Como Desbloquear el iPhone 3GS usando PurpleSn0w

POST

MAIL

Posted July 14, 2009 at 1:06am by iClarified

Estas son las Instrucciones de como Desbloquear el IPhone 3GS para usar con cualquier carrier de telefono GSM usando PurpleSn0w. Geohot a publicado Declarando que el purplesn0w unlock debe mejorar los problemas con wifi, bateria, y el desbloqueo. Si tu prefieres usar the iPhone Dev-Teams UltraSn0w unlock tu puedes buscar estas instrucciones aqui

Antes de poder seguir estas instrucciones tu tienes que tener un iPhone con el Jailbreak echo y con la version del modem a 04.26.08 (modem firmware). Esto quiere decir que el firmware del telefono tiene q estar en 3.0 y tu puedes hacer eso usando PwnageTool, RedSn0w, o PurpleRa1n para hacer un jailbreak.

Para buscar su firmware y modem firmware(baseband) tu puedes seguir este tutorial. Si tu no tienes el baseband version 04.26.08 entonces tu necesitas seguir uno de estos tutoriales antes de desbloquear: Mac, Windows

Si tu estas en T-Mobile o cualquier compañia sin 3G recuerde apagarlo antes de empezar..

Paso Uno
Ejecute el programa Cydia desde su menu.

Como Desbloquear el iPhone 3GS usando PurpleSn0w

Paso Dos
Seleccione la opcion Manage(Tiene un dibujo como un libro abierto).

Paso Tres
Presiona la opcion Sources.

Paso Cuatro
Presiona el boton Edit que esta debajo del icono de la bateria.

Paso Cinco
Presiona el boton agregar Add que esta en la izquierda de arriba.

Paso Seis
Digita http://apt.geohot.com/ y dale al boton Add Source.

Paso Siete
Espera que haga algunas cosas y luego dale al boton Return to Cydia[/].

Paso Ocho
Presiona el boton Done que esta debajo del icono de la bateria.

Paso Nueve
Selecciona apt.geohot.com de la lista.

Paso Diez
Selecciona com.geohot.purplesn0w de la lista.

Paso Once
Selecciona el boton Install que esta ubicado debajo del icono de la bateria.

Paso Doce
Selecciona el boton Confirm que esta ubicado debajo del icono de la bateria.

Paso Trece
Despues que complete la instalacion presiona el boton Return to Cydia.

Paso Catorce
Ahora presiona el boton Home luego apaga el telefono y luego enciende el telefono.

Luego Ingresale tu Sim Card y espera 5 segundos para que veas la red.

Follow iClarified

ankit - June 8, 2011 at 5:28am

Hi I bought new iphone 3gs and unlock it in india. software version is 4.3.1. i am trying t o use it for vodafone. but i am receiving no signal after a long time searching. please help

Reply · Like

macfreak2326 - October 23, 2009 at 1:10pm

oops sorry i didn't notice that it was for the 3gs only i'm sorry again and i need to ask another question does anyone know how to downgrade an iphone 3g from 3.1 firmware to 3.0

macfreak2326 - October 23, 2009 at 1:07pm

hi i'm new in unlocking/jailbraking iphones and i happen to own an iphone 3g and i was wondering should i take out the sim while installing purplesn0w

turbulence - October 22, 2009 at 10:42am

Hello Dev team, Its been so quiet lately, I have been checking on this website many time each day, hopefully that the Pwanege tool would com out, so that I can full fill my duty, j/b and unlock my 3GS that have original firmware 3.1.2. But it seems thatt my hope is fading away. I might just put that damn phone on Greglist, get a Nokia, and No more apple product.

ses dinleme cihazları - October 19, 2009 at 7:42pm

You have to download itune to unlock sim but i do not know the rest of it:)

David - October 16, 2009 at 10:01pm

I follow your instructions on unlocking the 3Gs, but in the left corner were the carrier letters ex:(ATT) go it only has very little lines which you can barely see. I put a working ATT sim card that I use it and the phone worked fine and but now is not working after unlocking it. Can you someone help? Thanks!!!

Rockey - October 26, 2009 at 11:13pm

I'm having the same problem with my 3GS (3.1 factory firmware). It's jailbroken and everything. but can't detect T-Mobile. ANY HELP ANYBODY?

Kisan - October 10, 2009 at 11:23am

How can i unlock if my Bootloader is 5.9 which is holding me back from being able to downgrade my Modem Firmware !!!

NYEREL - September 26, 2009 at 4:50pm

www.nyerel.net PARÇA KONTOR YÜKLEME MERKEZİ

mayank - September 18, 2009 at 2:08am

Hi could anyone tellme what would happen if i havent activated my phone with att yet but have the att sim inside when im trying to unlock it, i already jailbroke it.

karizma54 - September 13, 2009 at 8:12am

sallama lan öyle bişey yok

jailbrak - September 13, 2009 at 8:11am

thankyou man you crafled good you sites ..

masterguy - August 31, 2009 at 9:57pm

At step 13, it tells me that "no data....could activate", basically that the iphone lost the ATT signal. Is this normal? Did my unlock still work? thx,

Yo - August 29, 2009 at 3:43am

I went all the way through (donwngraded to 3.0) jailbroke it and installed with cydia. When I put another sim it still does not recognize it. I mean, I have the full menu but i tunes says I have thr wrong sim and I can´t get a signal... any way to fix this? Thanks.

Daelmyth - August 24, 2009 at 4:29pm

geohot=geoNOT - DEV TEAM!!! WTG - Ultrasn0w=working 3gs on T-mobile network redsn0w 0.8 jailbreak, ultrasn0w unlock

iYass - August 11, 2009 at 1:43pm

Purple Sn0w work with an iPhone 3GS firmware 3.0.1 ? The 3.0.1 has the same baseband with the 3.0 :)

chencheno - August 8, 2009 at 8:17am

My one is 3G,i cant unlock my sim aft i upgrade to 3.0,then wifi also cant use too..how should i do...thank...

Zeljko - July 30, 2009 at 4:52am

dont work at all. to all readers USE ULTRASNOW.... and it will work just fine.

Zeljko - July 30, 2009 at 2:43am

Phone 3 gs jailbreak with redsn0w and then this tutorial = EVERYTHING WORK FINE ,CYDIA IS MORE STABIL. BIG THANK TO DEV TEAM !!!!

ridhwan - July 21, 2009 at 6:20pm

hi everyone, Got my new iphone 3GS (no contract )from states, as i have said i stay in saudi arabia. I have jailbreaken the phone using the redsn0w and tried to install ultrasn0w but cydia keep giving me this error message of size mismatch. after umpteen number of tries installed purplesn0w for unlocking the iphone and it got installed. But the problem is that i have inserted my sawa (stc) sim in the iphone but the network is not there, is there something i have missed or overlooked, any suggestions or comments are welcome. Appreciate your efforts in advance., Thanks for looking at it. p.s. forgot to mention that before jailbreaking i have added some songs from itunes on it, later while jailbreaking kept the at&t sim, not much sure about which sim should be present whether the one i want to use or the at&t one. it looks in the cydia that purplesn0w has been installed but i am unable to get the network signal. Regards Ridhwan

Roberto007 - July 23, 2009 at 5:16pm

Why don't you try jailbraking using redsnow and ultrasnow. in mine (3gs att) worked perfectly. I heard that purplesnow doesnt work so I didnt try it.

Krasi - July 17, 2009 at 5:59am

Geohot, if you are reading this, could you reply to the below problems please and why peope experience them? It sounds to me that your "thing" doesn't work at all?

More Comments