Como "Jailbreak" tu iPhone, iPod con BlackRa1n [Mac]

POST

MAIL

Posted October 14, 2009 at 12:12am by iClarified

Estas son las instrucciones para realizar un "jailbreak" de tuiPhone and iPod touch con BlackRa1n usando un Mac.

El BlackRa1n jailbreak solo funccionara con el firmware 3.1.2 firmware. Cuidado que no functiona con el firmware 3.1.3.

Para aquellos con el nuevo ipod touch o el nuevo iphone 3GS. BlackRa1n solo supporta el tethered jailbreak. Eso quiere decir que una vez el jailbreak esta hecho, no deje tu bateria morir. Si esto sucede, conecta el telefono a la computadora i usa el blackRa1n para empezar el iphone.

Vale, comenzamos...

primero
Abra su web browser y naviga al http://www.blackra1n.com. Haz un Click sobre Apple logo abajo en la portada.

Como "Jailbreak" tu iPhone, iPod con BlackRa1n [Mac]

Segundo
Se le propone guardar en su desktop. Hazlo.

tercero
Abre el file blackra1n zip para extraer la "application", luego haz un doble click para empezar la "BlackRa1n".

Cuarto
Si tu iPhone/ iPod no esta conectado a la computadora, hazlo ahora. Cuando este conectado, haz click sobre make it ra1n.

Quinto
Su iPhone entrrar en el "recovery mode".

Vera una foto de GeoHot remplazando aquella regular de "recovery mode" en su iphone/ipod.

blackra1n empezara y luego su iphone/ipod reanudara.

Un mensageaparecera para informale que BlackRa1n es gratis y que su donacion a GeoHot at geohot@gmail.com sera apreciada .

Sexto
Una vez su iphone/ipod reanuda, sera "jailbroken" y vera un boton blackra1n. Ahora va a necesitar coneccion internet por WIFI antes de empezar el BlackRa1n en su iPhone/iPod.

Cuando vera la senal de internet wifi, haz click sobre "blackRa1n" i elige el programa que quiere. luego haz click a Install boton a la derecha arriba en su iphone/iPod.

BlackRa1n instalara las programas requiridas.

Septimo
Cuando BlackRa1n acabe, vera su programa en su iPhone/iPod.

Octavo
Confirma que su iPhone/iPod esta funcionando como deseado. En este caso, puede eliminar el "BlackRa1n" con presinar "delete" en el programa "BlackRa1n".

***THANKS: Muchas Gracias a Geohot por hacer posible el jailbreak. Tambien, mucas gracias a todo aquellos que han contribuido a su exito.

Follow iClarified

Shopping cart solutions - February 23, 2012 at 7:03am

I phone is the one of the best cell phones in world were it has a good camera.touch screen and iA5 chip for fastest performance.

Reply · Like

Alessan - March 10, 2012 at 3:56pm

Greetings! Quick question that's plecoetmly off topic. Do you know how to make your site mobile friendly? My weblog looks weird when viewing from my apple iphone. I'm trying to find a template or plugin that might be able to correct this issue. If you have any recommendations, please share. Cheers!

Ahmed - April 6, 2014 at 9:33am

Bin abood

Sergio - December 26, 2011 at 6:25pm

I wanna say thank you for your free app, but doesn't work in my iphone, can you help me???

chris - February 13, 2010 at 6:25pm

I just bought a brand new Iphone 32gig 3GS and connected my device and ran blackra1n. Now the phone seems to still be in restore mode but it does not come on. I've tried to reboot the device by clicking home and power button but it doesn't seem to help. Screen does not come on. I've paid an astronomical price on getting this device without contract. Please help!!!

Ecua4ever - February 19, 2010 at 2:47pm

my friend you have to run blackra1n again and again an the second time will work fine don't worry tray again i hope this helps to you

Clive The Butcher - January 30, 2010 at 12:13pm

Could anyone help? I've tried to jailbreak using a Mac Powerbook G4 on 10.4.11 but when I click make it rain I do not get the image as it reboots. Instead a image becomes one of the white lead instructing to connect to iTunes. When I do this it tells me that there is an error and the phone needs to be restored. I've restored the phone and tried again. I've followed the above steps, tried with iTunes open and closed but still no image as it reboots. Am I missing something? Thank you Geohot for all the effort in making this!

joe - March 8, 2010 at 12:20pm

yeah, i tried with exactly same configuration as yours, and no luck.. then i tried on a macbook pro with leopard and yes! it worked :)

Jayden - January 21, 2010 at 10:13pm

i'm scared to death to jailbreak my Iphone becuase its the only phone i have and everyone keeps telling me it will shut my phone down, is that true?

sokchea - January 18, 2010 at 1:23am

hi just do it one time, i can jailbreak my factory-unlock iphone 3gs version 3.1.2. i followed the instruction above first time, the iphone is still in dfu mode. but i click on the blackra1n and click on make it ra1n. then the phone restarted and work flawlessly; wifi is working, the phone call is ok. i can also install cycdia. thank for your help, iclarified.

greg - January 9, 2010 at 8:34am

i suggest not updating the carrier settings after the jailbreak. I launched itunes and it prompted me to update the carrier settings i did it and I couldn't connect to the network overseas anymore so i have to restore the software with itunes and the backup which took another hour or more.

Greg - January 10, 2010 at 9:36am

jailbreak worked only issue I have is it has trouble with wifi I connects to the network that I always could get on but can't get any internet.

Ahmed - April 6, 2014 at 9:31am

Hdbbdbdn

How kikers

ste.ve - January 7, 2010 at 3:23pm

Neither one - BlackRa1n or pwnage works for me. I have an legally bought (without the need to activate it) iPhone 3GS and Mac OSX 10.6 -Snow Leopard. With BlackRa1n, all seemed fine up to the moment it was supposed to reboot at last - it didn't and remained in the Recovery mode. With Pawnage I normally created the Jailbroken package (as many times before on OSX 10.5 and my old 3G iPhone), and when in recovery, I chose the customized package - everything seemed to be running just right until "Checking with software update server" or something like that appeared - and suddenly, it dropped back to recovery mode... Any ideas will be strongly appreciated!!! Thank you!!

gurkan - February 12, 2010 at 5:02pm

You have to run blackrain twice. Did you do that?

Rachela - January 5, 2010 at 5:47pm

I had no trouble, I updated the software in itunes... then it said my sim wasnt supported (no shocks there... 2 degrees in NZ - iPhone 3G !), then after it restored to 3.1.2 I opened Blakra1n with itunes still open (Mac 10.5.8 BTW) and clicked make it rain... what's the problem with everyone else.. mine worked perfectly !! Only thing is iTunes app doesnt work (I use MXTube whih is better) but the big problem is no MMS support :(

fatman - December 25, 2009 at 11:24pm

i hooked it up and it was recovering but then itunes said i hav to restore it and i did but it didnt reboot. Ipod touch 32GB

fatman - December 25, 2009 at 11:35pm

got it to work sorry

Pablo Garcés - December 13, 2009 at 1:38pm

This is a good one for you all (hopefully someone can help me). So my iPhone has been dead for months. Bought it abroad unlocked and jailbroken. I installed 3.1 by accident directly from iTunes and it died (got nothing but the itunes icon and usb cable image). I used blackra1n and now I have an overpriced iPod Touch! It is better than nothing and I am very thankful but I cannot unlock the iPhone since the blackra1n icon does not appear on my desktop. Finally I get passed that screen and somethings work but I'd like my phone back. Does anyone know what I could do? Help will be greatly appreciated. (by the way, I have a mac and when I used blackra1n "iTunes could not connect to this iPhone because an unknown error occurred OXE8000065") Thanks in advance!

Drew - January 17, 2010 at 6:30pm

Did you get your problem figured out?

qoz - November 14, 2009 at 10:18pm

I've successfully flash the Blackra1n but it seems I can't download the Cydia or Rock ... it only downloads 1% and get stuck.. then it shows "Error: Timed out" .. does my IP has been blocked or what ? :( btw, i'm using iPod 3.2.1 HELP !

holy - November 12, 2009 at 3:25am

i clicked "make it rain" etc and the pop up massage appeared, but the screen is not changing to GeoHot's picture... and it's not rebooting! am i doing it wrong or something? sorry if i'm such a newb :(

@Levski - November 9, 2009 at 11:07am

Possible solution to GPS, WiFi, Youtube problems. What I did is, I put my original O2 SIM card and restored my iPhone 3GS with iTunes to factory settings. Then I jailbreaked wih BlackRa1n (still with O2 SIM) and unlocked with BlackSn0w. i checked to see if all is working - YES. After that i just replaced the SIM with "unsupported" SIM that I use. All is working: WiFi, GPS and Youtube without any problem. Hope this helps.

Rog - November 3, 2009 at 9:44pm

Fisrt of all, thank you geohot!!! You saved my iPhone! Everyhting was OK, the JB and the unlock, mu iPhone working perfectly.....but i have a problem: my GPS is not working, it can't locate anything. Does anyone also have this problem? Any solution? Thanks

waleed shannik - November 3, 2009 at 6:01am

hello... i updated my iphone into 3.0 to 3.1.2 and i have a problem now when i use redsnow to jailbreak it's not working please help me

Sean - October 26, 2009 at 5:06am

I successfully jailbroke my phone that was on 3.1.2, but for some reason I do not have MMS support, anyone know why?

Shyaam - November 3, 2009 at 4:02am

Yea same with me my mms isn't working but It costed $5

Super - December 18, 2009 at 5:49pm

Man if you know can you help me too. I have been looking online for any post, but I guess the 3G 3.1.2 can send but not receive MMS. There is a fix for the 2G but I dont see anything for the 3G

Zetroi - October 24, 2009 at 7:59am

My brand new 3GS, 3.1.2, doesn't reboot and stays on recovery mode at the end of the process, even if blackra1n says that the jailbreak is done. Is it because of the new boot rom iBoot-359.3.2?

Ryan Erwin - October 25, 2009 at 5:47am

Same issue for me. Running Hong Kong version of the iPhone 3GS (official, factory unlocked). My iPhone wasn't booting properly, so I launched it in DFU mode, then started blackra1n. Blackrain says it worked properly, but has been stuck on the shutdown screen for 10 minutes now with the hourglass continuously spinning.

shyaam - October 26, 2009 at 4:02am

umm. you guys, as ive said have itunes 9 and blackra1n open with your device on STOCK apple firmware 3.1.2 and have your device on like normal. It will work

Zetroi - October 26, 2009 at 2:54pm

Solved! Just use the new version of Blackra1n.

taolin96 - November 25, 2009 at 6:58am

Zetroi, you need to click "make it ra1n" after the first jailbreak

Qrandky - October 21, 2009 at 1:56am

Try this, it might work for you, it did work for me and managed to JB the iPhone 3G with no problems. And after fiddling with it many times. Switch off your phone. Get iTunes started. Have black rain application running Plug in phone to PC Switch on phone While phone is booting up And just when you notice that itunes is dedecting your phone click on make it rain. Worked for me, can try it if you wanna

Shyaam - October 19, 2009 at 8:13pm

Lol you guys you do know a notepad file comes with the download. It might tell you what went wrong. Oh and it is the fastest jailbreak ever and you also have to have iTunes open when you do it

More Comments