Comment capturer les infos iBEC et iBSS de votre iphone 3Gs ( sous windows )

POST

MAIL

Posted July 1, 2009 at 10:25pm by iClarified

Voici la méthode pour capturer les infos iBEC et iBSS de votre iphone 3Gs qui seront nécessaires pour le futur jailbreak de l'appareil.

Étape 1
Appuyez sur la touche Windows + R afin de lancer la commande executer. Dans le champ de saisie tapez %temp% cliquez ensuite sur OK.

Comment capturer les infos iBEC et iBSS de votre iphone 3Gs ( sous windows )

Cela va ouvrir le dossier temporaire de Windows pour votre session. Vérifiez que les fichiers sont bien triés par date de modification avec le plus récent en premier. Descendez jusqu'au début de la liste des dossiers.

Vous devez avoir activé l'affichage des fichiers et dossiers cachés. Dans vista vous pouvez l'activer en allant dans Organiser dans la barre de navigation, ensuite sélectionnez Options des dossiers et de recherches.

Dans l'onglet Affichage de la fenêtre, choisissez Affichez les fichiers, dossiers cachés ensuite cliquez sur OK

Étape 2
Créer un nouveau dossier sur votre bureau, appelez-le Pwnage Placez le fichier firmware 3.0 dans le dossier. Vous pouvez télécharger le firmware ici

Étape 3
Lancez iTunes depuis le menu programmes.

Étape 4
Vérifiez que votre iphone 3Gs est bien connecté à l'ordinateur, ensuite sélectionnez le dans la liste des périphériques à gauche dans itunes. Maintenez la touche Shift appuyée et cliquez sur le bouton Restore

Selectionnez le fichier iPhone2,1_3.0_7A341_Restore.ipsw dans le dossier Pwnage sur votre bureau et cliquez sur le bouton Ouvrir.

Votre iphone va maintenant être restoré en 3.0. Vous allez être avertit que votre iphone va être éffacé. Cliquez sur le bouton Restaurer pour continuer.

Étape 5
Quand le restorea commencé, retournez dans le dossier %TEMP% ouvert précédemment. Un nouveau dossier est apparu avec un nom ressemblant à Per518D.tmp. Quand le dossier est apparu, selectionnez le, appuyez sur Ctrl+c pour le copier dans le presse papier.

Allez dans le dossier Pwnage sur le bureau est appuyez sur Control+v pour coller le fichier dans le dossier.

**Attention il n'y a qu'un court moment pour cette opération, le fichier est supprimé par itunes rapidement.

Étape 6
Quand la restauration est terminée, itunes va vous demander de restaurer à partir d'une sauvegarde ou de le configurer comme un nouvel iphone. Pour conserver vos paramètres, sélectionnez Restaurer à partir de la sauvegarde: ensuite cliquez sur le bouton Continuer

Étape 7
Une fois la restauration terminée, nous allons devoir faire une nouvelle restauration en mode DFU afin d'obtenir les infos iBSS. Pour cela, suivez ce tuto afin de passer en mode DFU.

iTunes va indiquer qu'il à détecter un iphone en mode restauration.
Cliquez sur OK ensuite maintenez la touche Shift appuyée et cliquez sur Restaurer

Selectionnez le fichier iPhone2,1_3.0_7A341_Restore.ipsw dans le dossier Pwnage sur le bureau et cliquez sur le bouton Ouvrir .

Votre iphone va maintenant être restauré en 3.0. Vous allez être avertit que l'iphone va être effacé. Cliquez sur le bouton Restaurer pour continuer.

Étape 8
Quand la restauration en mode DFU est lancée, regardez dans le dossier TEMP ouvert précédemment. Un nouveau fichier est apparu avec un nom comme PerD112.tmp. Quand ce dossier est apparut, sélectionnez le, appuyez sur Control+c pour le copier dans le presse papier.

Rendez vous dans le dossier Pwnage sur votre bureau et appuyez sur Control+v pour coller le fichier dans le dossier.

**Une fois de plus, il y a un temps limite pour réaliser cette opérations, sinon le fichier est supprimé par itunes.

Étape 9
Quand la restauration en mode DFU sera terminée, itunes vous proposera de restaurer l'iphone à partir d'une sauvegarde ou de le configurer comme un nouvel iphone. Pour garder vos configurations, sélectionnez restaurer à partir de la sauvegarde: ensuite cliquez sur le bouton Continuer afin de finaliser la restauration.

Étape 10
C'est bon. Nous avons maintenant récupérer les infos iBEC et iBSS. Vous pouvez déplacer ces fichiers dans un endroits sûr afin de les utiliser plus tard pour le jailbreak.

Pour vérifier que vous avez bien les fichiers, allez dans le dossier: Pwnage/Per????.tmp/Firmware/dfu. Vous devriez avoir deux fichiers: iBEC.n88ap.RELEASE.dfu et iBSS.n88ap.RELEASE.dfu

Follow iClarified

devileye2002 - September 23, 2009 at 4:55pm

i've updated my phone by wrong to apple 3.1 firmware so does it worth to Capture iBEC and iBSS ?

Reply · Like

Jamie Barrett - September 13, 2009 at 4:36am

I didn't capture any details before I jb'd, Am I stuffed? Or will I be fine? Can I capture them whilst its jailbroken?

Dan - September 10, 2009 at 7:51pm

I have a 16gb 3GS currently running 3.0.1. I have tried this process many times (with the phone plugged in normal, in recovery mode, in DFU mode) and cannot get itunes to load the iPhone2,1_3.0_7A341_Restore.ipsw firmware to my phone. Every time it just says that my device is not eligible for this firmware. What can I do? Is there a way of blocking itunes from checking eligibility and just installing? Or is there an app I can install on the phone to fetch the iBEC and iBSS straight out?

qblake - November 28, 2009 at 7:53pm

I'm not sure if this will work, but it's worth a try and doesn't require any restoring. Download the firmware, then make a copy and change the file extension from .ipsw to .zip, unzip it, go to Firmware/dfu and there you go! The iBEC and iBSS are there!

Joe - August 13, 2009 at 1:31pm

Hello I am only getting the iBEC.n88ap.RELEASE.dfu one and no IBSS. I have tried the grabber and manually, but cant find that file. I have the 3GS with 3.0.1 firmware. Can any one advise me? Thank you

Joe - August 13, 2009 at 1:35pm

I forgot to mention I am running Windows XP and itunes 8.2.1.6 , Please help before I kick this phone at a wall. :P

nick - September 13, 2009 at 12:20pm

Try upgrading your itunes to 9.0

Rand - August 4, 2009 at 2:53pm

Thanks. Got the ibes but could not get the ibss...and currently give up. Had problems getting into the dfu mode (or out of it for that matter)....then when itunes finally worked out it forced me to update to 3.0.1....(trial 1) and then restored with shift restore to 3.0 version...both times grabbed the temp file...both times it showed up as ibec... not the ibss file....so i hope the ibec file is enough as I give up...for now!

manu - July 19, 2009 at 1:21am

i just bought a new iphone 3gs today and tried this and i think i just 'bricked' my iphone. i'm not able to restore it using the apple provided update, nor can i restore it using the firmware provided at the link from iclarified. i don't know if this has happened to anybody else but if anyone can help i'd really appreciate it. i keep getting the following error: the iphone "iphone" could not be restored. an unknown error occurred (14). i'm using windows 7 but tried restoring it on two other computers; one running windows vista & the other running windows xp. i've been searching online for a the last few hours with no luck! one person said, their iphone started working the next morning when they tried to restore it so i'm kinda hoping i end up in the same situation but if not i'm screwed. or well i guess ill have to take it to the apple store.

Paul I - July 21, 2009 at 1:18am

I just tried the initial restore on 8.2.0.23 and I kept getting the same error you did. I installed 8.2.1 and it has worked fine so far... I'm not out of the woods yet though. I think I forgot the password to my backup!

Gal - July 18, 2009 at 5:09pm

Hello, can i preform this actions with itunes 8.2.1? please advice Thx

Kacy - December 2, 2011 at 1:53pm

Normally I'm agansit killing but this article slaughtered my ignorance.

brandon - July 15, 2009 at 10:14pm

Does someone know if I need to re-capture these files each time I restore? Or does the "signature" in these files NOT change with each restore??? Thanks for the help

daniel - August 4, 2009 at 11:12am

hey @ brandon, each time apple will send u a different certificate but it is custom to your iphone. even though there will be differences in the certs apple sends you, if you save any of them then they will work no probs because they are officially signed. and after that there is no more validation.

smack - July 12, 2009 at 10:35pm

C:\Users\All Users\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu On Vista this is where i found my iBSS file as well. Even using the Grabber program it just does not show up tin the %temp% directory.

Jesse Dukes - August 27, 2009 at 8:05pm

Thanks for the note, that's exactly what I was looking for. In XP the directory to find BOTH files is C:\Documents and Settings\All Users\Application Data\Apple Computer\iTunes\iPhone Temporary Files\Firmware\dfu I assume that they are there while doing the restore in DFU mode.

dddccc - July 11, 2009 at 8:43pm

in my case I grabbed both files, BUT there were no questions reg. restoring "as a new phone" or "restore from backup...". iTunes asks me for the personalö information to complete the account activation. is it jusual? Do I need to do it? tx

Yousif - July 11, 2009 at 12:04pm

Do I need to do this if my iPhone 3GS is factory unlocked? Is it important for the unlock or the jellbreak?

dani - July 10, 2009 at 4:18am

3rd try to grab the files was the lucky one :). ieee! you only have like 1-2 seconds to copy them

Chad - July 9, 2009 at 1:22pm

Ok people...if you want your IBEC and IBSS files this is the easiest solution I have found! Go to this link "http://difrnt.com/blog/?p=25" and download IBEC IBSS Grabber...unzip it and read the .txt file. You will run the program, specify a file location, click "start watching" and then put your 3GS into DFU mode and restore....VOILA! Works perfectly and no stress trying to catch the IBSS file that everyone is missing. I did this in VISTA.

Miljbee - July 10, 2009 at 8:37am

Yes, I agree, really easiest, and you only need the dfu part, not the first one. You will get the two files from dfu mode. Tested on W7 64 FR

3gs user - July 11, 2009 at 12:47am

great job man thx, works fine , but one question i got 3 folders .tmp did u ? witch are the 2 good cerificates? is there a way to know? thx

Chad - July 11, 2009 at 10:40am

Yes...I got 3 also....the one u want is the first folder...the one that has both the IBEC and IBSS files. The second folder will only have IBEC and the third folder won't even have a DFU subfolder. Hope this helps.

lunais - July 8, 2009 at 11:11pm

This is BS, even in DFU mode the first temp folder that appears either cant be copied because the file is in use by another program, or contains the iBec file

lunais - July 8, 2009 at 11:43pm

After hours and hours of restoring, I finally got BOTH files, not just IBEC

Adria Richards, ButYoureAGirl.com - July 7, 2009 at 9:29pm

Ok, here what worked for me because I too want to capture these files so future jailbreaks from The Dev Team are easy. Watch the video by TheVincentLee where he goes through the whole process including putting your phone into FDU http://www.youtube.com/watch?v=34FA6M-hhQ0 Use dirfnt's tool to capture/copy the folders for you and after the restore, search for. dfu http://difrnt.com/blog/?p=25 I tried the manual method a few times and kept missting the iBSS file too

Ulrik - July 8, 2009 at 9:25pm

Good advice! The youtube video link is broken, but it is fairly easy to get into DFU mode. The iBEC & iBSS grabber tool is excellent though - saves you from a bit of a hassle :)

Adria Richards - July 8, 2009 at 11:32pm

OMG! They suspended VincentLee's YouTube account! I wonder if it was because of the Apple Jailbreak videos?

kenneth - July 7, 2009 at 8:09pm

TO EVERYONE WHO IS ONLY ABLE TO GET THE IBEC FILE: I had one of those "doh" hit my hand on my head moments: make sure you are in complete DFU mode. This is different from the soft DFU mode. Watch this clip and you will be on your way: http://www.youtube.com/watch?v=34FA6M-hhQ0 (took me 4 times to finally realize this!)

ace731 - July 7, 2009 at 10:27pm

ok i just got a replacement 3GS and i was able to get teh iBSS file with the old phone i had, but doing the same method i am unable to get the iBSS file. the iBEC file shows up but not the iBSS. any ideas?

PeterLeshaw - July 8, 2009 at 7:30pm

The link to the youtube file that shows how to put th iPhone in complete DFU mode has been taken down. Anyone know where we can find new directions to put the iphone in complete DFU mode to get the iBSS files?

KennethToronto - July 8, 2009 at 7:38pm

Instructions for putting the iphone into complete DFU: 1) Iphone should be on and plugged in to itunes 2) press and hold power and home keys for ten seconds (actually hold it for ten seconds) 3) let go of power key but keep home key pressed 4) let go of home key when itunes reports that your phone is connected in recovery mode

spoonyg - July 12, 2009 at 11:12pm

bump on this as it turned out to be my problem. I could never get the iBSS file, even after using the grabber tool, until i realized that I wasn't in complete DFU mode. Once i was in complete DFU mode (like Kenneth describes), it worked like a charm and i got both files.

qzack - July 7, 2009 at 6:19pm

I cant get the IBSS file... i ran though the process three times now and I keep getting the IBEC only.. any ideas??

Mira3GS - July 6, 2009 at 3:48pm

I only get files that say Per14.tmp or Per15.tmp. The one I need won't show up. Suggestions?

bijibijmak - July 5, 2009 at 12:10pm

Hi. I can't get to dawnload the update at step two. Maybe because of the internet censorship in Iran. It downloads only 70 Mb and then stalls. Could anyone please give me another link to this download, probably a torrent. Thanx.

Yousif - July 11, 2009 at 12:00pm

use a good download accelerator, or just use Firefox to download the link

Bob - July 4, 2009 at 12:03am

Just did mine got both files and new certification,waiting on dev team. They will come through soon. I hope the jailbreak isn't as much hassle as retrieving these files.

More Comments