Comment jailbreaker votre iPhone, iPod avec BlackRa1n [Mac]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted October 14, 2009 at 12:12am by iClarified
Voici les instruction pour jailbreaker votre iPhone, iPod avec BlackRa1n pour mac.
Le jailbreak de BlackRa1n fonctionne avec le dernier firmware 3.1.2 ; Malheureusement il n'activera pas votre iPhone. Ce qui signifie que si vous n'êtes pas sur un opérateur officiellement autorisé par Apple, BlacRa1n ne pourra pas l'activer.
Pour ceux qui possèdent le nouvel iPod touch, BlackRa1n supporte seulement le jailbreak dis : tethered. Cela signifie que un fois jailbreaké, vous ne devez jamais laisser votre batterie se vider. Si cela arrive, vous serez obligé de le reconnecter à l'ordinateur et d'utiliser BlackRa1n pour le démarrer.
ATTENTION: Même si le jailbreak de GeoHot support le 3.1.2 ne le mettez pas à jours si votre iPhone est en OS 3.0.1 ou 3.1. Vous perdrez votre desimlock. Utilisez PwnageTool pour mettre à jour en toute sécurité en 3.1 sans faire de mise à jour du baseband. Si vous avez réellement besoin du 3.1.2, alors patientez pour la prochaine version de Pwnage Tool. Si vous avez déjà mis à jours en 3.1 ou 3.1.2 sans utiliser PwnageTool, vous avez perdu pour le moment la possibilité de débloquer votre iPhone. Vous pouvez maintenant utiliser BlackRa1n pour au moins retrouver votre jailbreak :)
Ok, commençons...
Étape un Ouvrez le navigateur de votre choix et allez à http://www.blackra1n.com. Cliquez sur le logo Apple en bas de l'écran. Si le lien ne fonctionne pas, vous pourrez aussi le trouver sur le site http://www.marchetto.at en direct download. Étape deux Quand on vous le demandera, enregistrez le fichier sur votre bureau
Étape trois Maintenant double-cliquez sur le fichier zip blackra1n téléchargé pour extraire l'application, enfin double-cliquez sur l'icône de l'application pour lancer le programme
Étape quatre Vérifiez que votre iPhone ou iPod est connecté à l'ordinateur et cliquez ensuite sur le gros bouton make it ra1n
Étape cinq Votre iPhone va maintenant passer en mode restauration.
Vous allez voir une photo de GeoHot qui remplace l'écran normal de restauration sur votre iPhone.
blackra1n va travailler et ensuite votre appareil va redémarrer.
Une popup va apparaitre pour vous informer que BlackRa1n est un logiciel gratuit et que si vous l'appréciez vous pouvez faire un don pour GeoHot à geohot@gmail.com.
Étape six Une fois votre appareil redémarré il est jailbreaké et vous devez apercevoir un icône blackra1n sur votre springboard. Vérifiez que vous avez une connexion internet et lancez cette application.
Choisissez l'application de votre choix et appuyez sur le bouton Install en haut à droite de l'écran.
BlackRa1n va télécharger et installer l'application que vous avez choisie.
Étape sept Une fois terminé, BlackRa1n va faire un respring de votre iPhone et vous trouverez l'application que vous avez sélectionnée sur votre écran.
Étape huit Quand vous avez vérifié le fonctionnement de l'application que vous avez sélectionnée, vous devez utiliser le bouton Uninstall blackra1n dans l'application BlackRa1n pour supprimer celle-ci de votre springboard.
***REMERCIEMENTS: Un gros merci à Geohot pour avoir rendu ce jailbreak possible. Merci aussi à tout ceux qui ont contribué à ce succès.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Greetings! Quick question that's plecoetmly off topic. Do you know how to make your site mobile friendly? My weblog looks weird when viewing from my apple iphone. I'm trying to find a template or plugin that might be able to correct this issue. If you have any recommendations, please share. Cheers!
I just bought a brand new Iphone 32gig 3GS and connected my device and ran blackra1n. Now the phone seems to still be in restore mode but it does not come on. I've tried to reboot the device by clicking home and power button but it doesn't seem to help. Screen does not come on. I've paid an astronomical price on getting this device without contract. Please help!!!
Could anyone help? I've tried to jailbreak using a Mac Powerbook G4 on 10.4.11 but when I click make it rain I do not get the image as it reboots. Instead a image becomes one of the white lead instructing to connect to iTunes. When I do this it tells me that there is an error and the phone needs to be restored. I've restored the phone and tried again.
I've followed the above steps, tried with iTunes open and closed but still no image as it reboots. Am I missing something? Thank you Geohot for all the effort in making this!
hi just do it one time, i can jailbreak my factory-unlock iphone 3gs version 3.1.2.
i followed the instruction above first time, the iphone is still in dfu mode. but i click on the blackra1n and click on make it ra1n. then the phone restarted and work flawlessly; wifi is working, the phone call is ok. i can also install cycdia.
thank for your help, iclarified.
i suggest not updating the carrier settings after the jailbreak. I launched itunes and it prompted me to update the carrier settings i did it and I couldn't connect to the network overseas anymore so i have to restore the software with itunes and the backup which took another hour or more.
Neither one - BlackRa1n or pwnage works for me. I have an legally bought (without the need to activate it) iPhone 3GS and Mac OSX 10.6 -Snow Leopard.
With BlackRa1n, all seemed fine up to the moment it was supposed to reboot at last - it didn't and remained in the Recovery mode.
With Pawnage I normally created the Jailbroken package (as many times before on OSX 10.5 and my old 3G iPhone), and when in recovery, I chose the customized package - everything seemed to be running just right until "Checking with software update server" or something like that appeared - and suddenly, it dropped back to recovery mode...
Any ideas will be strongly appreciated!!! Thank you!!
I had no trouble, I updated the software in itunes... then it said my sim wasnt supported (no shocks there... 2 degrees in NZ - iPhone 3G !), then after it restored to 3.1.2 I opened Blakra1n with itunes still open (Mac 10.5.8 BTW) and clicked make it rain... what's the problem with everyone else.. mine worked perfectly !! Only thing is iTunes app doesnt work (I use MXTube whih is better) but the big problem is no MMS support :(
This is a good one for you all (hopefully someone can help me). So my iPhone has been dead for months. Bought it abroad unlocked and jailbroken. I installed 3.1 by accident directly from iTunes and it died (got nothing but the itunes icon and usb cable image). I used blackra1n and now I have an overpriced iPod Touch! It is better than nothing and I am very thankful but I cannot unlock the iPhone since the blackra1n icon does not appear on my desktop. Finally I get passed that screen and somethings work but I'd like my phone back. Does anyone know what I could do? Help will be greatly appreciated. (by the way, I have a mac and when I used blackra1n "iTunes could not connect to this iPhone because an unknown error occurred OXE8000065") Thanks in advance!
I've successfully flash the Blackra1n but it seems I can't download the Cydia or Rock ... it only downloads 1% and get stuck.. then it shows "Error: Timed out" .. does my IP has been blocked or what ? :(
btw, i'm using iPod 3.2.1
HELP !
i clicked "make it rain" etc and the pop up massage appeared, but the screen is not changing to GeoHot's picture... and it's not rebooting! am i doing it wrong or something?
sorry if i'm such a newb :(
Possible solution to GPS, WiFi, Youtube problems. What I did is, I put my original O2 SIM card and restored my iPhone 3GS with iTunes to factory settings. Then I jailbreaked wih BlackRa1n (still with O2 SIM) and unlocked with BlackSn0w. i checked to see if all is working - YES. After that i just replaced the SIM with "unsupported" SIM that I use. All is working: WiFi, GPS and Youtube without any problem. Hope this helps.
Fisrt of all, thank you geohot!!! You saved my iPhone!
Everyhting was OK, the JB and the unlock, mu iPhone working perfectly.....but i have a problem: my GPS is not working, it can't locate anything.
Does anyone also have this problem? Any solution?
Thanks
Man if you know can you help me too. I have been looking online for any post, but I guess the 3G 3.1.2 can send but not receive MMS. There is a fix for the 2G but I dont see anything for the 3G
My brand new 3GS, 3.1.2, doesn't reboot and stays on recovery mode at the end of the process, even if blackra1n says that the jailbreak is done. Is it because of the new boot rom iBoot-359.3.2?
Same issue for me.
Running Hong Kong version of the iPhone 3GS (official, factory unlocked).
My iPhone wasn't booting properly, so I launched it in DFU mode, then started blackra1n. Blackrain says it worked properly, but has been stuck on the shutdown screen for 10 minutes now with the hourglass continuously spinning.
umm. you guys, as ive said have itunes 9 and blackra1n open with your device on STOCK apple firmware 3.1.2 and have your device on like normal. It will work
Try this, it might work for you, it did work for me and managed to JB the iPhone 3G with no problems. And after fiddling with it many times.
Switch off your phone.
Get iTunes started.
Have black rain application running
Plug in phone to PC
Switch on phone
While phone is booting up
And just when you notice that itunes is dedecting your phone click on make it rain.
Worked for me, can try it if you wanna
Lol you guys you do know a notepad file comes with the download. It might tell you what went wrong. Oh and it is the fastest jailbreak ever and you also have to have iTunes open when you do it