Jailbreak des iPhone mit QuickPwn (Mac) [Version 2.2]

POST

MAIL

Posted January 30, 2009 at 11:57am by iClarified

Dies ist die Anleitung für den Jailbreak des iPhone mit QuickPwn. Diese Anleitung wurde für die neueste Version (2.2) der iPhone-Firmware aktualisiert. Vor Beginn bitte sicherstellen, dass das iPhone in iTunes durch Klicken auf die Fläche Wiederherstellen auf die Firmware-Version 2.2 zurückgesetzt wurde.

Anmerkung: Diese Anleitung kann als erster Schritt zur Entsperrung des iPhone 2G genutzt werden. Einfach dieser Anleitung zum Jailbreak vollständig folgen, dann den BootNeuter von Cydia installieren, um das Entsperren abzuschliessen.

1. Schritt
Einen Ordner Pwnage auf dem Schreibtisch anlegen.

2. Schritt
QuickPwn 2.2 von here herunterladen und im Pwnage ablegen. Ebenso die neueste Firmware 2.2 vom nachfolgenden Link herunterladen und im selben Ordner ablegen.

2.2.0 (2G): iPhone1,1_2.2_5G77_Restore.ipsw
2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

Jailbreak des iPhone mit QuickPwn (Mac) [Version 2.2]

3. Schritt
Mit Doppelklick das QuickPwn [QuickPwn_22.dmg] Diskimage mounten. Den QuickPwn Programm-Icon in den Pwnage Ordner auf dem Schreibtisch ziehen.

4. Schritt
Mit Doppelklick QuickPwn aus dem Pwnage Ordner starten.

5. Schritt
OK klicken, um die Copyright-Hinweise zu akzeptieren.

6. Schritt
Nach Aufforderung das iPhone mit dem Computer verbinden, dann OK klicken.

7. Schritt
QuickPwn wird nun vom angeschlossenen Gerät automatisch erkannt!

8. Schritt
QuickPwn wird nun automatisch die neueste Firmware für dieses Gerät suchen.

9. Schritt
Sie werden gefragt, ob Sie die originalen Boot- und Wiederherstellen-Logos auf Ihrem iPhone ersetzen wollen. Wählen Sie Yes oder No um fortzufahren.

10. Schritt
QuickPwn wird nun anfangen, Ihre angepasste lPSW zu erstellen.

11. Schritt
Sie werden gebeten, Ihren Administratornamen und -passwort einzugeben. Bitte eingeben, dann OK klicken um fortzufahren.

12. Schritt
QuickPwn wird Ihnen nun helfen, Ihr iPhone in den DFU Modus zu versetzen. Zuerst das Gerät ausschalten.

Als nächstes werden Sie gefragt, sowohl den Home als auch An/Aus Knopf für 10 Secunden gedrückt zu halten.

Schließlich lassen Sie den An/Aus Knopf los während Sie den Home Knopf für weitere 10 Sekunden gedrückt halten.

13. Schritt
QuickPwn wird nun automatisch anfangen Informationen an Ihr iPhone zu senden.

14. Schritt
Sie werden informiert, dass QuickPwn Ihr iPhone modifiziert. Diese Prozedur wird einige Zeit dauern und das iPhone wird währenddessen neu gestartet. Während dieser Prozedur nichts machen und abwarten bis die Prozedur abgeschlossen ist!

15. Schritt
Nachdem Ihr iPhone neu gestartet ist, wird es "jailbroken" sein und sowohl Cydia und Installer im Springboard zeigen!

Follow iClarified

college research paper - April 14, 2012 at 10:31am

I am always glad, because I have a chance to buy custom papers. This aided lots of times.

Reply · Like

Chino - March 11, 2012 at 5:29pm

You could certainly see your pstereixe within the paintings you write. The sector hopes for even more passionate writers like you who are not afraid to mention how they believe. Always follow your heart.

Julio - May 9, 2010 at 1:31pm

Hello, when I try to download the quickpwn is asking me for some sort of password and username. What should I put?

N - June 7, 2009 at 1:26am

I'm on the last step, where I have to wait for the reboot after it's all done. I've been waiting, and waaaaiting,.... still waiting. So really, how long do I need to wait for the phone to restart? Guesstimate? 2 hours, 3, 4?

Alexander - May 28, 2009 at 9:28am

So I just got a new MacBook 10.5.7 OS X. I have an unlocked iphone but I want to Jailbreak it. WHAT DO I HAVE TO DO?? All of these threads are confusing. Please help guys.

Ekramy - May 19, 2009 at 1:19am

Gina Cheong - May 13, 2009 at 3:58pm

Hi, Im currently using an iphone 2G v1.1.2 and im using the Turbo Sim too. Will this tutorial be suitable for me to directly jailbreak my iphone to v2.2.1? Do i have to remove the turbo sim + Sim card first b4 jailbreaking? Im using Mac 10.4.11. Any help will be greatly appreciated :) (im kinda of an IT noob here) THANKS! :)))

NPS - May 11, 2009 at 4:07am

There is no problem at all if you running it on MAC 10.5.5 Now if you running it on MAC 10.5.6 you got to fix USB port for iTune on DFU mode again, even you did it before, this time just re-install 315.4 pkg, then it is working OK. To find out how to fix USB port look down here: Fixing DFU mode on 10.5.6 As noted previously OS X 10.5.6 introduced a bug that affected the use of DFU mode. with some Macs. There have been previously published hacks and techniques to fix this, but here is another method that can be used to temporarily restore DFU functionality in order to use QuickPwn or PwnageTool. You will need an account with ADC (Apple Developer Connection) this is free and takes a few minutes to sign up, you should read the terms and conditions carefully and you should only sign up if you are thinking of developing applications in the future - http://developer.apple.com/mac/ Download the disk image IOUSBFamily-315.4-log.dmg for Mac OS X 10.5.5 Build 9F33 (yes, that is a 5 in 10.5.5 - this is a developer debug package of the USB kernel extension). Unplug non-vital USB equipment, such as external DVD writers, USB scanners, USB mass storage devices, at the most leave a Keyboard and Mouse connected. Install IOUSBFamily-315.4.1.pkg from within the disk image Reboot your system! Perform necessary DFU activity with QuickPwn or PwnageTool. Download the disk image IOUSBFamily-327.4.0-log.dmg for Mac OS X 10.5.6 Build 9G55 Intall IOUSBFamily-327.4.0.pkg from within the disk image Reboot your system! Reattach your USB peripherals.

sams - May 3, 2009 at 10:13am

Quickpwn didn't work, unknown error 2001....

qu1xs1lv3r - April 19, 2009 at 11:32am

i have a newly restored iphone to 2.2.1 after the pwnage tool screwed everything up (my phone had no signal after restart whatsoever).. so phone is clean.. trying to do a jailbreak with quickpwn.. 3x now.. it says successful but no cydia or installer after restarting.. this is not my first time to jailbreak..

Jack - April 3, 2009 at 9:01am

When I tried 2 open quickpwn a sign popped up and it said that I dnt hve the correct version of the .net framework. Any suggestions? Email me at jprez50599@aim.com

Hector Chavez - March 13, 2009 at 3:07pm

I can't get Quickpwn to stop running on my computer and on top of that my phone doesn't turn on or even connect to itunes so i an restore. please help me this is driving me crazy!!!

Stubakka - March 19, 2009 at 9:39pm

Having the same issue the phone wont turn on anymore... Some how i knew this would happen, if anyone knows how to fix this please let me know. Gabriel101@gmail.com

Michiel - April 8, 2009 at 10:35am

just press the home and power switch for about 10 seconds, and then the power switch only. Mine switched on again, nothing changed... but i do not get the quickpwn installed either. guess it has to do with OS version..?

geraldine - July 2, 2009 at 7:12pm

hector, did you find a solution!!! same exact thing happen to me, i am so pissed and desperate, wish didn't touched it at all!

jens smith - February 28, 2009 at 10:59pm

WORKED PERFECLTY. on MacBook Pro, OS 10.5.6, itunes 8, iphone 3G 8G followed instructions EXACTLY EXCEPT, i used a powered USB hub just in case.... any question please ask..i got my iphone yesterday, and it literally took me 7 mntues from start to finish... jens

gabe` - March 1, 2009 at 4:17am

i have an i phone 3g 16gb and i updated it to the new version and firmware 2.30 and now i am unable to unlcok it. Do you have any advise or do you know of a way to unlock it? I tried following the steps in the tutorial but no luck. Please help if you can in any way, Thanks, i can be reached at gabeholbura@yahoo.com

chris - March 19, 2009 at 12:10am

hi, got the iPhone 2.2.1, a macBook pro 15' running os 10.5.6. i've read i needed to install 'IOUSBFamily-315.4.1.pkg ' from the apple developer site in the latest iPhone sdk; which of course i cannot find it anywhere. (apparently without this program, i wont be able to get into DFU Mode) prior unstalling quickPwn. I AM LOST! pleas help! in advance, thank you, chris

Jesal - April 21, 2009 at 7:40pm

I also have macbook pro but i m not able to jailbreak my iphone. I have v2.2.1. I try it three time. I stop working from thirteen step. plz help me i want to jail break my iphone.

tony stephenson - May 11, 2009 at 1:23pm

Hi Jens I have a macbook 10.5.6 unable to jailbreak phone, tried downloading the file to make version 10.5.5 far too complicated for me couldn't get it to work at all, need a simpler way to do it, any suggestions would be greatful Tony

ahmoody84 - February 28, 2009 at 4:16pm

dear hi i made all the steps to the step 12 but before the ( Step Thirteen QuickPwn will now automatically begin sending information to your iPhone.) the QuikPwn take along time to start my iphone 3g & i tune give me a massage saying that itune couldn't open my iphone my itune is Version 8 and my phone is on the same version what i have to do ?????? pleas help

Abdul - March 4, 2009 at 10:09am

hi there , the same happened with me and my i phone isn't working anymore :( do you have any idea what to do ?? regards

rubble - March 9, 2009 at 8:22pm

The new OSX 10.5.6 update im sure you both have downloaded included a measure by apple to prevent OSX from recognizing your iPhone while in DFU mode, which explains the problem we're having. There is a patch to fix this floating around but the reviews have been mixed and many have reported their mouse/USB ports/keyboard no longer working after installing the patch.

brandon pelfrey - February 23, 2009 at 7:59pm

it worked perfectly the first time, although two days later i lost all music and itunes apps stop working, but after a quick restore from my backup it works flawlessly! But why would it do that?

Turkelicious - February 22, 2009 at 7:28am

Tried 10 times and still no luck. Although last step says ihaz. Success. don't do anything. I wait wait wait wait wait... you get the point. Itunes keep sating we detected ipnone in recovery mode you need to restore. Now what? Do something or still nothing?

Maurice - February 22, 2009 at 12:41pm

hit shift on keyboard and restore on Itunes. The firmware 2.2.1 that you download goes in blank space and hit open

DJ - May 22, 2009 at 10:43pm

I know this Q is from a few months ago, but i'm having the same problem...:(

ken - February 21, 2009 at 2:50pm

When I download "2.2.1 (2G): iPhone1,1_2.2.1_5H1_Restore.ipsw" for the 2G and put it in the Pwnage folder, it doesn't look like the cube on the site screen shots. It is a zip file... is that normal??? Thanks, Ken

Maurice - February 22, 2009 at 12:37pm

open the zip file and place it in Pwnage folder

diego Portalanza Peralta - April 10, 2009 at 10:05am

When i did that, i coulnt do it also, i aint see the cube, and they ask me for a password? have any idea which one was it?

Gina - May 13, 2009 at 4:49pm

Hey! ive got the same prob as u too! did u manage to resolve it? How should i unzip the file?

Merc Nuts - February 16, 2009 at 3:07pm

had to abandon this build. See all my issues above. All your phone favorites will be gone, and the "end call" button will be GONE BABY GONE. How to end a phone call with this build ? I surely dont know, I had to restart the phone. Thats a bit awkward and not what a paid to experience with my expensive primo iphone.

Merc Nuts - February 15, 2009 at 4:15pm

Wow - after checking out install: 1. phone favorites are gone 2. Phone button ( green ) missing letters c-a-l-l 3. make a test call - can't get to screen which has red end call button This is a problem ! I'm afraid to call anyone - how would I end the call 4. cyberduck or terminal or fugu all refuse to connect from my MBP laptop running 10.5.6 tony iPhone - using credentials root / dottie. I can however ping the device.... 5. figuring out the Installer 4.0 interface was difficult as it only seems to find search results occasionally - and the install button is only found if those search results do appear This has to be considered poor interface design ! 6. this tutorial changed my system font to look worse then before - no mention of how to change it back !

merc nuts - February 15, 2009 at 3:50am

installed fine but this tute should include all the instructions for getting the iPhone ready for action - so please consider including install of bsd subsystem, open ssh, and terminal. so far - I havent got bsd to work because the installer 4.0 app doesnt seem to show the "install" button per the tutorial. where is it ? my phone is connected to my home wifi network fine.

More Comments