Как да отключим и активирате iPhone OS 3.0 чрез RedSn0w (Windows)

POST

MAIL

Posted June 21, 2009 at 3:46pm by iClarified

Това са инструкции как да отключите и активирате 3.0 iPhone firmware с помощта на RedSn0w за Windows. Версията за потребители на Mac се намира тук

Това упътване може да се използва за отключване на iPhone 3G преди да се разкодира с помощта на UltraSn0w.

Първа стъпка
Направете папка на работния плот с името Pwnage

Изтеглете RedSn0w от тук или тук и го поставете в папката Pwnage. Също така изтеглете в същата папка последната версия на софтуера 3.0 за вашия модел на iPhone от линковете по-долу.

3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw
3.0.0 (3G): iPhone1,2_3.0_7A341_Restore.ipsw

Разархивирайте RedSn0w в папка Pwnagе.

Как да отключим и активирате iPhone OS 3.0 чрез RedSn0w (Windows)

Втора стъпка
Свържете вашия iPhone към компютъра и стартирайте iTunes.

Изберете вашия iPhone от списъка в ляво. Сега задръжте "shift" и щракнете на бутона Restore. Restore е за предпочитане, понеже няма да заеме допълнително място от вашата памет.на iPhone.

Намерете папката Pwnage на работния плот и изберете правилната версия на софтуера за вашия телефон (ipsw). Натиснете бутона Open за да продължите.

Трета стъпка
След като завърши обновяването на версията на софтуера на вашия iPhone може да стартирате redsnw0w.exe от папката Pwnage.

Четвърта стъпка
След като се отвори RedSn0w натиснете бутона Browse

Пета стъпка
Изберете файла с разширение ipsw, който поставихте по-рано в папката Pwnage и натиснете Open

Шеста стъпка
След като програмата провери файла натиснете бутона Next за да продължите.

Седма стъпка
Проверете дали е избрана Cydia и натиснете бутона Next.
(За потребителите на iPhone 2G поставете отметка и на Unlock за активиране на телефона)

Седма и половина :) стъпка (Само за iPhone 2G ако сте избрали Unlock)
Ще ви бъдат поискани следните два файла, може да ги изтеглите от тук:
3.9BL и 4.6BL

Осма стъпка
Свържете първо телефона към компютъра и след това го спрете. След това натиснете бутона Next

Девета стъпка
RedSn0w сега ще ви дава насоки докато сте в режим DFU.

Натиснете и задръжте Home и Power бутона за 10 секунди.

Пуснете само Power докато продължавате да държите Home бутона натиснат докато RedSn0w засече устройството.

Десета стъпка
Вашият телефон сега ще се рестартира.

Стъпка единадесет
RedSn0w ще започне да качва новия модифициран RAM Disk.

Стъпка дванадесет
Като завърши ще излезе съобщение, че RedSn0w е свършил. Натиснете бутона Finish.
Когато се рестартира iPhone-а (за около 5 минути), той ще е отключен и активиран (за iPhone 2G) с инсталирана Cydia.

Follow iClarified

avi - August 14, 2010 at 8:13am

Hi, I have an iphone 3gs , with 3.1 version & 05.11.07 firmware. Already JB+UL using Cydia/blackra1n . So my question is I want to update to 3.1.3 , will this tutorial work for me , as nowhere mentioned 3Gs here ?

Reply · Like

Tjlinnj - July 6, 2010 at 9:23am

I just got an iphone, and i updated it on itunes, now it says that its version 4,, i thni the firmware is 4,, so when I tried to restore this one here, it didnt work, its say it not compatible.. what should I do , please help :(

jose - March 22, 2010 at 12:56am

WHen i download the curent restore it does come in a cube like the picture but zip books and everytime I try to extract it to my desktop or to my pwnage folder I cant get it to open or what ever I need to do please hellppp!!!!

Simon - March 28, 2010 at 5:54pm

After pressing save as, Change the file type (lowest box in window) to all files from.zip. It will then save as you need it. N.B. Ensure the file name ends .ipsw If not manually type it in before saving.

Sakib - January 21, 2010 at 6:35am

Hi All, I managed to jailbreak my iphone 3g on 3.0 However, when I try opening cydia, it says "loading data" and then automatically crashes" I have jailbreaked many times but no luck. I used the files in the post above but still not working. I have also tried setting the iphone as a new phone in itunes but not working. any ideas???

AA - February 27, 2010 at 10:09pm

Turn on your wifi, connect to a wifi , than try cydia..

coreal - January 19, 2010 at 6:56pm

no errors no probs but there is no cydia on my iphone why?

Liliana - March 18, 2012 at 6:47am

OMG! I finally got to see the video. It kewrod perfectly on my home computer. I LOVED IT!!!!!!!! And the music was SO PERFECT only you could make me happy, only you could make me smile. I was so sad when I lost Dillon, then Phillip's face entered my life and I smiled when I saw it. And when I got him from Dobie Rescue I could once again be happy. That is an amazing video, an amazing portrait, a perfect song to celebrate it all. YOU are an AMAZING artist/person. I am so blessed to have met you and have you in my life!

shawn gavin - January 19, 2010 at 6:45am

If my phone is already 3.0 frimware do i still need to use it ?

Torrentmastah - January 13, 2010 at 7:31am

Hi When you choose "iPhone1,2_3.0.1_7A400_Restore.ipsw" in redsn0w and you get the error message "Unable to recognize specified IPSW" choose "iPhone1,2_3.0_7A341_Restore.ipsw" instead and it should work. If redsn0w 0.8 crashes in Vista when you try to jailbreak then right click on redsnow 0.8.exe and go to properties and in there go to compatibility there set it to "windows xp service pack 2" and then go down and check the "run as administrator" Run the process again and it should work. It worked it for me Hope this to some help.

Greg - January 9, 2010 at 8:32am

i suggest not updating the carrier settings after the jailbreak. I launched itunes and it prompted me to update the carrier settings i did it and I couldn't connect to the network overseas anymore so i have to restore the software with itunes and the backup which took another hour or more.

Jacob - January 2, 2010 at 2:36pm

Worked Great ! Thanks

anjoi - December 13, 2009 at 7:42am

Thank you very much for this very helpful thread, now my iphone 3g is updated to OS3.0, jailbroken and unlocked. Even the comments and reply to the comments were very useful. Thanx to iclarified and to all those who shared helpful insights in the comment section.

Shubham - March 15, 2012 at 9:51am

bombinos memorandum capled an observative post today on iPhone 818b 8289WordPress 81 9086 8292 8c 8188 828b 8397 83 82 82 83 sup

SUNHANG - March 18, 2012 at 4:48am

bombinos memorandum apcled an observative post today on iPhone 818b 8289WordPress 81 9086 8292 8c 8188 828b 8397 83 82 82 83 sup

francis pacillo - November 28, 2009 at 12:04am

i do not know how to extract the zip file into the pwnage folder

Dhruva - November 28, 2009 at 3:28pm

Hi Francis, you might need winzip or winrar to extract the folder.

yank - November 27, 2009 at 1:09pm

hy im using iphone bg i hav updated to 3.0 using windows(redsn0w) everything has been done well(AS PER ICLARIFIED STATED) but i cant find network signals and no CARRIER option in SETTING menu. plz help me its d second tym m facing the same problem plz reply Y A N K (9987649785)

Dhruva - November 27, 2009 at 2:08pm

Hi Yank, From what I understand, you need to unlock your phone. This tutorial is only to Jailbreak it, so now that you have done that well, find the tutorial that teaches you how to Unlock your iPhone 3G. That should solve you prob. Good luck!

yank - November 29, 2009 at 12:25pm

hi dhruva thanks a lot 4 replying man

matoh - January 23, 2010 at 3:20pm

hi i have the same problem. did u solve it plz? if so could u advice me how? THNX

Dhruva - November 9, 2009 at 1:38pm

I have a 3G j/b and unlocked iPhone (I j/b and unlocked it when it had 2.2 s/w and baseband was 2.28). After that, I tried re-jailbreaking it and unlocking it to the 3.1.2 with blackra1n. Nothing happened, literally nothing (I'm guessing since the baseband wasn't at 5.11). Then I read details on redsn0w using this tutorial (to j/b and unlock to 3.0.1). I tried that method, but accidentally (i KNOW! crazy huh!) updated the phone to 3.1.2 through iTunes (using a custom ipsw from iClarified though, pressing shift+restore). Now I can't get the phone to work. So both redsn0w and blackra1n didn't work for me because of the accidental update. Is it possible to fix it? Perhaps wait for the next release, or is it of no use? Any help would be REALLYY appreciated. please! Thank you.

Ricki - November 2, 2009 at 6:44am

Does this work on firmware 3.1.2?

Dhruva - November 9, 2009 at 1:41pm

Nope, only the 3.0.1 (or 3.0) for now. Try using blackra1n (there is a tutorial on it), but make sure you read it fully before trying it. or best to just use redsn0w and update to 3.0.1 (depending on ur iPhone's status right now). It is better to check if it matches your iPhone's specifications before using it. Hope this helps.

Aiham - October 30, 2009 at 12:29am

Hi i need help!! i restored my iphone by mistake from the phone settings and later i couldn't open it up. now i have found a way to restore it from iTunes. the problem is that my iphone is now locked and i can't use my SIM CARD. it says i need a valid SIM CARD to Activate your Iphone. i tried some of your tricks but it didnt work i only got ( error 1015 ). could some one please help me ??? and the only thing i se is on the Iphone screen is a white USB an Arrow pointing up and up there is ITunes.

Ray Jr - October 28, 2009 at 4:10am

Ive got a problem, S O S ! Lol. Jailbreaked it. Done with it. Using the new OS (from apple) but in redsnow, identified it using an old OS (the one able to download). Now theres no cydia/icy on my springboard. Can someone help. Thanks!

Kristin - October 22, 2009 at 6:54pm

Hi, so i downloaded all of the things i needed, and when i selected the firmware with itunes, when it was done loading it said that it wouldn't work. i've tried many times, and i'm not sure what's wrong. help, please?

harsha - October 21, 2009 at 12:35am

Hiii, I am using a O2 locked iphone using OS 3.0.1 version.But i tried to jailbreak it. I restored the phone using the IPSW that is available from the URL in this tutorial and later i Ran the Redsn0w.exe file in windows version.But the Redsn0w is not able to recognize or validate the IPSW that is used for restoring my phone.Please can anyone help in this....If u can help please e-mail me iharshavardhan@rediffmail.com. Thanks

Jessica - October 6, 2009 at 5:01am

Need some HELP, Please....... I've the 3G 3.1 version now. The problem is, I can't restore the 3.0 version. So I skipped the first step, then I continue to the Step where I have to click on the Redsnow folder and browse the firmware. I finished all the step, but, by the time my Iphone restart, I still couldn't find the Cydia apps on my Iphone screen. and I lost all my applications. So, i re - jailbreak again, by re- doing the step 3 till finish. What i found in my Iphone screen when it's restarting is an image of a biten pineapple with the words, 'Installing Bundles' . What is that mean? So, what can I do to have the Cydia Apps ? Do i need to dl anything else after this steps ? Anyone can help me, pls... Thanks alot!!! ^^

keviej - October 29, 2009 at 11:55am

Where did you get the 3G 3.1 firmware from. I downloaded the firmware from the instruction but it isn't appearing when I try installing it.

IMatrix - October 5, 2009 at 10:06am

Hi guy, I'm from Argentina. I'm trying to jailbrake my new Iphone 3G but it seems imosible. Y have the last baseband (05.xx.xx) and Filware 3.1. I did all the steps in this tread but Itunes cant finish the restore, cause show me error 1015. I read that it's fine that error, is beacuase i'm trying to downgrade the phone. So I start the RedSn0w, do all the steps and look's like all will work. The problem is we the jailbrake finish the Iphone reboot and get stuck in recovery mode, so I cant use the phone. The only way to reuse the phone is using the recovery from itunes (witout using Shit+Filmware i download). Also try to restoring from itunes with DFO mode.... but show me the same error. Anyway I did all the steps and when the jailbrack was finished the iphone kept on recovery mode. I hope you can help me, I commend you for this page. Thax

More Comments