如何获取你 iPhone 3GS的 iBEC and iBSS (Windows)

POST

MAIL

Posted July 1, 2009 at 10:25pm by iClarified

本教程教会你如何获取你iPhone 3GS的iBEC和iBSS，它们日后在iPhone的越狱中会被用到。点击这里可以找到Mac版本。

**注意：看上去通过DFU模式最容易同时获取iBEC和iBSS两个文件。跳过步骤4-6，你可以直接使用DFU模式获取文件。
步骤1
用Windows键+R弹出“运行”窗口. 在对话框中键入 %temp% 后单击确定。

如何获取你 iPhone 3GS的 iBEC and iBSS (Windows)

这会使你用户名的windows临时文件夹会弹出。确保文件按照修改日期排列，最新的文件会出现在顶端。然后下拉滚动条至第一个文件夹。

你必须能浏览隐藏的文件及文件夹。在Vista下，你可以通过选择工具栏上工具菜单中的文件夹选项来更改设定。

在查看中选择 显示隐藏的文件及文件夹然后单击确定。

步骤2
在桌面上建立Pwnage文件夹然后将3.0固件放入其中。你可以从这里下载。

步骤3
从开始菜单的程序列表中运行iTunes。

步骤4
确保你的iPhone 3GS已经与计算机连接，然后在左侧的设备列表中选择你的iPhone。按下Shift 键同时单击Restore 按钮。

选择桌面上Pwnage文件夹中iPhone2,1_3.0_7A341_Restore.ipsw文件并单击打开按钮.

现在你的iPhone会开始恢复3.0固件。你会收到iPhone上所有内容讲被抹去的警告。单击恢复按钮。

步骤5
在恢复过程中，时刻关注我们先前打开的 %TEMP% 文件夹。一个名字类似于Per518D.tmp的文件夹会出现。当它出现时，请马上选中并使用Control+c将它复制到剪贴板。

切换到Pwnage 文件夹，使用Control+v 将其粘贴到该文件夹内。

**记住，你完成该操作的时间有限，因为该文件夹将很快被删除。
步骤6
当恢复完成的时候，iTunes会询问你是否恢复以前的备份或设定一个新的设备。你可以通过选择恢复一个备份: 来将你的iPhone恢复之前的设定。

步骤7
备份结束之后，我们需要通过DFU模式做另一次恢复来获得iBSS文件。参照这里的教程让你的iPhone进入DFU模式。

随后，iPhone会弹出一条信息：找到一个处于恢复模式的iPhone。
单击确定，然后按住 Shift 键，点击恢复按钮。

选择桌面上Pwnage文件夹中iPhone2,1_3.0_7A341_Restore.ipsw文件并单击打开按钮.

现在你的iPhone会开始恢复3.0固件。你会收到iPhone上所有内容讲被抹去的警告。单击恢复按钮。

步骤8
时刻关注我们先前打开的 %TEMP% 文件夹。一个名字类似于 PerD112.tmp的文件夹会出现。当它出现时，请马上选中并使用Control+c将它复制到剪贴板。

切换到Pwnage 文件夹，使用Control+v 将其粘贴到该文件夹内。

**记住，你完成该操作的时间有限，因为该文件夹将很快被删除。在DFU恢复中，%TEMP%文件夹中会出现三次类似的文件夹，你需要获取第一次出现的那个。

步骤9
当恢复完成的时候，iTunes会询问你是否恢复以前的备份或设定一个新的设备。你可以通过选择恢复一个备份: 来将你的iPhone恢复之前的设定。

步骤10
大功告成！现在我们已经获取到了iBEC 和 iBSS. 请妥善保存，在不久的将来，他们在你为iPhone 3GS越狱时会派上用场。

为确保你获取到了这两个文件，请查看Pwnage/Per????.tmp/Firmware/dfu文件夹。你应该会看到以下两个文件: iBEC.n88ap.RELEASE.dfu 以及 iBSS.n88ap.RELEASE.dfu

译者注：这两个文件大小均为104,793bytes，如果文件大小不对，则获取文件不正确，请重复步骤7-9。此外，DFU模式中，第一个文件夹出现的时间极短，请留意。

Follow iClarified

devileye2002 - September 23, 2009 at 4:55pm

i've updated my phone by wrong to apple 3.1 firmware so does it worth to Capture iBEC and iBSS ?

Reply · Like

Jamie Barrett - September 13, 2009 at 4:36am

I didn't capture any details before I jb'd, Am I stuffed? Or will I be fine? Can I capture them whilst its jailbroken?

Dan - September 10, 2009 at 7:51pm

I have a 16gb 3GS currently running 3.0.1. I have tried this process many times (with the phone plugged in normal, in recovery mode, in DFU mode) and cannot get itunes to load the iPhone2,1_3.0_7A341_Restore.ipsw firmware to my phone. Every time it just says that my device is not eligible for this firmware. What can I do? Is there a way of blocking itunes from checking eligibility and just installing? Or is there an app I can install on the phone to fetch the iBEC and iBSS straight out?

qblake - November 28, 2009 at 7:53pm

I'm not sure if this will work, but it's worth a try and doesn't require any restoring. Download the firmware, then make a copy and change the file extension from .ipsw to .zip, unzip it, go to Firmware/dfu and there you go! The iBEC and iBSS are there!

Joe - August 13, 2009 at 1:31pm

Hello I am only getting the iBEC.n88ap.RELEASE.dfu one and no IBSS. I have tried the grabber and manually, but cant find that file. I have the 3GS with 3.0.1 firmware. Can any one advise me? Thank you

Joe - August 13, 2009 at 1:35pm

I forgot to mention I am running Windows XP and itunes 8.2.1.6 , Please help before I kick this phone at a wall. :P

nick - September 13, 2009 at 12:20pm

Try upgrading your itunes to 9.0

Rand - August 4, 2009 at 2:53pm

Thanks. Got the ibes but could not get the ibss...and currently give up. Had problems getting into the dfu mode (or out of it for that matter)....then when itunes finally worked out it forced me to update to 3.0.1....(trial 1) and then restored with shift restore to 3.0 version...both times grabbed the temp file...both times it showed up as ibec... not the ibss file....so i hope the ibec file is enough as I give up...for now!

manu - July 19, 2009 at 1:21am

i just bought a new iphone 3gs today and tried this and i think i just 'bricked' my iphone. i'm not able to restore it using the apple provided update, nor can i restore it using the firmware provided at the link from iclarified. i don't know if this has happened to anybody else but if anyone can help i'd really appreciate it. i keep getting the following error: the iphone "iphone" could not be restored. an unknown error occurred (14). i'm using windows 7 but tried restoring it on two other computers; one running windows vista & the other running windows xp. i've been searching online for a the last few hours with no luck! one person said, their iphone started working the next morning when they tried to restore it so i'm kinda hoping i end up in the same situation but if not i'm screwed. or well i guess ill have to take it to the apple store.

Paul I - July 21, 2009 at 1:18am

I just tried the initial restore on 8.2.0.23 and I kept getting the same error you did. I installed 8.2.1 and it has worked fine so far... I'm not out of the woods yet though. I think I forgot the password to my backup!

Gal - July 18, 2009 at 5:09pm

Hello, can i preform this actions with itunes 8.2.1? please advice Thx

Kacy - December 2, 2011 at 1:53pm

Normally I'm agansit killing but this article slaughtered my ignorance.

brandon - July 15, 2009 at 10:14pm

Does someone know if I need to re-capture these files each time I restore? Or does the "signature" in these files NOT change with each restore??? Thanks for the help

daniel - August 4, 2009 at 11:12am

hey @ brandon, each time apple will send u a different certificate but it is custom to your iphone. even though there will be differences in the certs apple sends you, if you save any of them then they will work no probs because they are officially signed. and after that there is no more validation.

smack - July 12, 2009 at 10:35pm

C:\Users\All Users\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu On Vista this is where i found my iBSS file as well. Even using the Grabber program it just does not show up tin the %temp% directory.

Jesse Dukes - August 27, 2009 at 8:05pm

Thanks for the note, that's exactly what I was looking for. In XP the directory to find BOTH files is C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu I assume that they are there while doing the restore in DFU mode.

dddccc - July 11, 2009 at 8:43pm

in my case I grabbed both files, BUT there were no questions reg. restoring "as a new phone" or "restore from backup...". iTunes asks me for the personalö information to complete the account activation. is it jusual? Do I need to do it? tx

Yousif - July 11, 2009 at 12:04pm

Do I need to do this if my iPhone 3GS is factory unlocked? Is it important for the unlock or the jellbreak?

dani - July 10, 2009 at 4:18am

3rd try to grab the files was the lucky one :). ieee! you only have like 1-2 seconds to copy them

Chad - July 9, 2009 at 1:22pm

Ok people...if you want your IBEC and IBSS files this is the easiest solution I have found! Go to this link "http://difrnt.com/blog/?p=25" and download IBEC IBSS Grabber...unzip it and read the .txt file. You will run the program, specify a file location, click "start watching" and then put your 3GS into DFU mode and restore....VOILA! Works perfectly and no stress trying to catch the IBSS file that everyone is missing. I did this in VISTA.

Miljbee - July 10, 2009 at 8:37am

Yes, I agree, really easiest, and you only need the dfu part, not the first one. You will get the two files from dfu mode. Tested on W7 64 FR

3gs user - July 11, 2009 at 12:47am

great job man thx, works fine , but one question i got 3 folders .tmp did u ? witch are the 2 good cerificates? is there a way to know? thx

Chad - July 11, 2009 at 10:40am

Yes...I got 3 also....the one u want is the first folder...the one that has both the IBEC and IBSS files. The second folder will only have IBEC and the third folder won't even have a DFU subfolder. Hope this helps.

lunais - July 8, 2009 at 11:11pm

This is BS, even in DFU mode the first temp folder that appears either cant be copied because the file is in use by another program, or contains the iBec file

lunais - July 8, 2009 at 11:43pm

After hours and hours of restoring, I finally got BOTH files, not just IBEC

Adria Richards, ButYoureAGirl.com - July 7, 2009 at 9:29pm

Ok, here what worked for me because I too want to capture these files so future jailbreaks from The Dev Team are easy. Watch the video by TheVincentLee where he goes through the whole process including putting your phone into FDU http://www.youtube.com/watch?v=34FA6M-hhQ0 Use dirfnt's tool to capture/copy the folders for you and after the restore, search for. dfu http://difrnt.com/blog/?p=25 I tried the manual method a few times and kept missting the iBSS file too

Ulrik - July 8, 2009 at 9:25pm

Good advice! The youtube video link is broken, but it is fairly easy to get into DFU mode. The iBEC & iBSS grabber tool is excellent though - saves you from a bit of a hassle :)

Adria Richards - July 8, 2009 at 11:32pm

OMG! They suspended VincentLee's YouTube account! I wonder if it was because of the Apple Jailbreak videos?

kenneth - July 7, 2009 at 8:09pm

TO EVERYONE WHO IS ONLY ABLE TO GET THE IBEC FILE: I had one of those "doh" hit my hand on my head moments: make sure you are in complete DFU mode. This is different from the soft DFU mode. Watch this clip and you will be on your way: http://www.youtube.com/watch?v=34FA6M-hhQ0 (took me 4 times to finally realize this!)

ace731 - July 7, 2009 at 10:27pm

ok i just got a replacement 3GS and i was able to get teh iBSS file with the old phone i had, but doing the same method i am unable to get the iBSS file. the iBEC file shows up but not the iBSS. any ideas?

PeterLeshaw - July 8, 2009 at 7:30pm

The link to the youtube file that shows how to put th iPhone in complete DFU mode has been taken down. Anyone know where we can find new directions to put the iphone in complete DFU mode to get the iBSS files?

KennethToronto - July 8, 2009 at 7:38pm

Instructions for putting the iphone into complete DFU: 1) Iphone should be on and plugged in to itunes 2) press and hold power and home keys for ten seconds (actually hold it for ten seconds) 3) let go of power key but keep home key pressed 4) let go of home key when itunes reports that your phone is connected in recovery mode

spoonyg - July 12, 2009 at 11:12pm

bump on this as it turned out to be my problem. I could never get the iBSS file, even after using the grabber tool, until i realized that I wasn't in complete DFU mode. Once i was in complete DFU mode (like Kenneth describes), it worked like a charm and i got both files.

qzack - July 7, 2009 at 6:19pm

I cant get the IBSS file... i ran though the process three times now and I keep getting the IBEC only.. any ideas??

Mira3GS - July 6, 2009 at 3:48pm

I only get files that say Per14.tmp or Per15.tmp. The one I need won't show up. Suggestions?

bijibijmak - July 5, 2009 at 12:10pm

Hi. I can't get to dawnload the update at step two. Maybe because of the internet censorship in Iran. It downloads only 70 Mb and then stalls. Could anyone please give me another link to this download, probably a torrent. Thanx.

Yousif - July 11, 2009 at 12:00pm

use a good download accelerator, or just use Firefox to download the link

Bob - July 4, 2009 at 12:03am

Just did mine got both files and new certification,waiting on dev team. They will come through soon. I hope the jailbreak isn't as much hassle as retrieving these files.

More Comments