Jak provést Jailbreak vaeho iPhone na OS 3.0 zapomoci RedSn0w (Windows)
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted June 21, 2009 at 3:46pm by iClarified
Tento návod popisuje, jak provést jailbreak pro iPhone 3.0 firmware za pomoci RedSn0w pro windows.
Tento návod může být použit pro jailbreak předtím, než použijete UltraSn0w.
Krok první Vytvořte složku s názvem Pwnage
Stáhněte RedSn0w z tohoto umístění a umistěte jej do složky Pwnage. Podobně, stáhněte aktuální 3.0 firmware z jednoho z těchto odkazů a umistěte je do stejné složky.
Krok druhý Připojte váš iPhone k počítači a spusťte iTunes.
Vyberte váš iPhone ze seznamu zařízení v levo. Nyní držte shift a klikněte na tlačítko Restore. Restore je preferováno, aby nedošlo k vytvoření zbytečného místa v iPhone.
Proklikejte se do složky Pwnage a vyberte ipsw soubor s firmware. Klikněte na tlačítko Otevřít.
Krok třetí Jakmile iTunes dokončí update vašeho iPhone na požadovaný firmware, můžete spustit redsnw0w.exe ze složky Pwnage.
Krok čtvrtý Jakmile je RedSn0w spuštěn, klikněte na tlačítko Browse
Krok pátý Vyberte ipsw soubor s firmware ze složky Pwnage a klikněte na Open
Krok šestý Jakmile bude váš firmware ověřen,klikněte na tlačítko Next.
Krok sedmý Ujistěte se, že je vybrána Cydia a klikněte na tlačítko Next.
Krok osmý Prosím, připojte váš iPhone k počítači a vypněte jej. Poté klikněte na tlačítko Next.
Krok devět RedSn0w vás nyní provede krok, za krokem postupem pro přechod do módu DFU.
Držte zmáčknuté tlačítko Home a zároveň tlačítko Power po dobu 10 sekund.
Uvolněte tlačítko Power a stále držte zmáčknuté tlačítko Home, dokud RedSn0w nezdetekuje vaše zařízení.
Krok desátý Výš iPhone se nyní znovu spustí.
Krok jedenáctý RedSn0w začne nahrávat nový RAM Disk.
Krok dvanáctý Jakmile je vše dokončeno, budete upozornění, že RedSn0w skončil. Klikněte na tlačítko Finish. Jakmile bude váš iPhone znovu spuštěn (5 minut, nebo více). Bude odemknut a bude na něm Cydia.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Hi,
I have an iphone 3gs , with 3.1 version & 05.11.07 firmware. Already JB+UL using Cydia/blackra1n . So my question is
I want to update to 3.1.3 , will this tutorial work for me , as nowhere mentioned 3Gs here ?
I just got an iphone, and i updated it on itunes, now it says that its version 4,, i thni the firmware is 4,, so when I tried to restore this one here, it didnt work, its say it not compatible.. what should I do , please help :(
WHen i download the curent restore it does come in a cube like the picture but zip books and everytime I try to extract it to my desktop or to my pwnage folder I cant get it to open or what ever I need to do please hellppp!!!!
After pressing save as, Change the file type (lowest box in window) to all files from.zip. It will then save as you need it. N.B. Ensure the file name ends .ipsw If not manually type it in before saving.
Hi All,
I managed to jailbreak my iphone 3g on 3.0
However, when I try opening cydia, it says "loading data" and then automatically crashes"
I have jailbreaked many times but no luck. I used the files in the post above but still not working. I have also tried setting the iphone as a new phone in itunes but not working.
any ideas???
OMG! I finally got to see the video. It kewrod perfectly on my home computer. I LOVED IT!!!!!!!! And the music was SO PERFECT only you could make me happy, only you could make me smile. I was so sad when I lost Dillon, then Phillip's face entered my life and I smiled when I saw it. And when I got him from Dobie Rescue I could once again be happy. That is an amazing video, an amazing portrait, a perfect song to celebrate it all. YOU are an AMAZING artist/person. I am so blessed to have met you and have you in my life!
Hi
When you choose "iPhone1,2_3.0.1_7A400_Restore.ipsw" in redsn0w and you get the error message "Unable to recognize specified IPSW" choose "iPhone1,2_3.0_7A341_Restore.ipsw" instead and it should work.
If redsn0w 0.8 crashes in Vista when you try to jailbreak then right click on redsnow 0.8.exe and go to properties
and in there go to compatibility
there set it to "windows xp service pack 2" and then go down and check the "run as
administrator"
Run the process again and it should work. It worked it for me
Hope this to some help.
i suggest not updating the carrier settings after the jailbreak. I launched itunes and it prompted me to update the carrier settings i did it and I couldn't connect to the network overseas anymore so i have to restore the software with itunes and the backup which took another hour or more.
Thank you very much for this very helpful thread, now my iphone 3g is updated to OS3.0, jailbroken and unlocked. Even the comments and reply to the comments were very useful. Thanx to iclarified and to all those who shared helpful insights in the comment section.
hy im using iphone bg i hav updated to 3.0 using windows(redsn0w) everything has been done well(AS PER ICLARIFIED STATED) but i cant find network signals and no CARRIER option in SETTING menu.
plz help me its d second tym m facing the same problem
plz reply
Y A N K (9987649785)
Hi Yank, From what I understand, you need to unlock your phone. This tutorial is only to Jailbreak it, so now that you have done that well, find the tutorial that teaches you how to Unlock your iPhone 3G. That should solve you prob. Good luck!
I have a 3G j/b and unlocked iPhone (I j/b and unlocked it when it had 2.2 s/w and baseband was 2.28). After that, I tried re-jailbreaking it and unlocking it to the 3.1.2 with blackra1n. Nothing happened, literally nothing (I'm guessing since the baseband wasn't at 5.11). Then I read details on redsn0w using this tutorial (to j/b and unlock to 3.0.1). I tried that method, but accidentally (i KNOW! crazy huh!) updated the phone to 3.1.2 through iTunes (using a custom ipsw from iClarified though, pressing shift+restore). Now I can't get the phone to work. So both redsn0w and blackra1n didn't work for me because of the accidental update. Is it possible to fix it? Perhaps wait for the next release, or is it of no use? Any help would be REALLYY appreciated. please! Thank you.
Nope, only the 3.0.1 (or 3.0) for now. Try using blackra1n (there is a tutorial on it), but make sure you read it fully before trying it. or best to just use redsn0w and update to 3.0.1 (depending on ur iPhone's status right now). It is better to check if it matches your iPhone's specifications before using it. Hope this helps.
Hi i need help!! i restored my iphone by mistake from the phone settings and later i couldn't open it up. now i have found a way to restore it from iTunes. the problem is that my iphone is now locked and i can't use my SIM CARD. it says i need a valid SIM CARD to Activate your Iphone.
i tried some of your tricks but it didnt work i only got ( error 1015 ). could some one please help me ???
and the only thing i se is on the Iphone screen is a white USB an Arrow pointing up and up there is ITunes.
Ive got a problem, S O S ! Lol.
Jailbreaked it. Done with it.
Using the new OS (from apple) but in redsnow, identified it using an old OS (the one able to download).
Now theres no cydia/icy on my springboard.
Can someone help. Thanks!
Hi, so i downloaded all of the things i needed, and when i selected the firmware with itunes, when it was done loading it said that it wouldn't work. i've tried many times, and i'm not sure what's wrong. help, please?
Hiii,
I am using a O2 locked iphone using OS 3.0.1 version.But i tried to jailbreak it. I restored the phone using the IPSW that is available from the URL in this tutorial and later i Ran the Redsn0w.exe file in windows version.But the Redsn0w is not able to recognize or validate the IPSW that is used for restoring my phone.Please can anyone help in this....If u can help please e-mail me iharshavardhan@rediffmail.com.
Thanks
Need some HELP, Please.......
I've the 3G 3.1 version now.
The problem is, I can't restore the 3.0 version. So I skipped the first step, then I continue to the Step where I have to click on the Redsnow folder and browse the firmware. I finished all the step, but, by the time my Iphone restart, I still couldn't find the Cydia apps on my Iphone screen. and I lost all my applications.
So, i re - jailbreak again, by re- doing the step 3 till finish.
What i found in my Iphone screen when it's restarting is an image of a biten pineapple with the words, 'Installing Bundles' . What is that mean?
So, what can I do to have the Cydia Apps ?
Do i need to dl anything else after this steps ?
Anyone can help me, pls... Thanks alot!!! ^^
Hi guy, I'm from Argentina. I'm trying to jailbrake my new Iphone 3G but it seems imosible. Y have the last baseband (05.xx.xx) and Filware 3.1. I did all the steps in this tread but Itunes cant finish the restore, cause show me error 1015. I read that it's fine that error, is beacuase i'm trying to downgrade the phone. So I start the RedSn0w, do all the steps and look's like all will work. The problem is we the jailbrake finish the Iphone reboot and get stuck in recovery mode, so I cant use the phone. The only way to reuse the phone is using the recovery from itunes (witout using Shit+Filmware i download).
Also try to restoring from itunes with DFO mode.... but show me the same error. Anyway I did all the steps and when the jailbrack was finished the iphone kept on recovery mode.
I hope you can help me, I commend you for this page. Thax
![Apple Releases macOS Sequoia 15.2 Beta 4 With Expanded Apple Intelligence Features [Download]](/images/news/95599/95599/95599-160.jpg "Apple Releases macOS Sequoia 15.2 Beta 4 With Expanded Apple Intelligence Features [Download]")
![Apple Seeds watchOS 11.2 Beta 3 to Developers [Download]](/images/news/95598/95598/95598-160.jpg "Apple Seeds watchOS 11.2 Beta 3 to Developers [Download]")
![Apple Releases iOS 18.2 Beta 4 and iPadOS 18.2 Beta 4 With ChatGPT, Genmoji, More [Download]](/images/news/95596/95596/95596-160.jpg "Apple Releases iOS 18.2 Beta 4 and iPadOS 18.2 Beta 4 With ChatGPT, Genmoji, More [Download]")
![Amazon Introduces New Echo Show 21 and Echo Show 15 [Video]](/images/news/95591/95591/95591-160.jpg "Amazon Introduces New Echo Show 21 and Echo Show 15 [Video]")
![Apple iPad 10 On Sale for Just $279 [Lowest Price Ever]](/images/news/95600/95600/95600-160.jpg "Apple iPad 10 On Sale for Just $279 [Lowest Price Ever]")
![Apple 13-inch M3 MacBook Air (16GB RAM) On Sale for $250 Off! [Lowest Price Ever]](/images/news/95594/95594/95594-160.jpg "Apple 13-inch M3 MacBook Air (16GB RAM) On Sale for $250 Off! [Lowest Price Ever]")
![Lowest Price Alert: Save $200 on the New 14-inch M4 MacBook Pro! [Deal]](/images/news/95560/95560/95560-160.jpg "Lowest Price Alert: Save $200 on the New 14-inch M4 MacBook Pro! [Deal]")
![Apple 13-inch M3 MacBook Air (16GB RAM) On Sale for $200 Off! [Lowest Price Ever]](/images/news/95551/95551/95551-160.jpg "Apple 13-inch M3 MacBook Air (16GB RAM) On Sale for $200 Off! [Lowest Price Ever]")
![New 24-inch M4 iMac On Sale for $149 Off! [Lowest Price Ever]](/images/news/95547/95547/95547-160.jpg "New 24-inch M4 iMac On Sale for $149 Off! [Lowest Price Ever]")
