???

Reply · Like

iDood - October 16, 2015 at 3:26pm

Yes, the same issue happening with the updated version.

Reply · Like

Devil - October 15, 2015 at 10:37pm

anyone else have problems finding tweaks compatible with the new iPhone 6S Plus 64gig just wondering

Reply · Like

Jigsb - October 15, 2015 at 9:48pm

I jailbreak yesterday. Do I need to re-jailbreak??