Como Fazer Jailbreak Em Seu iPad 1 Usando RedSn0w

POST

MAIL

Posted May 6, 2011 at 1:37pm by iClarified

Estas são as instruções de como fazer jailbreak em seu iPad 1 no firmware 4.3.3 usando RedSn0w para Windows. A versão deste tutorial para Mac está aqui.

Passo Um
Crie uma pasta em seu desktop chamada Pwnage

Faça download do RedSn0w aqui e coloque-o na pasta Pwnage. Enquanto isto, faça download do último firmware 4.3.3 abaixo e coloque-o na mesma pasta.

4.3.3 (iPad 1):iPad1,1_4.3.3_8J3_Restore.ipsw

Extraia o arquivo zip do RedSn0w dentro da mesma pasta.

Como Fazer Jailbreak Em Seu iPad 1 Usando RedSn0w

Passo Dois
Conecte seu iPad ao computador e abra o iTunes.

Selecione seu iPad na lista de dispositivos na esquerda. Agora segure a tecla Shift e clique no botão de Restaurar (Restore). É preferível restaurar porque não criará espaço desnecessário em seu iPad.

Navegue até a pasta Pwnage no seu desktop e selecione o firmware ipsw 4.3.3. Clique no botão Escolher (Choose) para continuar.

Passo Três
Uma vez que o iTunes terminar o update do firmware desejado em seu iPad, abra a pasta Pwnage em seu desktop e rode o aplicativo redsn0w da pasta redsn0w que extraímos antes.

**Usuários de Windows 7 podem precisar rodar o RedSn0w em modo de Compatibilidade com o Vista. Você pode fazer isso clicando com o botão direito no executável e selecionando "Propriedades" pelo menu..

Passo Quatro
Quando o RedSn0w abrir clique no botão (Browse

Passo Cinco
Selecione o firmware ipsw 4.3.3 que colocamos na pasta Pwnage no desktop e clique em Open.

Passo Seis
Uma vez que o firmware for verificado, clique no botão Next para continuar.

Passo Sete
RedSn0W agora preparará os dados do jailbreak.

Passo Oito
Nesta janela você pode selecionar as opções de jailbreak que desejar. Tenha certeza que Cydia esteja selecionado e clique em Nextpara continuar.

Passo Nove
Conecte seu iPad ao computador e tenha certeza que está DESLIGADO, então clique no botão Next

Passo Dez
RedSn0w agora o guiará aos passos necessários para entrar em modo DFU. Você pode encontrar mais ajuda sobre o modo DFU aqui

Segure os botões Home e Power por 10 segundos.

Solte o botão Power e continue segurando o botão Home até o RedSn0w detectar o dispositivo.

Passo Onze
Seu iPad agora reiniciará

Passo Doze
RedSn0w agora iniciará o upload do novo Disco RAM e Kernel.

Passo Treze
Assim que o upload estiver completo você será notificado que o RedSn0w está feito. Clique no botão Finish. Quando seu iPad terminar de reiniciar (aproximadamente 5 minutos) estará jailbroken com o Cydia na SpringBoard.

*Como sempre um grande agradecimento ao iPhone Dev-Team e I0n1c pelo seu trabalho duro e contribuição para a comunidade de iPhone.
**Usuários de Windows 7 podem tentar rodar o RedSn0W como administrador no modo de compatibilidade com Windows Vista ou XP caso notem dificuldades.

Follow iClarified

lawen - September 26, 2012 at 5:21pm

qwerftgyu

Reply · Like

nn - June 16, 2011 at 10:56am

I have an iPad 1 with iOS 4.2.1 and I'm trying to jailbreak it to the latest 4.3.3 and I keep getting error 3194 at the beginning of the process. The only thing unclear to me so far is if I need to update the software through iTunes alone to 4.3.3 before I follow all the described steps, since it doesn't say anything about that. Also My computer runs W7 64bit, so should I run the compatibility mode on just redsn0w or also for the ispw? I'm sorry the ignorance it's only my first time trying to jailbreak, I will appreciate any tips.

Anonymous - June 12, 2011 at 9:38pm

For those unable to download redsn0w, download it from here ('same' place, but newer executable, rc17): https://sites.google.com/a/iphone-dev.com/files/home/redsn0w_win_0.9.6rc17.zip?attredirects=0&d=1

syet - May 19, 2011 at 3:23pm

Need help! Got stucked at "Exploiting limera1n"... I already run on admi and tried both Vista and XP SP3 compatibility mode. It kept hanging... Can anyone help me please!!!! Thanks!

Vishesh - May 7, 2011 at 8:57am

i cant download d ipsw file... it goes on to certain extent... lyk 80 mb or somethin... and den it stops automatically./.... i am using google chrome... can i find a torrent or somethin instead... i wanna jailbreak ipad 1... ios 4.3.3. ...

VZA - May 1, 2011 at 5:26pm

Always freezes on "uploading ramdisk." Windows Vista and using as admin.

Dan - May 1, 2011 at 10:37am

i have everything working and when it gets to waiting for reboot nothing happens have tried ten time and just get to the same point over and over. I am on a xp computer. although the one thing i notice is evertime i get to that step a window pops up and says usb cable malfunctioned suddenly. not sure it that is the problem or not. Any help thanks

Luna Heart - April 28, 2011 at 9:28pm

Question: "Hold shift to restore as it won't create any wasted space" - will this erase everything on my iPad?? I don't want to go back to factory settings!!!

jeseny castillo - April 24, 2011 at 1:31am

I need to know when the unfreezing of the iphone is going to go out 3gs version 4.3 (8f190)

Coose - April 24, 2011 at 12:35am

VERY IMPORTANT FOR W7 USERS: Run in XP SP3 Compatibility mode and Run As Administrator. If you don't you'll see that you're stuck at the Dowloading Ramdisk and it will never finish

Soul Eater - Starz - April 27, 2011 at 6:46pm

That actually worked, thanks a million man! x3 ;D

Moe - April 23, 2011 at 5:41pm

Thanks! It took me some time, but I finally jailbroke my Ipad. Advice to those attempting to do this....READ THE INSTRUCTIONS CAREFULLY. Thanks Again for the tutorial; keep it up guys!

ddt - April 22, 2011 at 10:27pm

Am stuck at the Exploiting limera1n phase... have done everything which is said here.... XP mode, run as administrator.. I even hard rebooted the ipad... the process ran but when the ipad is switched on..... no cydia... What else can i do?

ddt - April 24, 2011 at 6:56pm

I am using an ipad1 and even following the tutorials the tool gets stuck at at the exploiting limera1n stage. I am using Windows Vista and am running the tool with WinXP SP2 compatibility mode. Would there be any complications? Please let me know. Thanks.

What - April 21, 2011 at 11:53pm

Well, I'm having issues. I can't get this firmware or the previous one to update to the iPad (currently at the tethered 4..2.1). No matter what I do, I get an error code of 3194. I even went und modified the 'hosts' file in System32 to have the "74.208.105.171 gs.apple.com" line in it. No difference. I must doing something silly, but I'm at a loass as to what. Any ideas? I know I was having this issue at work too. both machines are W7 64bit. Is there a problem with the 64bit version perhaps?

banzaj - April 20, 2011 at 8:13am

Same problem here - stuck at upload ramdisk or Kernel.. Ipad1 64gb

banzaj - April 22, 2011 at 2:19am

Im DONE! If u are on Win7, run RedSn0w in compatibility mode ( WinXP SP 3 ) and RUN as Administrator! ( tested on RedSnoW14 ).

Cloud - April 19, 2011 at 6:01am

When is ipad 2 jailbreak coming out?

Murray Kerdman - April 15, 2011 at 12:43am

Forgive a nubee question. If I (A) fully "Sync" and "Backup" my iPad 1 (which is at 3.2.2) in iTunes beforehand and (B) follow the Tutorial and "Restore" my iPad to 4.3.1 and (C) use redsn0w RC12 to Jailbreak it will I (D) get back all of my programs and their associated data files (30GB of 64GB) (none of which are in iTunes itself- i.e. no music or video) when I "Re-Sync" the iPad 1 with iTunes? Also, will the above work with 4.3.2 just as well? Thanks in advance!

James - April 28, 2011 at 1:29pm

Hi...did you ever get a response to your question..I have the same question and am curious of the answer.

nurlip - April 12, 2011 at 10:33pm

did anyone else have problems when they got to the part that says "make sure your ipad is off and connected to the computer, then click next"? I feel like an idiot b/c i'm good at these things but i turn my ipad off and as soon as the screen goes black, the damn thing comes back on by itself (b/c its plugged in..). I thought it was always like this but i don't usually turn it off while connected to the computer so i'm probably wrong. any tips on how to proceed?

nurlip - April 13, 2011 at 10:51pm

just in case anyone else had this problem - i resolved by waiting for the screen to go black, (as in power off) then, before it auto-booted, i pushed/held the two buttons right then and it worked. the apple logo still showed up but after holding the buttons for about 6 seconds, it disappeared and it went into DFU mode. jailbreak is working fine and video mirroring with HDMI is pretty f'in sweet.

LVE - April 12, 2011 at 4:44pm

theres some error with redsnow.exe... all the way to the step to install cydia click next... when it upload the ramdisk... the redsnow stopped, and i get error tried 3 times, stuck at upload ramdisk, error redsnow.exe... any idea? wait for next jb?

RichardU - April 8, 2011 at 2:47pm

Hi i do everything step for step, but it gets stuck on the last step where it says "uploading ramdisk" Any help would be really appreciate it.

jose cuervo - April 12, 2011 at 9:49am

I have experience the same thing... Need help for this matter.....

ALEX - April 12, 2011 at 8:47pm

go to redsnow click right click propertys select run like windows xp mode run as adminitrator that works fr me

Lve - April 15, 2011 at 5:04pm

i think ive solve this mather, i also tried many times and it didnt work... when i are in step 10 DFU mode, nr 3 when you relase the sleep button but hold the home, its 15sec, but when it reach 12-13sec JB switch to upload disk, so dont release the home button until the last 12 sec, so you have to do an count down 12 to 0 sec before release the home button, then it should work. If fail just press sleep + home at the same time and try again... GL

sunnybear - April 8, 2011 at 9:39am

im new to this. couple of questions i would like to ask. what would happen to all my old app, and games. how do i keep them along with all the saves after upgrade? thanks in advace.

More Comments