Kako da nadogradite Va iPhone 4 bez nadogradnje modema na 4.2.1 (Windows)

POST

MAIL

Posted April 3, 2011 at 12:48pm by iClarified

Ovo uputstvo će Vam pokazati kako da nadogradite Vaš iPhone 4 u iOS 4.2.1 bez nadogradnje modema (BaseBand) pomoću programa TinyUmbrella iz Windows-a.

Obratite pažnju: Ovo radi SAMO sa iPhone 4!

Prvi korak
Skinite TinyUmbrella odavde. Takođe skinite iPhone 4 iOS 4.2.1 koji možete naći ovde.

Kako da nadogradite Vaš iPhone 4 bez nadogradnje modema na 4.2.1 (Windows)

Drugi korak
Dupli klik na TinyUmbrella.exe

Ako dobijete Windows Firewall obaveštenje, [tiklirajte oba boksa i kliknite Allow Access.

Treći korak
Uverite se da je Vaš uređaj spojen na računar i da je Umbrella prepoznala tip uređaja i verziju softvera u njemu.

**Ako već niste sačuvali Vaš iOS 4.2.1 SHSH fajl onda kliknite Save SHSH. Pre nego što nastavite uverite se da je fajl sačuvan.

Četvrti korak
Kliknite Start TSS Server i uverite se da nema grešaka.

Jednom kada se TSS Server "pokrene" uspešno, Umbrella će zatvoriti iTunes. Ostavite program TinyUmbrella otvorenim. Da li je TSS server pokrenut i da li radi uspešno možete proveriti na Log kartonu.

Ako dobijete bilo koju grešku NEMOJTE NASTAVLJATI DALJE! Dalja nadogradnja Vam neće raditi ukoliko TSS server nije pokrenut.

Peti korak
Otvorite iTunes.

Držite stisnutim Shift taster i kliknite Restore

Izaberite Vaš iPhone 4.2.1 softver i kliknite Open.

Kliknite Restore da počnete sa nadogradnjom Vašeg uređaja.

Šesti korak
iTunes bi trebalo da Vam pokaže grešku 1013. To je ono što želimo (što treba da se desi), i to je obaveštenje da modem nije nadograđen :) Kliknite na Ok i zatvorite iTunes.

Ako dobijete 16XX grešku onda probajte da uređaj ubacite u DFU mod i idite na Peti korak.
Ako se Vaša nadogradnja NIJE završila greškom 1013 znači da je i Vaš modem nadograđen. Ovo je verovatno zbog toga što Vam TSS server nije radio ILI ste nadograđivali bez TinyUmbrella ILI radite sa uređajem koji nije iPhone 4.

Sedmi korak
Ubacite Vaš iPhone u DFU mod tako što ćete držati oba tastera Power i Home deset sekundi, zatim pustite Power taster a nastavite držati Home taster još 5 sekundi. Pomoć za DFU mod možete naći ovde.

Osmi korak
Sada ste spremni da pratite naš Greenpois0n tutorial koji će jailbreak-ovati Vaš uređaj i vratiti ga iz DFU moda. **Napomena: Ne morate ubacivati Vaš uređaj u DFU mod posle klika na Jailbreak dugme u Greenpois0n jer smo to već uradili :)

Deveti korak
Vaš iPhone će sada biti verzije 4.2.1 sa 1.59.00 modemom! (Što znači da ga možete otključati prateći ovo uputstvo)

**Hvala @semaphore za njegov rad na ovom alatu.

Follow iClarified

smile - November 13, 2012 at 3:15am

how with bb 02.10.04

Reply · Like

JC - October 14, 2011 at 6:20pm

Hi. I would like to know if this procedure works to upgrade an iphone 4 from IOS 4.3.5 to IOS 5??? Thanks... JC

433JB - July 8, 2011 at 2:32pm

Hi, I have upgraded to 4.3.3 using this tutorial, everything worked as given. However, after using FixRecovery43.exe, I am not able to get out of emergency screen. Can any one tell me how to get out of emergency screen? Thanks,

JF Gauthier - June 3, 2011 at 11:20am

Does this also apply to update to 4.3.3, I can see in tinyumbrella that my SHSH is saved for 4.3.3, my guess would be to say it is safe to do so. But I may be wrong.

youngplay - May 20, 2011 at 1:44am

I can confirm that this works also on 4.3.3

Khoi Ky Pham - May 22, 2011 at 11:49am

how did u get it to work with 4.3.1? Can you give us step by step what you did and where you get the files? Thanks

as_usual150 - May 9, 2011 at 1:29am

Is this method work for all future ios versions????

mikaljan - May 4, 2011 at 1:30pm

I can confirm that this works with ios 4.3.2 also, make sure you are running tiny umbrella in the back ground and have TSS server running!! The steps for upgrading to 4.3.2 without upgrading the baseband is the same as 4.3.1.

rolly - May 3, 2011 at 9:32am

Worked for me after trying loads of other sugestons...thanks!!

iPhoneDonate - April 28, 2011 at 2:15pm

http://www.iphonedonate.com The campaign to give money: who unlocked the iPhone 4 by software??

Trickdaddy - April 22, 2011 at 1:19pm

it seem like 4.3.2 is out but I like to keep my baseband so I am updating it to 4.3.1, the problem is that I am getting 16XX error which then I went back to step 5 but it like a loop getting the same 16xx error. I have TSS server running, and I try using Tinyumbrella 4.3 and 4.32 same problem. I also have try ignoring the error 16xx and ran the fix Recovery but I end up at the restore screen in Itune. I got this working before on another iphone. Anybody know what I am doing wrong?

RBrasil - May 24, 2011 at 5:37pm

I get the same loop. Let me know if you got an answer for this problem yet.

mrhernandez - June 2, 2011 at 8:11pm

im having this same issue, were you able to fix it ?

drgsrao - April 21, 2011 at 12:00am

I tried to update my Iphone 4 from 4.2.1 to 4.3.2 using the TU latest version.theTSserver is not running evenif you start with administrator.Please let me know How to do this.I am desparate as my phone is not resored completely and I do not have home page apple logo with Itunes is showing up Please let me know how to resore at this point to 432 without resoring BB thank you

dimpet - April 11, 2011 at 10:41pm

followed the instructions here, and successfully updated my iphone 4 to 4.3.1without the change to baseband 01.59.00. But how do I jailbreak next? I don't have Mac, but running redsnow will update the baseband again as far as I understand. Without JB, I can't run ultrasnow. HOW TO JAILBREAK?

blue2005 - April 11, 2011 at 3:23pm

I upgraded iPhone4 4.0.1 to 4.3.1 (preserving BB 1.59.00) using TinyUmbrella 4.30.05 + FixRecovery43. It worked without probelms....only now my phone i stuck in "Emergency Call" mode......HELP!!! What ca I do?

Dp - April 12, 2011 at 1:16am

Download snowbreeze and create a custom ISPw with Cydia and unlock screen

ywu1012 - April 10, 2011 at 8:44pm

I followed the instructions here, and successfully updated my iphone 4 to 4.3.1without the change to baseband 01.59.00. But how do I jailbreak next? I don't have Mac, but running redsnow will update the baseband again as far as I understand. Without JB, I can't run ultrasnow. Please help!

thyago231 - April 10, 2011 at 8:48pm

No! Redsn0w will not update ur baseband!!!! Go ahead and Jailbreak and install Ultrasn0w, it fixed the bars not showing right...

ywu1012 - April 10, 2011 at 9:46pm

Good! But do you have to run Tiny Umbrella again while Jailbreaking with Redsn0w? Thanks!

thebrij - April 9, 2011 at 1:22am

hey i hav actualy updated ma phone bymistake and it ll so me the baseband 3.10 and 4.2.1 os so is it possible to preserve it back to 1.59 pls help me fast ...>!!!

mo3tasem - April 7, 2011 at 4:51pm

i need way to unlock iphone after update without official sim

thyago231 - April 5, 2011 at 10:59am

It Worked updating from 4.1 to 4.3.1 but only one bar showing... but voice/data seem to be fine... does anyone know how to fix the bar issue?

hebs - April 5, 2011 at 4:10pm

Ive just found this.... trying now. it was Tiny Umbrella stopping the Apple 4.3.1 update getting signed and seemed to stop the Baseband being updated. To fix the problem go into TinyUmbrella and in the Advanced preferences, unchecked "set hosts to Cydia on exit" and then restored by iPhone. Restore didn't force me into recovery and now I have full bars.

ashdas - June 3, 2011 at 6:43pm

what was the BB after the update ?

beks6 - April 4, 2011 at 7:54am

the same problem, just one bar after update 2G/3G doesnt matter. but calling is working

Help - April 4, 2011 at 3:03am

I also have 1 bars after this tutorial... Please Help

Saumil Bhavsar - April 27, 2011 at 5:48am

Use Ultrasn0w fixer from Cydia

Fancyvpp - April 3, 2011 at 10:29pm

i updated using restore option but i am not getting any signal bars. i did a google search and other people are having same problems. i restored back to 4.2.1.

More Comments