Como obter o ECID do seu iPhone [Windows]

POST

MAIL

Posted May 1, 2010 at 1:06am by iClarified

Instruções para obtenção da informação de ECID do seu iPhone utilizando o Windows.

Primeiro Passo
Coloque seu iphone em "modo de recuperação". Se você não sabe como fazer isso então você pode visitar este tutorial.

Segundo Passo
Inicie o aplicativo USBView . Se você ainda não possúi este aplicativo você pode baixá-lo aqui. Este é um pequeno aplicativo fornecido pela Microsofit.

Como obter o ECID do seu iPhone [Windows]

Terceiro Passo
Clique e selecione Config Discriptors do menu de Opções (options).

Passo Quatro
Clique e selecione Refresh (atualizar) no menu Arquivos (file).

Passo Cinco
Selecione o Apple Recovery (iBoot) aparelho listado na Raiz dos Aplicativos USB (USB Device Tree) no painel esquerdo e depois copie (selecione e depois aperte Control+c) seu ECID das descrições presentes do lado direito.

Follow iClarified

Add Comment

Would you like to be notified when someone replies or adds a new comment?

Yes (All Threads)

Yes (This Thread Only)

Notifications

Would you like to be notified when we post a new Apple news article or tutorial?

Yes

Comments (6)

You must login or register to add a comment...

Add Comment

Andrielly - April 5, 2015 at 7:44am

I would like to consider the oittrpunpoy of saying thanks to you for the professional suggestions I have constantly enjoyed checking out your site. I'm looking forward to the actual commencement of my school research and the complete groundwork would never have been complete without consulting your website. If I can be of any help to others, I'd be thankful to help through what I have discovered from here.

Reply · Like

fiore - March 26, 2013 at 4:18pm

Device Descriptor: bcdUSB: 0x0200 bDeviceClass: 0x00 bDeviceSubClass: 0x00 bDeviceProtocol: 0x00 bMaxPacketSize0: 0x40 (64) idVendor: 0x05AC (Apple Computer) idProduct: 0x1281 bcdDevice: 0x0000 iManufacturer: 0x02 0x0409: "Apple Inc." iProduct: 0x03 0x0409: "Apple Mobile Device (Recovery Mode)" iSerialNumber: 0x04 0x0409: "CPID:8930 CPRV:20 CPFM:03 SCEP:02 BDID:00 ECID:000003A46115C30C IBFL:03 SRNM:[611129GYA4S]" bNumConfigurations: 0x01 ConnectionStatus: DeviceConnected Current Config Value: 0x01 Device Bus Speed: High Device Address: 0x01 Open Pipes: 1 Endpoint Descriptor: bEndpointAddress: 0x04 OUT Transfer Type: Bulk wMaxPacketSize: 0x0200 (512) bInterval: 0x00 Configuration Descriptor: wTotalLength: 0x0039 bNumInterfaces: 0x02 bConfigurationValue: 0x01 iConfiguration: 0x05 0x0409: "Apple Mobile Device (Recovery Mode)" bmAttributes: 0x80 (Bus Powered ) MaxPower: 0xFA (500 Ma) Interface Descriptor: bInterfaceNumber: 0x00 bAlternateSetting: 0x00 bNumEndpoints: 0x01 bInterfaceClass: 0xFE bInterfaceSubClass: 0x01 bInterfaceProtocol: 0x02 iInterface: 0x00 Endpoint Descriptor: bEndpointAddress: 0x04 OUT Transfer Type: Bulk wMaxPacketSize: 0x0200 (512) bInterval: 0x00 Interface Descriptor: bInterfaceNumber: 0x01 bAlternateSetting: 0x00 bNumEndpoints: 0x00 bInterfaceClass: 0xFF bInterfaceSubClass: 0xFF bInterfaceProtocol: 0x51 iInterface: 0x00 Interface Descriptor: bInterfaceNumber: 0x01 bAlternateSetting: 0x01 bNumEndpoints: 0x02 bInterfaceClass: 0xFF bInterfaceSubClass: 0xFF bInterfaceProtocol: 0x51 iInterface: 0x06 0x0409: "Apple USB Serial Interface" Endpoint Descriptor: bEndpointAddress: 0x81 IN Transfer Type: Bulk wMaxPacketSize: 0x0200 (512) bInterval: 0x00 Endpoint Descriptor: bEndpointAddress: 0x02 OUT Transfer Type: Bulk wMaxPacketSize: 0x0200 (512) bInterval: 0x00

Reply · Like

James Evans Turner - February 28, 2013 at 6:55pm

You find it in Windows without iTunes and without USB View. -Connect the iDevice in Restore mode --Turn the device off --Hold the Home button while connecting the USB cable --Keep holding the home button until a "Connect to iTunes" picture appears. - In Windows, open the Device Manager - Change the view to "Devices by connection" - The iDevice will appear as a USB composite device, containing two unrecognized devices (unrecognized if the system doesn't have iTunes because the driver software will not be installed) - Double-click the USB composite device and go to the "Details" tab. - You will see many text strings containing cryptic device IDs and other information. - Look for the one containing "ECID" and 16-charcter number after that is the ECID.

Reply · Like

Xvani - July 15, 2010 at 3:30pm

is an error message I get on two different systems (win 7 and win xp. Neither have iTunes installed) Ideas?

Reply · Like

ihernandezico - May 1, 2010 at 4:41pm

I have a 3GS and my SHSH ALREADY BEEN KEPT BY SAURIK. DO I HAVE TO DO THE ECID AND RUN UMBRELLA FIRMAWARE?

Reply · Like

Recent. Read the latest Apple News.

RECENT

Apple Developing Advanced 'LLM Siri' to Rival ChatGPT [Report]

CFPB to Supervise Apple Pay and Other Digital Payment Apps

Apple Releases macOS Sequoia 15.2 Beta 4 With Expanded Apple Intelligence Features [Download]