Como hacer Jailbreak a un Apple TV 2G usando Seas0nPass (Mac) [4.2.1]

POST

MAIL

Posted January 20, 2011 at 2:07am by iClarified

Estas son las instrucciones de como hacer jailbreak a un Apple TV de segunda generación usando Seas0nPass.

**Actualmente, solo es posible hacer un jailbreak tethered en el firmware 4.2.1***

Paso Uno
Descarga la última versión de SeasonPass de here.

Paso Dos
Da doble click para extraer el archivo que descargaste. Nuevamente da doble click para lanzar la aplicación.

Como hacer Jailbreak a un Apple TV 2G usando Seas0nPass (Mac) [4.2.1]

Paso Tres
Da click OK para continuar en la advertencia de el jailbreak tethered.

Paso Cuatro
Se te pedirá los datos del Administrator. Ingresa tu nombre de usuario y password, a continuación haz click en el boton OK.

Paso Cinco
Se te preguntará si deseas activar el UI Scripting. Da click al boton Enable.

Paso Seis
Da click en el boton Create IPSW de la ventana principal.

Paso Siete
Seas0nPass comenzará a descargar el más reciente firmware del Apple TV.

Paso Ocho
Seas0nPass comenzará a crear un archivo de custom IPSW por tí.

Paso Nueve
Una vez que tu archivo de custom IPSW ha sido creado, Seas0nPass te pedirá que conectes el Apple TV a tu computadora por medio de un cable micro-USB y uses tu control remoto para poner en modo DFU manteniendo presionando MENU y PLAY/PAUSE por 7 segundos. El cable de poder deberá estar desconectado durante este proceso.

Paso Diez
Una vez que tu Apple TV ha sido detectado en modo DFU, Seas0nPass comenzará a subir algunos archivos, lanzando automaticamente iTunes, y comenzará a restaurar el nuevo firmware.

ENCENDIDO TETHERED
Para encender tu Apple TV necesitas seguir estas instrucciones.

Paso Uno
Lanza Seas0nPass ando doble click en este icono.

Paso Dos
Selecciona Boot Tethered del menu principal.

Paso Tres
Conecta el Apple TV a la computadora por cable USB, conéctalo a la toma de corriente, y mantengas presionado MENU y PLAY/PAUSE en el control remoto del Apple TV por 7 segundos.

Paso Cuatro
Seas0nPass detectará el dispositivo en modo DFU y comenzará el proceso de inicio.

Paso Cinco
Una vez de el inicio tethered esta completo puedes remover el cable USB y conectar el cable HDMI para comenzar a usar tu dispositivo con jailbreak!

Follow iClarified

Danny G - December 20, 2012 at 2:20am

to re-write what I wrote (in english this time) --- I'm not able to find the location of the custom IPSW when browsing with itunes's open "file locator" window, due to the fact that one of the folders is hidden (and iTune's lile locator can't seem to view hidden folders??) --- I am however able to find it with the regular finder in this location: ---- *homefolder*/Library/Application Support/Seas0nPass/Firmware ----- From here, I copy the file, paste it on my desktop, and then point itunes to my desktop in attempts to JB my pos atv2. ---- I'm running iOS 5.1.1 btw (52xx) firmware, itunes 11.0 and Seas0nPass 0.8.8.

Reply · Like

Danny G - December 20, 2012 at 2:15am

I'm not able to find the location of the file when browsing with itunes's open "finder" do to one of the folders being hidden (not just not appearing through iTunes when manually looking for the file) I am how ever able to find it with the regular finder in this location: *homefolder*/Library/Application Support/Seas0nPass/Firmware from here, I copy the file, paste it on my desktop, and then point itunes to my desktop in attempts to JB my pos atv2 I'm running iOS 5.1.1 btw (52xx) firmware itunes 11.0 and SP 0.8.8

apit - February 5, 2011 at 10:49am

have performed every step as described. Screens report OK Done but ATV2 (4.1.1) does not seem to be JB'd. Cannot access it thru network IP. There is a screen coming up every time I perform the Seasonspass: "iTunes restore script failed selecting IPSW in Finder" but actions are done anyway

api - February 9, 2011 at 9:42am

The Restore Script seems to have a problem. That's why You have to perform the restore process Yourself. On a Mac hold ALT and click restore in iTunes, then choose the appropriate atv2 IPSW file in Your home directory on the home disc drive... and load it.

jjabbba - February 11, 2011 at 9:37am

I had the same problem. There is an easy fix. Just before SeasonPass failes it will open a finder window where the IPSW file it created is located. In iTunes, hold down the 'alt' button while clicking 'restore'. You will see a file selector popup. Just select the IPSW file created by seasonpass and let iTunes 'restore' using that file. After the restore you can proceed with the tethered booting step.

Nacho - April 3, 2011 at 2:42pm

Hi, I would very much appreciate your help. Where does Seas0npass save the new IPSW file? I have to manually select it on iTunes to do de restore, but I don't know where it is. THANK YOU VERY MUCH!! Cheers!

Big - February 1, 2011 at 9:15am

I successfully followed all the steps and saw exactly the screen which showed in the tutorial until the last step, then rebooted with the steps following the tutorials. Then disconnected the Apple TV and connected to my TV. Then, it stuck at the initial loading screen which is APPLE logo, it did not go any further than that. What should I do? Did I successfully jailbreak my device or not? Thank you for any helps.

El Norte - February 1, 2011 at 9:53am

It's the tethered boot you need to do. If it hangs on the Apple logo, it means you need to boot tethered. If you already did that, run the jailbreak again.., start from the the top. The tethered boot didn't work for me either, the first time, after that.., like a charm. But, your AT2 is jailbroken now.., otherwise it would boot normally...

Big - February 1, 2011 at 10:37am

I had done the "Boot Tethered" from the SeasonOnPass twice after I successfully jailbreak my device. I did receive the successful info said disconnected your device and connect to HDMI. Do you mean I have to start from the beginning of this tutorial and do it again? If I did, it should overrite whatever I had in the apple tv now, I did not get it. Well, just read a post. Could you explain in details how did you get passed it? Do you mean that I just jailbreak the device? then disconnect the device, do not run the "boot tethered" at all?

El Norte - February 1, 2011 at 12:49pm

The whole process.., from the top. I did it step by step and it didn't work.., then I read somewhere else that I had to do it twice. So I did the the whole thing again from the top of the page (including the tethered boot, you have to that every time your AT2 looses power). Then it did work.

Big - February 1, 2011 at 1:31pm

I did not connect the power source to the AT2 when I followed the instruction because I connect the AT2 to computer, AT2 get the power from the computer. I guess that I should connect to the wall power when I follow the instruction?

slander - February 9, 2011 at 8:13am

This is exactly what is happening to me to,im stuck looking at the apple logo after following all the steps . Is that my apple tv 2 bricked or anyone know?

slander - February 9, 2011 at 8:47am

i dont get asked to enable ui scripting at any point either??

big - February 9, 2011 at 4:37pm

I did successfully JB ATV2. ( slander, ignore the enable ui scripting message, that does not matter ). Just keep doing it and I tried more than 10 times. The problem is this JB is tethered JB, so apple tv has to connect to the power source all the time, and even when you did not use apple tv for more than 24 hours, it will auto put into the sleep mode or whatever, did not require any power at all. Then when you use it again, it stuck at the apple logo again. That is sucks. All of the setting was gone, JB was gone. I guess this is a working tutorial but it is not permanent fix for ATV2. Thoughts?

El Norte - January 24, 2011 at 3:26am

I just can't seem to get my ATV in DFU mode. Anybody else got that problem.., or anybody has a solution for that? Up until the point where it says.., hook it up to USB en enter DFU mode.., it just doesn't see or register the ATV2.., and yes.., I do believe I do everything according to the instructions and I have a microusb (It is, however, a mini-to-micro-usb plug, would that matter?) Thanks...

Me - January 28, 2011 at 5:26pm

plug in USB first and wait until the led starts flashing consistently - then plug in power cord and finally hold MENU and PLAY/PAUSE button for 7 secs then it should kick into DFU

El Norte - January 29, 2011 at 4:35am

It was the mini-to-micro usb adapter which caused the problem. I got a dedicated usb-to-micro cable and it went without a hitch. Thanks for the reply. I did have to run through the process twice in order to boot tethered.., but that was ok. XBMC runs perfectly now...

tman - January 21, 2011 at 2:53pm

Will this allow me to watch Hulu on ATV? If not, is this possible?

J. Bloggs - January 21, 2011 at 4:31am

When you say tethered boot does this mean when booting from standby or when booting from a complete power dowm ie power off at the mains???

Extrave - January 20, 2011 at 5:33pm

Does any one know how to resolve the 1601 error every time I attempt a jailbreak on the Apple TV 2g I reacive this same error even after reinstalling itunes the error continues please help.

Jou - January 30, 2011 at 10:09am

I have exactly the same problem.

Brian - January 20, 2011 at 9:28am

Do any of you know of some good site to check out all the different features and apps you can add to the Apple TV after jailbreaking? I do jailbreak my phone but I haven't seen enough compelling reasons to do my Apple TV. I don't really need it to play different media types since I rip all of my own movies to work with the Apple TV. I need a more compelling reason, I'm just not sure what's out there in the Apple TV jailbreak world.

Twitter - January 20, 2011 at 12:53pm

Hope this helps. Follow this twitter blog: http://mobile.twitter.com/appletvhacks#14299987340959744

xbmc's mom - January 23, 2011 at 7:00pm

xbmc