How To: Auslesen von iBEC- und iBSS-Daten des iPhone 3GS (unter Windows)

POST

MAIL

Posted July 1, 2009 at 10:25pm by iClarified

Für ein How To unter Mac klicke
hier

**WICHTIG: Es scheint, als ob es möglich ist, dass man sowohl die iBEC- als auch die iBSS-Daten im DFU-Modus auslesen kann. Wenn du es nur im DFU-Modus ausprobieren willst, dann überspringe Schritt 4 und gehe direkt zu Schritt 6.

Schritt Eins
Drück die Windows-Taste + R-Taste um den "Run Dialog" aufzurufen. Tipp in das Eingabefeld %temp% und klick OK.

How To: Auslesen von iBEC- und iBSS-Daten des iPhone 3GS (unter Windows)

Dadurch wird der "Temp"-Ordner zu dem jeweiligen Windows-Benutzer geöffnet. Ordne die darin befindlichen Dateien so, dass die neusten (geänderten) Dateien oben sind. Scroll dann runter zum Anfang der Ordnerliste.

Wichtig: es muss eingestellt sein, dass man versteckte Ordner und Dateien angezeigt bekommt. Um dies unter Vista einzustellen, klicke auf Organisieren im Ordnerfenster auf der Toolbar und anschließend auf Ordner- und Suchoptionen.

Unter dem Reiter Ansicht sucht ihr nach der Option Alle Dateien und Ordner anzeigen und dann auf OK

Schritt Zwei
Erstelle einen neuen Ordner auf deinem Desktop und nenne diesen Pwnage und füge in diesen die 3.0 Firmware ein. Du kannst die Firmware von hier downloaden.

Schritt Drei
Starte iTunes.

Schritt Vier
Stelle sicher, dass das iPhone am Computer angeschlossen ist und wähle es anschließend aus der links erscheinenden Leiste aus um in das unten abgebildete Fenster in iTunes zu gelangen. Halte nun die Shift-Taste und klicke dabei auf den Wiederherstellen-Button.

Wähle die iPhone2,1_3.0_7A341_Restore.ipsw -Datei aus dem auf dem Desktop erstellen Pwnage-Ordner aus und klicke auf den Öffnen-Button.

Das iPhone wird nun die Wiederherstellung der 3.0-Firmware beginnen. Eine Warnung erscheint, die beinhaltet, dass sämtliche Daten auf dem iPhone gelöscht werden. Klicke dann auf den Wiederherstellen-Button um fort zu fahren..

Schritt Fünf
Achte während dem Wiederherstellungsvorgang auf den geöffneten %TEMP% -Ordner.Es wird darin ein Ordner mit dem etwaigen Namen Per518D.tmp erscheinen. Wenn dieser erscheint, markiere ihn und drücke auf deiner Tastatur STRG+C um ihn in den Clipboard zu kopieren..

Klicke dann wieder auf den noch immer geöffneten Pwnage -Ordner und klicke STRG+V um den eben kopierten Ordner dort ein zu fügen..

**Wichtig: man hat nur limitiert Zeit um dies durch zu führen, der in %TEMP% erstellte Ordner wird schnell wieder gelöscht werden. Es sieht so aus, dass drei mal ein Ordner im %TEMP%-Ordner erstellt wird während des DFU-Wiederherstellungsprozesses. Man braucht den zu erst erscheinenden ordner!

Schritt Sechs
Sobald der Wiederherstellungsprozess abgeschlossen ist, erscheint die Meldung, ob das Gerät aus einem Backup oder als ein neues Gerät konfiguriert werden soll. Um die alten Einstellungen zu übernehmen, klicke auf Vom Backup von: anschließend auf Weiter.

Schritt Sieben
Sobald das backup wiederhergestellt worden ist, werden wir nochmals eine Wiederherstellung machen müssen im DFU-Mode um die iBSS-Daten zu bekommen. Um dies zu machen folge diesen Schritten um dein iPhone in den DFU-Modus zu versetzen.

iTunes wird melden, dass es ein iPhone im "Recovery-Modus" gefunden hat.
Klicke "Okay" und halte dann die Shift-Taste und dabei auf den Wiederherstellen-Button.

Wähle die iPhone2,1_3.0_7A341_Restore.ipsw aus dem Pwnage Ordner vom Desktop und anschließend wieder auf Öffnen.

Schritt Acht
Achte während dem Wiederherstellungsvorgang auf den geöffneten %TEMP% -Ordner.Es wird darin ein Ordner mit dem etwaigen Namen PerD112.tmp erscheinen. Wenn dieser erscheint, markiere ihn und drücke auf deiner Tastatur STRG+C um ihn in den Clipboard zu kopieren.

Wechsel dann wieder auf den noch immer geöffneten Pwnage -Ordner und klicke STRG+V um den eben kopierten Ordner dort ein zu fügen.

**Vergiss nicht: du hast nur begrenzt Zeit, dies zu machen, bevor der Ordner wieder gelöscht wird..

Schritt Neun
Sobald der Wiederherstellungsprozess abgeschlossen ist, erscheint die Meldung, ob das Gerät aus einem Backup oder als ein neues Gerät konfiguriert werden soll. Um deine alten Einstellungen zu übernehmen, klicke auf Vom Backup von: abschließend auf Weiter.

Schritt Zehn
Fertig!
Das sind die iBEC und iBSS Daten, die du für den baldigen Jailbreak benötigen wirst!

Um sicherzugehen, dass du auch die Dateien hast, schau in den jeweiligen Ordnern Pwnage/Per????.tmp/Firmware/dfu nach diesen beiden Dateien: iBEC.n88ap.RELEASE.dfu und iBSS.n88ap.RELEASE.dfu

Follow iClarified

devileye2002 - September 23, 2009 at 4:55pm

i've updated my phone by wrong to apple 3.1 firmware so does it worth to Capture iBEC and iBSS ?

Reply · Like

Jamie Barrett - September 13, 2009 at 4:36am

I didn't capture any details before I jb'd, Am I stuffed? Or will I be fine? Can I capture them whilst its jailbroken?

Dan - September 10, 2009 at 7:51pm

I have a 16gb 3GS currently running 3.0.1. I have tried this process many times (with the phone plugged in normal, in recovery mode, in DFU mode) and cannot get itunes to load the iPhone2,1_3.0_7A341_Restore.ipsw firmware to my phone. Every time it just says that my device is not eligible for this firmware. What can I do? Is there a way of blocking itunes from checking eligibility and just installing? Or is there an app I can install on the phone to fetch the iBEC and iBSS straight out?

qblake - November 28, 2009 at 7:53pm

I'm not sure if this will work, but it's worth a try and doesn't require any restoring. Download the firmware, then make a copy and change the file extension from .ipsw to .zip, unzip it, go to Firmware/dfu and there you go! The iBEC and iBSS are there!

Joe - August 13, 2009 at 1:31pm

Hello I am only getting the iBEC.n88ap.RELEASE.dfu one and no IBSS. I have tried the grabber and manually, but cant find that file. I have the 3GS with 3.0.1 firmware. Can any one advise me? Thank you

Joe - August 13, 2009 at 1:35pm

I forgot to mention I am running Windows XP and itunes 8.2.1.6 , Please help before I kick this phone at a wall. :P

nick - September 13, 2009 at 12:20pm

Try upgrading your itunes to 9.0

Rand - August 4, 2009 at 2:53pm

Thanks. Got the ibes but could not get the ibss...and currently give up. Had problems getting into the dfu mode (or out of it for that matter)....then when itunes finally worked out it forced me to update to 3.0.1....(trial 1) and then restored with shift restore to 3.0 version...both times grabbed the temp file...both times it showed up as ibec... not the ibss file....so i hope the ibec file is enough as I give up...for now!

manu - July 19, 2009 at 1:21am

i just bought a new iphone 3gs today and tried this and i think i just 'bricked' my iphone. i'm not able to restore it using the apple provided update, nor can i restore it using the firmware provided at the link from iclarified. i don't know if this has happened to anybody else but if anyone can help i'd really appreciate it. i keep getting the following error: the iphone "iphone" could not be restored. an unknown error occurred (14). i'm using windows 7 but tried restoring it on two other computers; one running windows vista & the other running windows xp. i've been searching online for a the last few hours with no luck! one person said, their iphone started working the next morning when they tried to restore it so i'm kinda hoping i end up in the same situation but if not i'm screwed. or well i guess ill have to take it to the apple store.

Paul I - July 21, 2009 at 1:18am

I just tried the initial restore on 8.2.0.23 and I kept getting the same error you did. I installed 8.2.1 and it has worked fine so far... I'm not out of the woods yet though. I think I forgot the password to my backup!

Gal - July 18, 2009 at 5:09pm

Hello, can i preform this actions with itunes 8.2.1? please advice Thx

Kacy - December 2, 2011 at 1:53pm

Normally I'm agansit killing but this article slaughtered my ignorance.

brandon - July 15, 2009 at 10:14pm

Does someone know if I need to re-capture these files each time I restore? Or does the "signature" in these files NOT change with each restore??? Thanks for the help

daniel - August 4, 2009 at 11:12am

hey @ brandon, each time apple will send u a different certificate but it is custom to your iphone. even though there will be differences in the certs apple sends you, if you save any of them then they will work no probs because they are officially signed. and after that there is no more validation.

smack - July 12, 2009 at 10:35pm

C:\Users\All Users\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu On Vista this is where i found my iBSS file as well. Even using the Grabber program it just does not show up tin the %temp% directory.

Jesse Dukes - August 27, 2009 at 8:05pm

Thanks for the note, that's exactly what I was looking for. In XP the directory to find BOTH files is C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu I assume that they are there while doing the restore in DFU mode.

dddccc - July 11, 2009 at 8:43pm

in my case I grabbed both files, BUT there were no questions reg. restoring "as a new phone" or "restore from backup...". iTunes asks me for the personalö information to complete the account activation. is it jusual? Do I need to do it? tx

Yousif - July 11, 2009 at 12:04pm

Do I need to do this if my iPhone 3GS is factory unlocked? Is it important for the unlock or the jellbreak?

dani - July 10, 2009 at 4:18am

3rd try to grab the files was the lucky one :). ieee! you only have like 1-2 seconds to copy them

Chad - July 9, 2009 at 1:22pm

Ok people...if you want your IBEC and IBSS files this is the easiest solution I have found! Go to this link "http://difrnt.com/blog/?p=25" and download IBEC IBSS Grabber...unzip it and read the .txt file. You will run the program, specify a file location, click "start watching" and then put your 3GS into DFU mode and restore....VOILA! Works perfectly and no stress trying to catch the IBSS file that everyone is missing. I did this in VISTA.

Miljbee - July 10, 2009 at 8:37am

Yes, I agree, really easiest, and you only need the dfu part, not the first one. You will get the two files from dfu mode. Tested on W7 64 FR

3gs user - July 11, 2009 at 12:47am

great job man thx, works fine , but one question i got 3 folders .tmp did u ? witch are the 2 good cerificates? is there a way to know? thx

Chad - July 11, 2009 at 10:40am

Yes...I got 3 also....the one u want is the first folder...the one that has both the IBEC and IBSS files. The second folder will only have IBEC and the third folder won't even have a DFU subfolder. Hope this helps.

lunais - July 8, 2009 at 11:11pm

This is BS, even in DFU mode the first temp folder that appears either cant be copied because the file is in use by another program, or contains the iBec file

lunais - July 8, 2009 at 11:43pm

After hours and hours of restoring, I finally got BOTH files, not just IBEC

Adria Richards, ButYoureAGirl.com - July 7, 2009 at 9:29pm

Ok, here what worked for me because I too want to capture these files so future jailbreaks from The Dev Team are easy. Watch the video by TheVincentLee where he goes through the whole process including putting your phone into FDU http://www.youtube.com/watch?v=34FA6M-hhQ0 Use dirfnt's tool to capture/copy the folders for you and after the restore, search for. dfu http://difrnt.com/blog/?p=25 I tried the manual method a few times and kept missting the iBSS file too

Ulrik - July 8, 2009 at 9:25pm

Good advice! The youtube video link is broken, but it is fairly easy to get into DFU mode. The iBEC & iBSS grabber tool is excellent though - saves you from a bit of a hassle :)

Adria Richards - July 8, 2009 at 11:32pm

OMG! They suspended VincentLee's YouTube account! I wonder if it was because of the Apple Jailbreak videos?

kenneth - July 7, 2009 at 8:09pm

TO EVERYONE WHO IS ONLY ABLE TO GET THE IBEC FILE: I had one of those "doh" hit my hand on my head moments: make sure you are in complete DFU mode. This is different from the soft DFU mode. Watch this clip and you will be on your way: http://www.youtube.com/watch?v=34FA6M-hhQ0 (took me 4 times to finally realize this!)

ace731 - July 7, 2009 at 10:27pm

ok i just got a replacement 3GS and i was able to get teh iBSS file with the old phone i had, but doing the same method i am unable to get the iBSS file. the iBEC file shows up but not the iBSS. any ideas?

PeterLeshaw - July 8, 2009 at 7:30pm

The link to the youtube file that shows how to put th iPhone in complete DFU mode has been taken down. Anyone know where we can find new directions to put the iphone in complete DFU mode to get the iBSS files?

KennethToronto - July 8, 2009 at 7:38pm

Instructions for putting the iphone into complete DFU: 1) Iphone should be on and plugged in to itunes 2) press and hold power and home keys for ten seconds (actually hold it for ten seconds) 3) let go of power key but keep home key pressed 4) let go of home key when itunes reports that your phone is connected in recovery mode

spoonyg - July 12, 2009 at 11:12pm

bump on this as it turned out to be my problem. I could never get the iBSS file, even after using the grabber tool, until i realized that I wasn't in complete DFU mode. Once i was in complete DFU mode (like Kenneth describes), it worked like a charm and i got both files.

qzack - July 7, 2009 at 6:19pm

I cant get the IBSS file... i ran though the process three times now and I keep getting the IBEC only.. any ideas??

Mira3GS - July 6, 2009 at 3:48pm

I only get files that say Per14.tmp or Per15.tmp. The one I need won't show up. Suggestions?

bijibijmak - July 5, 2009 at 12:10pm

Hi. I can't get to dawnload the update at step two. Maybe because of the internet censorship in Iran. It downloads only 70 Mb and then stalls. Could anyone please give me another link to this download, probably a torrent. Thanx.

Yousif - July 11, 2009 at 12:00pm

use a good download accelerator, or just use Firefox to download the link

Bob - July 4, 2009 at 12:03am

Just did mine got both files and new certification,waiting on dev team. They will come through soon. I hope the jailbreak isn't as much hassle as retrieving these files.

More Comments