Como desbloquear o Iphone 3GS Usando o PurpleSn0w

POST

MAIL

Posted July 14, 2009 at 1:06am by iClarified

Estas são instruções em como desbloquear o Iphone 3GS para usar com qualquer operadora GSM usando o PurpleSn0w. Geohot publicou stating que o desbloqueo com o Purplesn0w vai melhorar problemas com o wifi, bateria e com o proprio desbloqueo. Se preferir usar o iPhone Dev-Teams UltraSn0w para desbloqueo pode encontar as instruções aqui here

Antes de seguir estas instruções o seu Iphone tem que estar Jailbroken e estar com a baseband 04.26.08 (firmware do modem ). Isto quer dizer que tem de estar a corre o firmware 3.0 e que já usou o PwnageTool, RedSn0w ou o PurpleRa1n para fazer o jailbreak. VOCÊ TAMBÉM TEM QUE(POR ENQUANTO) TER O SEU IPHONE ACTIVADO COM A OPERADORA OFICIAL DA APPLE. AINDA NÃO HÁ SUPORTE DE ACTIVAÇÃO.

Para encontrar o seu firmware e a sua versão de firmware de modem(baseband) siga o seguinte this tutorial. Se o seu iphone não estiver a correr a versão de baseband 04.26.08 então precisa the seguir um dos seguintes tutoriais antes de fazer o esbloqueo: Mac, Windows

Se o seu iphone for da rede T-Mobile ou de outra operadora sem serviço 3G desligue a função 3G antes de inciar...

Passo um
Pressione para iniciar Cydia Installer a partir da SpringBoard.

Como desbloquear o Iphone 3GS Usando o PurpleSn0w

Passo dois
Pressione o icon Manage na parte de baixo do ecran.

Passo três
Pressione o icon Sources

Passo quatro
Pressione o icon Edit no topo direito do ecran.

Passo cinco
Pressione o icon Add no topo esquerdo do ecran.

Passo seis
Introduza http://apt.geohot.com/ como fonte url e pressione o icon Add Source.

Passo sete
Assim que a fonte tenha sido adicionada pressione o icon Return to Cydia.

Passo oito
Pressione o icon Done no topo direito do ecran.

Passo nove
Pressione apt.geohot.com da lista de fontes adicionadas pelo utilizador.

Passo dez
Pressione com.geohot.purplesn0w da lista packages

Passo onze
Pressione Install no topo direito do ecran.

Passo doze
Pressione Confirm no topo direito do ecran.

Passo treze
Após a instalação correr com sucesso pressione o icon Return to Cydia.

Passo catorze
Agora pressione o botão Home desligue o seu Iphone e ligue-o novamente em seguida. Você faz isto pressionando o botão de power por três segundos e em seguida mover o slider para a direita. Pressione o botão de power novamente para ligar o Iphone.
.

Agora você já deve conseguir ultilizar o cartão SIM da sua operadora de preferência

Follow iClarified

ankit - June 8, 2011 at 5:28am

Hi I bought new iphone 3gs and unlock it in india. software version is 4.3.1. i am trying t o use it for vodafone. but i am receiving no signal after a long time searching. please help

Reply · Like

macfreak2326 - October 23, 2009 at 1:10pm

oops sorry i didn't notice that it was for the 3gs only i'm sorry again and i need to ask another question does anyone know how to downgrade an iphone 3g from 3.1 firmware to 3.0

macfreak2326 - October 23, 2009 at 1:07pm

hi i'm new in unlocking/jailbraking iphones and i happen to own an iphone 3g and i was wondering should i take out the sim while installing purplesn0w

turbulence - October 22, 2009 at 10:42am

Hello Dev team, Its been so quiet lately, I have been checking on this website many time each day, hopefully that the Pwanege tool would com out, so that I can full fill my duty, j/b and unlock my 3GS that have original firmware 3.1.2. But it seems thatt my hope is fading away. I might just put that damn phone on Greglist, get a Nokia, and No more apple product.

ses dinleme cihazları - October 19, 2009 at 7:42pm

You have to download itune to unlock sim but i do not know the rest of it:)

David - October 16, 2009 at 10:01pm

I follow your instructions on unlocking the 3Gs, but in the left corner were the carrier letters ex:(ATT) go it only has very little lines which you can barely see. I put a working ATT sim card that I use it and the phone worked fine and but now is not working after unlocking it. Can you someone help? Thanks!!!

Rockey - October 26, 2009 at 11:13pm

I'm having the same problem with my 3GS (3.1 factory firmware). It's jailbroken and everything. but can't detect T-Mobile. ANY HELP ANYBODY?

Kisan - October 10, 2009 at 11:23am

How can i unlock if my Bootloader is 5.9 which is holding me back from being able to downgrade my Modem Firmware !!!

NYEREL - September 26, 2009 at 4:50pm

www.nyerel.net PARÇA KONTOR YÜKLEME MERKEZİ

mayank - September 18, 2009 at 2:08am

Hi could anyone tellme what would happen if i havent activated my phone with att yet but have the att sim inside when im trying to unlock it, i already jailbroke it.

karizma54 - September 13, 2009 at 8:12am

sallama lan öyle bişey yok

jailbrak - September 13, 2009 at 8:11am

thankyou man you crafled good you sites ..

masterguy - August 31, 2009 at 9:57pm

At step 13, it tells me that "no data....could activate", basically that the iphone lost the ATT signal. Is this normal? Did my unlock still work? thx,

Yo - August 29, 2009 at 3:43am

I went all the way through (donwngraded to 3.0) jailbroke it and installed with cydia. When I put another sim it still does not recognize it. I mean, I have the full menu but i tunes says I have thr wrong sim and I can´t get a signal... any way to fix this? Thanks.

Daelmyth - August 24, 2009 at 4:29pm

geohot=geoNOT - DEV TEAM!!! WTG - Ultrasn0w=working 3gs on T-mobile network redsn0w 0.8 jailbreak, ultrasn0w unlock

iYass - August 11, 2009 at 1:43pm

Purple Sn0w work with an iPhone 3GS firmware 3.0.1 ? The 3.0.1 has the same baseband with the 3.0 :)

chencheno - August 8, 2009 at 8:17am

My one is 3G,i cant unlock my sim aft i upgrade to 3.0,then wifi also cant use too..how should i do...thank...

Zeljko - July 30, 2009 at 4:52am

dont work at all. to all readers USE ULTRASNOW.... and it will work just fine.

Zeljko - July 30, 2009 at 2:43am

Phone 3 gs jailbreak with redsn0w and then this tutorial = EVERYTHING WORK FINE ,CYDIA IS MORE STABIL. BIG THANK TO DEV TEAM !!!!

ridhwan - July 21, 2009 at 6:20pm

hi everyone, Got my new iphone 3GS (no contract )from states, as i have said i stay in saudi arabia. I have jailbreaken the phone using the redsn0w and tried to install ultrasn0w but cydia keep giving me this error message of size mismatch. after umpteen number of tries installed purplesn0w for unlocking the iphone and it got installed. But the problem is that i have inserted my sawa (stc) sim in the iphone but the network is not there, is there something i have missed or overlooked, any suggestions or comments are welcome. Appreciate your efforts in advance., Thanks for looking at it. p.s. forgot to mention that before jailbreaking i have added some songs from itunes on it, later while jailbreaking kept the at&t sim, not much sure about which sim should be present whether the one i want to use or the at&t one. it looks in the cydia that purplesn0w has been installed but i am unable to get the network signal. Regards Ridhwan

Roberto007 - July 23, 2009 at 5:16pm

Why don't you try jailbraking using redsnow and ultrasnow. in mine (3gs att) worked perfectly. I heard that purplesnow doesnt work so I didnt try it.

Krasi - July 17, 2009 at 5:59am

Geohot, if you are reading this, could you reply to the below problems please and why peope experience them? It sounds to me that your "thing" doesn't work at all?

More Comments