Como desbloquear/Jailbreak seu iPhone 2G para o OS 3.0 usando RedSn0w (Windows)

POST

MAIL

Posted June 20, 2009 at 7:22am by iClarified

Estas são instruções sobre como desbloquear e fazer o jailbreak em seu iPhone 2G para o firmware 3.0 usando o RedSn0w para Windows. Antes de começar, certifique-se de ter atualizado o iTunes para a versão 8.2.

Você pode encontrar uma versão para o Mac neste tutorial here

** Se você deseja fazer o jailbreak do firmware 3.0.1 você pode seguir exatamente estas instruções; porém, no Passo Dois use este arquivo do firmware 3.0.1 do iPhone ao invés do 3.0. Continue com as instruções conforme indicado.**

Passo 1
Crie uma pasta chamada Pwnage em seu desktop.

Faça o download dos seguintes arquivos e coloque-os na pasta Pwnage que você acabou de criar :
- RedSn0w
- BL 3.9
- BL 4.6
- 3.0.0 (2G): iPhone1,1_3.0_7A341_Restore.ipsw

Extraia o arquivo zip RedSn0w para a pasta Pwnage.

Como desbloquear/Jailbreak seu iPhone 2G para o OS 3.0 usando RedSn0w (Windows)

Passo 2
Conecte seu iPhone ao computador e inicie o iTunes.

Selecionar o seu iPhone da lista de dispositivos a esquerda. Agora segure a tecla shift e clique no botao Restaurar. Restaurar é aconselhado, pois nao criará nenhuma perda de espaço no seu iPhone..

Va até a pasta Pwnage em seu desktop e selecione o firmware ipsw.Clique no botao Abrir para continuar.

Passo 3
Uma vez que o iTunes tenha terminado de fazer o upgrade do firmware desejado, você deve iniciar o redsnw0w.exe da pasta Pwnage em seu desktop.

Passo 4
Assim que iniciar o redsn0w, clique no botao Browse

Passo 5
Selecione o firmware ipsw que colocamos na pasta Pwnage no desktop e clique em Open

Passo 6
Apos o firmware ser verificado clique no botao Next..

Passo 7
Assegure-se de que o Cydia e o Unlock estejam selecionados e clique Next.

Passo 8
Você deverá definir a localização dos arquivos de bootloader..

Clique em Browse e selecione o arquivo bootloader 3.9 na pasta Pwnage em seu desktop.

Clique em Browse e selecione o arquivo bootloader 4.6 na pasta Pwnage em seu desktop.

Clique no botão Next para continuar.

Passo 9
Conectar seu iphone ao PC, assegure-se de que esteja DESLIGADO entao clique em Next.

Passo 10
O redsn0w vai guia-lo em como colocar seu iphone em modo DFU..

Segure o botao Home juntamente com Power por 10 segundos.

Solte o botao Power e continue mantendo Home pressionado até que o RedSn0w detecte o aparelho.

Passo 11
Seu iPhone ira reiniciar

Passo 12
O redsn0w iniciara a fazer o upload do novo disco RAM.

Passo 13
Quando o passo anterior estiver completo, voce sera notificado que o redsnow terminou. Clique em finish quando o seu iphone terminar de reiniciar (em torno de 5 minutos). seu iPhone ja estara Jailbroken e desbloqueado com Cydia e Springboard!

Follow iClarified

colindres - February 17, 2012 at 3:09am

gracias man sos mera pi ja te lo agradesco

Reply · Like

jairo - November 29, 2012 at 3:09am

thank your tutorial saved me

aaronhowto - February 5, 2012 at 6:42pm

This might be an easier method http://howtounlockandjailbreakiphoneforfree.blogspot.com/

LuckyStrike 339 - February 14, 2011 at 2:20pm

[French] Hi ! I finished to install it on my iPhone 2g and all is well-working but only Cydia can't work ... how can i do ? thanks a lot !!!

julian - January 10, 2011 at 3:02am

everything was alright until i tried to enter cydia and almost everything was erased. i have to jailbreak again? what do i have to do? thanks

motor98 - July 7, 2010 at 9:16pm

The redsn0w 0.9.4 doesn't recognize 3.1.3. So what I did is: - in iTunes, put 3.1.3 to the phone - use redsn0w 0.9.3, browser-> load in iphone OS 3.1.2, then follow the rest ... everything works.

proaskick - June 7, 2010 at 11:27am

my phone was blocked and it say that my sim is not supported by phone what should i do?

James - May 16, 2010 at 3:11am

thank you very much iclarified my iphone 2g wwas in the gutter but thanks to you it fully works now thank you for a job well done

que - May 11, 2010 at 8:37am

I love it at first I was alil misled but I got on track..now I'm trying make my sim work now...lol...thanks iclarified..

russ - March 31, 2010 at 11:22pm

The BL files do not download! Where can you get them from?

hibiscus - April 15, 2010 at 8:37pm

Go to this link: http://modmyi.com/forums/iphone-news/638291-windows-how-jailbreak-unlock-iphone-2g-firmware-3-0-redsn0w.html You can download them from here. Save them to the desktop file pwnage as designated.

AL - March 28, 2010 at 4:38pm

I have a 2G iPhone that im trying to unlock, when i follow the instruction and get to itunes it takes me to the invalid sim card. Any suggestions on how to get around it????

hibiscus - April 15, 2010 at 8:41pm

I got the same message on my iphone when i unlocked it. all i did was continue on with the instructions and everything worked fine once it was all said and done

aimanKJ - February 15, 2010 at 6:04am

thanks i clarified... ur the best

Joe - February 7, 2010 at 4:55am

Hi everyone, i have a question, hope you can help me. I have a 2G Iphone that i jailbroke with Pwnage tool to get firmware 2.2 and it works fine. I was wondering if i can i use this method to upgrade it to firmware 3 without leaving it unjailbroken or messing up the baseband? Thanks!

Joseph Brain - June 13, 2010 at 4:46pm

Yes you can. but you have use windows xp.

Christy - February 6, 2010 at 2:01am

I unlocked my phone using the RedSn0w, everything worked perfectly. But the volume is very very low, I can barely hear the other person. I tried to download a volume patch through Cydia, but the one with the drill icon won't download, says something about size being mismatched. I tried downloading one for the 2.0 version, it download and says installed, but there's no difference. Does anyone know how to fix this? Thanks

lily - February 3, 2010 at 4:35am

I'm stuck in step 2. When I open my iTunes, the restore screen doesn't come out. A box came out and says that my sim card is not compatible. What should I do? Help !!

Christy - February 6, 2010 at 1:59am

I think if you have a fresh phone that's never been used, you can skip Step two (b/c iTunes won't connect to the phone since you don't have an AT&T sim in it). Just go straight to step 3. Hope this helps.

Christy - February 2, 2010 at 10:47pm

I unlocked the phone successfully following the steps, but cannot get connected to the internet. It shows I'm connected to my wifi at home and the little blue internet icon (the little blue fan shaped icon on the top of the screen) is on, but when I try to open Cydia or Safari, it shows there's no internet connection. Can anyone help me with this? Thanks!

Christy - February 2, 2010 at 10:54pm

nvm--i put in a sim card and all of a sudden the internet is connecting...does anyone know why though? isn't the wifi network independent from the phone service carrier (i'm not subscribed to internet use thru my phone plan)?

Jean Chamoun - January 11, 2010 at 3:31am

Does Redsnow work on iTunes 9?

hibiscus - April 15, 2010 at 8:32pm

Yes it does. I just went through this process and it worked! If it says your sim is not for the right carrier, just keep going with the process and everything will work fine at the end.

Cherilynn - January 1, 2012 at 3:15pm

I'm not quite sure how to say this; you made it exretmely easy for me!

Eric - January 10, 2010 at 6:24pm

I am trying to jailbreak/unlock iPhone using this guide.. But the phone isn't activated! I have everything I need to do this but I don't know how I can go about upgrading the firmware for this device without activating the phone..

Eric - January 10, 2010 at 7:54pm

Had to enter DFU mode and restored the FW manually.

Andrew - January 22, 2010 at 2:46pm

How did you restore the framework manually?

Jamie - December 29, 2009 at 10:25pm

The links aren't working... but found the downloads on iphoneclyde.com

Christine - December 28, 2009 at 8:54pm

I downloaded the 3.1 firmware but it comes as a zipped file instead of ipsw, so I tried downloading the 3.0 version and it's the samething. When I tried to unzip it, it's just a bunch of weird files and a couple of folders and there's nothing with the whate square iTunes logo like the one show in the tutorial pics. Can anyone help me with this? Thanks!

ReleX - December 29, 2009 at 7:32am

You have to save it as .ipsw instead of zip. Right click on the link, then in the end of the name, write .ipsw and then click "download" or "OK" or whatever it says.

maria - December 29, 2009 at 4:20pm

i hat the same problem and i tried to save as ipsw instead of zip but it didn't work so i installed mozilla and worked

Christine - December 30, 2009 at 4:13am

Sorry I'm being slow (not a computer savy person), but when I right click on the link like you said, it just comes up with the normal options such as Open, Open in New Tab, etc, I don't see where I can type in '.ipsw' in place of 'zip'. When I click on the Download option from the right clicked option list, it still doesn't give me option to replace 'zip'. Can you elaborate on how to download this as a ipsw file? Thanks!

ReleX - December 28, 2009 at 1:22pm

I have now successfully made all the steps. All things worked fine. However, i discovered you can't use the 3.0.1 version when using vista, go with the 3.0 instead. I'm having problem launching cydia. Yesterday, when i used the guide, no problems what so ever using cydia afterwards. Today, i was going to install some stuff using Cydia. When I tapped the icon, it started to load as usual, then a message pops up saying some files are missing and are not up to date then i pressed OK, then it shut down to springboard. Now, when tapping the Cydia icon, it says "Loading Data", ´then shuts down to the springboard. What could be wrong? Also, I checked the "Icy" box when using Redsn0w, so I have both Cydia and Icy. I installed the Mobileterminal via Icy, but Terminal won't start either. It just shuts down and goes back to springboard. Will the Icy app interrupt Cydia or what? Please Help :)

More Comments