De IPSW file download je best met firefox omdat Safari die automatisch extract
Stap 2 dubbel klik om PwnageTool 3.1.3 te mounten, sleep dan het PwnageTool icoon in de Pwnage folder/map.
In de Pwnage folder dubbel klikken om de PwnageTool applicatie te starten.
Klik ok als er een waarschuwing komt
stap 3 klik op de top menu bar om de Expert Mode te selecteren
Stap 4 Klik om je iphone te slecteren. Er zal een vinkje verschijnen over de iphone afbeelding.
Step vijf Om verder te gaan, klik op de blauwe pijl. Je wordt naar de "Browse for IPSW" pagina geleid. Op mijn laptop vond ik automatisch de IPSW. Indien dit niet het geval is kan je op Browse for IPSW... klikken.
Klik om de gevonden IPSW file te slecteren, er verschijnt een vinkje naast. Klik dan op de blauwe pijl.
Stap zes Je ziet een menu met 7 keuzes. klik om General te slecteren, dan klik je op de blauwe pijl.
De General settings staan toe om de partitie grootte te wijzigen. vink Activate the phone aan als je geen officiele carrier hebt. klik dan op de blauwe pijl.
NOTE*: Deselecteer Activate als je een legale carrier hebt. NOTE*: Je zal de partitieruimte misschien wat moeten vergroten. Bij mijn eerste poging mislukte om de IPSW te maken tot ik 695 MB ingaf als partitieruimte.
De Bootneuter settings zijjn grijsvoor de 3G iPhone. Klik op de blauwe pijl.
Het Cydia settings menu staat u toe om custom pakckages te creëren zodat je dat later niet manueel moet doen.
Klik om de Download packages tab te slecteren. Klik dan op de Refresh buttonom alle mogelijke packages te tonen. dubbel klik het package dat je wil downloaden en het te tonen in de Select Packages tab.
vink diegene aan die je wil en klik dan op de blauwe pijl.
Het Custom Packages Settings menu toont de gelijste package settings voor de custom IPSW. Laat deze instellingen voor wat ze zijn. Klik op de blauwe pijl om verder te gaan.
Het Custom Logos Settings menu laat u toe om je eigen foto's als bootlogo te gebruiken. Klik op de Browse knop om het bootlogo en recovery logo te slecteren. Als je die van iclarified wil gebruiken, kan je ze hier vinden: Boot Logo, Recovery Logo
Onthou, de regels voor de logo's zijn: RGB or Grayscale formaat met Alpha channel en de dimenties onder 320x480...
klik op de blauwe pijl om verder te gaan
Stap zeven Het pwnage proces kan beginnen! Klik op de Build knop om het te slecterenen klik dan op de Blue arrow knop om te beginnen.
Stap acht Je zal worden gevraagd om je custom .ipsw file te saven. Save het in je Pwnage folder.
Je IPSW wordt nu gemaakt. Kan 10 minuten duren.
Je zal gevraagd worden om een administrator paswoord in te geven. Doe dat en klik dan de OK knop.
Je zal gevraagd worden om de PwnageTool applicatie te sluiten, en dan je iphone in recovery mode te laten gaan. Klik de OK knop.
Stap negen Maak dat je iphone met je computer verbonden is en volg dan deze instructies om je iphone in recovery mode te laten gaan.
Als je dit correct hebt gedaan dan verschijnt er een itunes logo en een usb kabel. iTunes zal ook zeggen dat het een iphone gevonden heeft in recovery mode.
Stap tien In iTunes, hou de Alt/Option in en klik Restore.
Stap elf Navigeer naar de Pwnage folder in het dialoog venster dat verschijnt. Selecteer de custom IPSW dat werd gemaakt (iPhone2,1_3.1_7C144_Custom_Restore.ipsw) en klik op de Open button.
Stap twaalf iTunes gaat nu je firmware restoren. Dit kan ook 10 minuten duren. Eens dat gedaan is heb je een gejailbreekte iphone met 3.1 firmware !!!
***Dank: Dank aan het Dev-Team voor het harde werk om deze jailbreak en tutorial mogelijk te maken!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
I just have the same problem as the other people.
iTunes says: An unknown Error occurred (1604) ...
when trying to install 3.1.3.
Also My phone won't get in recovery mode.
Please answer asap.
Thanks so much for your help.
mine too... tried few times, still facing the same problem when tried to retore with the firmware.. error msg (1604)
fyi:
iphone 3gs - 3.1.3(7E18) - 05.12.01
is there any1 can help on this?? plsss..
Dear All,
I know that every single days you might be recieving buches of e-mails, but I will really appreciate if you can dedicate just few minutes and answer me about a very serios concern i have and it may be the same concern of others Iphone users that first (1) do not live in USA and as consequences can not open and USA itunes and secondly (2) tells you that the iphone obviously is locked.
I have a 3GS iphone with firmware 3.1.3 and baseband 05.12.01, i live in the Netherlands Antilles and my account with Itues obviously is not an USA account as i am not resident of USA.
I followed couple of times your instructions with Pwnage tool 3.1.5 (Mac) step by step and everything seems to be fine except when i reach the point that the Pwnage tool 3.1.5 after being created the custom firmware and ask me for a password and introduce the password now ask me also about if my Iphone has been pwnage and I answer (no), them the applicate should at that point to put the Iphone in recovery mode. the couple of times i have been running the applicate step by step the Pwnage does not put my Iphone in recovery mode and it is just freezing, no only that, i would like to know why when i created the custom firmware and try to restore through Itunes, Itunes is always giving an error message? do you may think that this is because Itunes after introduce the new policy that can be able to monitory from where are you log in to they can block any update or anything you would like to do in regards with their software?
I just trying to get the logistic of this situation as i notice a lot of people in the block saying that its work, but why no with me?
do you by any chance know about others that they may be getting the same situation i do?
There is some extra or additional solution you can suggest me in order to active my iphone? i have it that way since almost four month and now that there is IS04 out there i would like to have my iphone working fine.
I will really appreaciate your respond in this regards.
Regards
I have an Iphone 3GS (3.1.3/05.12.1) and i have been trying like a crazy (step by step) to do as exactly you say in your tutorial to do to jailbraek this iphone; everything goes well till i try to install the custom firmware Pwgnage did, but the Itunes always give me an error message that i can not install this firmware; I really need your help (please); I need that in despite i know you all receive a bunch of e-mails that you please kindly help me and send me an e-mail stating why of this error or if there is something else i most do in order to jailbreak my iphone....
Your prompt respond to this inquiry will be highly appreciated.
Regards
This latest version of PwnageTool can jailbreak the original iPhone (Edge/2G), iPhone 3G, iPhone 3GS(older bootrom only with baseband 04.26.08) and iPod touch running on iPhone firmware 3.1.3. The custom .ipsw firmware files created with PwnageTool can update iPhone to firmware 3.1.3 without updating its baseband so that it can be unlocked to run on any carrier SIM. Please do not use this with New Bootrom on 3.1.3, it will screw your iphone. iClarified shoutd give this warning in the begining of the tutorial.
Yes. If you sync'd your iPhone w/ iTunes and then jailbreak; the next time you run iTunes and cnceont the iPhone, iTunes will recognize a new phone as ask you if you want to restore from a prior-backed up version. Select that iTunes will then restore. After finished, check your sync settings (email, bookmarks, music, apps, videos, etc) and sync again. iTunes puts everything back like normal. Cydia installed apps are not backed up/restored. Use AptBackup from the Cydia repository prior to jb'ing and last iTunes backup. Then after the iTunes restore, open Cydia, download AptBackup, and press restore. Now all your jb'd apps are loaded. Just performed this procedure twice in the last 3 days .. great success. The only thing missing is the exact placement of app icons on the SB . and passwords for email accounts are missing (probably a good thing).
Hello! I has 3gs version 3.1.2 ,model firmware 05.11.07. I just upgrade version 3.1.3 using Pwnage Tool .After run version 3.1.3 the phone is stock in recovery model ( power on or logo on the screen ) when i used USB connect to iTune see the phone on recovery model .Please help ?Thank you !
Hi there. Please if i write something wrong please reply/comment!!!
This tutorial is just for 3GS with 3.1.3 baseband equal or inferior xx.11.xx
WILL NOT WORK IF YOU HAVE baseband 5.12.xx.
- only for MAC OS;
- For WINDOWS there is a "spirit" Jailbreak (google "3.1.3 spirit") and it will work on all baseband even xx.12.xx but your phone MUST NOT be locked in "Emergency Call".
For those who have the same as me:
3GS 32GB
3.1.3
Baseband: 05.12.01
Serial: xxx30 <= old serial but the bootloader is the newest
BootLoader: 6.4 <= new bootloader
Model MC134
But locked in Emergency Call you have to wait!
If not locked in Emergency Call USE ONLY the Spirit.
For UNLOCK still have to wait 21st June for the release of OS4.0 and maybe then DevTeam release the so waited unlock!
To check your iPhone info use f0recast.exe
Hope this isuseful and with the correct information.
This is only for mac. For Windows (i think there is not nothing).
To your baseband it will NOT WORK.
we are in the same "boat" and we have to wait a few more days. Maybe 21st June.
Help....!!!!
Stuck on step nine. just stays there, saying "connect device to USB" but doesnt go anywhere. For 1hrs.... How longs is going to take more!? Help....!!!!
I think you are on the latest firmware 3.1.3 and baseband XX.12.XX, if yes this is not for your device. Use Spirit to jailbreak your device but to use Spirit you must not have your phone stuck at connect to iTunes or emergency scree.
guyzz whn will be the new version of redsnow will be released am having a 3gs 3.1.3 with latest bootloader in emergrncy mode. pls give me a reply thnxx for ur response
Hey guys, does this tutorial work with an iphone 3GS with new bootrom ( my model number starts with MC). I jailbroke it before on 3.1.2, but i accidentaly updated to 3.1.3. Does this tutorial work? thanks much appreciated.. :)
hi, I have 3Gs iPhone with 3.1.3 firmware, but dont have Mac, I use windows, so is there a way (tool) that I can use to jailbreak it?
thank you for your help in advance.
stuck on step nine. just stays there, saying "connect device to USB" but doesnt go anywhere.
background info: iphone crashed, already jailbroken. had to restore to factory settings which installed 3.1.3. now cant downgrade or jailbreak...
thanks
ONLY work if you have 3GS with the following:
-Older bootrom (week 40, 41 or lower)
-On firmware 3.1.2 (baseband 05.11.xx) or lower
If you have it on 3.1.3 (baseband 05.12.xx) already. DO NOT TRY!!!
Or if you have a newer bootrom. DO NOT TRY!!!
this works very good for me, I have older base band 4.26 with os 3.1.2, did it without any problem, I guess this doesn't work for newer base band even 5.11