Джейлбрейк (Jailbreak) IPhone 3GS 4.3.1 с помощью Пивняги (PwnageTool) для Mac

POST

MAIL

Posted May 6, 2011 at 3:06pm by iClarified

Шаг первый
Создйте папку "Pwnage" на рабочем столе. В нее вам надо будет скопировать несколько файлов, а именно - PwnageTool 4.3, можно скачать здесь: here или здесь here.

Вам так же понадобится прошивка 4.3.1:
4.3.1 (3GS): iPhone2,1_4.3.1_8G4_Restore.ipsw

Ее лучше загрузить через Firefox, т.к. Safari может разархивировать ее.

Джейлбрейк (Jailbreak) IPhone 3GS 4.3.1 с помощью Пивняги (PwnageTool) для Mac

Шаг второй
Дважды кликните на установочный файл PwnageTool затем перетащите иконку PwnageTool в созданную ранее папку.

Запкстите прорамму дважды кликнув по иконке PwnageTool.

Когда появится предупреждение кликаем ОК.

Шаг третий
Выбирте режим Эксперт на верхней панели панели

Шаг четвертый
Выбирите свое устройство. На выбранной картинке появится зеленая глочка. Чтобы продолжить кликаем синюю стрелку.

Шаг пятый
На следующей странице вы увидите - "Выберите прошивку". Нажмите на надпись Выберите прошивку.

В появившемся окне выбираем в нашей папке скаченную ранее прошивку и жмем Открыть.

Шаг шестой
В появившемся экране выбираем Настройки и кликаем синюю стрелку.

В Настройках вы можете включить Активацию телефона, Обновление модема (прошивки Baseband) до оригинальной версии, а так же настроить размер корневого отдела. Если у вас телефон не Офф, то ставим галочку Активировать телефон и затем кликаем синюю стрелку.

ВАЖНО*: Снимие галочку Активации если ваш IPhone официально разблокирован.

Настройка Cydia позволяет вам собрать свою кастомную прошивку, дабы в дальнейшем вам не пришлось все устанавливать в ручную.

Выбирите закладку Скачать приложения. Затем жмем Обновить и увидим все доступные приложения. Дважды нажав на любое приложения оно скачается и будет доступно в закладке Выбрать приложения.

Ставим галочку на те приложения, которые вы хотите установить в свою прошивку и жмем синюю стрелку.

Экран Индивидуальные пакеты отображает пакеты, которые вы хотите включить в прошивку. Здесь лучше оставить все как есть. Жмем синюю стрелку.

Шаг седьмой
Итак, все готово! Теперь можно создать прошивку - для этого выбираем Создать и затем кликаем Синюю стрелку чтобы начать процесс.

Шаг восьмой
В следующем экране указываем имя файла и выбираем папку куда программа сохранит вашу прошивку в формате .ipsw . Сохраните прошивку в созданную ранее папку на рабочем столе.

Теперь идет процесс создания прошивки. Прийдется подождать около 10 мин.

Вас попросят ввести пароль администратора. Вводим и жмемOK.

Шаг девятый
По окончании создания прошивки, присоедините телефон к компьютеру. После обнаружения телефон PwnageTool поможет вам перевести iPhone в режим DFU.

Удерживайте кнопку "Блокировки" и "Домой" в течении 10 секунд.

Затем отпустите кнопку "Блокировки" и продолжайте удерживать кнопку "Домой" еще 10 секунд.

Когда важ телефен успешно перейдет в режим DFU, PwnageTool попросит вас запустить iTunes.

Шаг десятый
В iTunes, зажимаем клавишу Alt/Option и жмем Восстановить.

Шаг одиннадцатый
Укажите папку Pwnage на рабочем столе в появившемся окне. Выбирете созданную прошивку и нажмите Выбрать.

Шаг двеннадцатый
iTunes восстановит прошивку вашего iPhone. Этот процесс так же займет минут 10. Когда восстановление закончится, на ваем телефоне будет iOS 4.3.1!

***Особое спасибо iPhone Dev-Team и I0n1c за их усердный труд по созданию этого джейла.

Follow iClarified

Mikey - December 1, 2012 at 10:53am

Followed this three times and no go. "this device is not elligable for requested rebuild?

Reply · Like

Brad - December 11, 2011 at 8:52pm

I have 3 iphones, all 3 are 3gs. 3gs FW 4.0 (NOT 4.0.1) bb 05.13.04 bl 6.4 model MC640 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC136 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w 3gs FW 4.0.1 bb 05.13.04 bl 6.4 model MC133 bootrom 359.3.2 (unfortunately) JB jailbreakme UL ultrasn0w I have tried updating to 4.3.3 doing the following: pwnage tool to create custom ipsw. Enter DFU, hold option, click restore, select custom ipsw, Extracting, verifying with apple.... then I get this message... "this device isnt eligible for the requested build" I have tried editing the hosts file, to no avail. My question is this. I want to upgrade all 3 phones to the most recent FW that is UNTETHERED JB, and must be unlockable as I use T-mobile. What FW do I use, and what steps do I need to take. I have updated, JB, and unlocked phones before, but never had the message stated above. My eyes are crossed from reading and searching, so I really need some help on this one. Thank you in advance for you help. It is greatly appreciated. I use a MAC OS X 10.6.8 iTunes 10.5

chelsea - November 19, 2011 at 12:43am

ive done this several times (with my iphone 3gs firmware 4.2.1) and each time itunes says firmware not compatible at the end. im so disappointed- ive been trying EVERYTHING... for WEEKS :( "i really dont wanna let it beat me like that wireless router did" -the office anyone?

seattlepunk - November 26, 2011 at 12:24am

Getting the same error: The iPhone "iPhone" could not be restored because firmware file is not compatible. Tried this with both Activate checked and then not-checked.

Rose - June 25, 2011 at 9:54am

My phone wasn't working right, so I restored it to factory settings. Then I went through all these steps, and when I select the custom firmware created by Pwnage tool, iTunes says the firmware file is not compatible? I tried doing it again and unchecking "Activate" but the same thing happens. Help?

Tang - June 23, 2011 at 1:52pm

When I click on the links to download the PwnageTool_4.3.3, one says page not found, the other one downloaded a .torrent format document, which I couldn't open. I've used PwnageTool before it wasn't like this before. Something amiss with the links? Thanks.

anoop - May 26, 2011 at 5:18am

Hi, I did all the steps mentioned above , when i went to restore my phone it says that the " iphone cannot be restored as the firmware file is not compatible " i have already updated to the official 4.3.3 and it is stuck in the activate screen ! kindly help me out on this . i am not able to restore to the custom firmware and jailbreak it . help is much appreciated guys ! ty

Qiz - May 25, 2011 at 6:48am

Hello, What size of the root partition should I use, minimum? Thanks in advance

Novaboyjp - May 25, 2011 at 2:53am

Hey, thanks! This worked brilliantly. Now running 4.3.3 on my 3Gs, kept old baseband of 5.13.04 Great work guys!!

Gorye - May 23, 2011 at 3:22am

Once I get to the "Browse for IPSW" step, early on, and select the restore bundle, I get a "wrong bundle selected" message and can go no further. THanks for your help in advance.

Tomas - May 16, 2011 at 4:07pm

I think Restoring bug is because cydia was in the folder when I did backup. Anyone has this problem please let me know. I

Tomas - May 16, 2011 at 4:01pm

It would be interesting to know if anyone has problem on restoring backup for iPhone 3Gs. I rund Restore after restoring to new iOS and my applications does not get restored from iTunes with all my saved data back to the phone. I tried 2 times already this and its failing. I hate this updates let me tell you all the I lose some thing when I do this.

Alain - June 8, 2011 at 6:18am

Yes, I have an issue. Not yours. Apps are back but datas gone. I think I failed to enter in DFU mode. maybe BaseBand, I can't guess if I have and old bootrom or a new one on my 3GS 4.3.3 never Jailbroken before, please iClarified, add a warning in the Tuto. people wrote another way to enter in DFU mode. iPhone shut down. Iphone connected to the Mac 10 s middle button 20 s middle and right button 30 s middle button But itunes ask for a connection to Apple servers and prompt there are errors.

tintin - May 14, 2011 at 2:44am

everything worked out pretty fine while i JB my 3Gs using 4.3.3 on my mac. the only problem was i have no carrier, my modem firmware is 05.16.02. please help!

Jonathan - May 15, 2011 at 6:46am

Go to cydia follow this tutorial: https://iclarified.com/4253

thelionsword - May 16, 2011 at 7:05pm

bb 5.16.xx isn't supported. If you're up to 4.3.3, you're probably going to have to bite the bullet and upgrade your baseband to 06.15.00. I ran into the same problem, the jailbreak was great, but couldn't get a carrier connection because of the baseband problem. The other thing is that the 06.15.00 is actually an iPad not an iPhone backdoor. Many people have lost their GPS as a result. So don't just dive into it willy nilly. What you want to do is unlock the carrier base band: http://jaxov.com/2011/03/how-to-upgrade-iphone-3gs-05-16-01-05-16-02-to-ipad-baseband-06-15-00/ http://jaxov.com/2011/05/how-to-unlock-iphone-3gs-baseband-05-16-01-05-16-02-on-ios-4-3-3/ If you want to jailbreak and preserve your original baseband: http://jaxov.com/2011/05/how-to-unlock-iphone-4-3gs-on-ios-4-3-3-using-ultrasn0w-1-2-3/ (or, you've probably already done it *above*)

jo-b - July 27, 2011 at 9:48am

I am on 4.2.1 with the 06.15.00 baseband. Actually I do not understand, if I could upgrade to 4.3.3 or 4.3.5 with a custom firmware, keeping my phone netlock free.

PHANTOM - May 13, 2011 at 2:50pm

Hey. I really need help from experts. I bought an Iphone 4 which was used on AT&T and now I want to use it with another carrier. It has 4.1.0 software and 2.10.04 version. The question is: Is it possible to unlock mi phone jailbreaking it to 4.3.3 using the custom file of this tutorial. Thank you very much in advance.

spc6 - May 12, 2011 at 11:41am

Hi, I used this method (pwnagetool-I have ultrasn0w and redsn0w is not compatible, or that is what I have heard, and custom IPSW) and it worked great on my 3gs, had 3.1.3, bb 5.12, updated to 4.3.3. I did update everything before I started, tiny umbrella, itunes, and used firefox (I have a mac) to download all files. I thought I had correctly updated my ultrasn0w (you must reboot by sliding switch or it is not updated) before starting but apparently had not so I lost my unlock. When I was all done I had a "no service", "no network" or 1 bar showing and could not connect to anything. I turned on wifi and connected to Cydia, downloaded ultrasn0w and my phone is great (knock on wood)!. During the above process I did get stuck on a couple of things, first when I went to put the phone in DFU mode I did not have it off so my computer opened itunes, I panicked and closed it and had to try the DFU mode again but the tutorial was great and gave me the option. Once I successfully had it in DFU mode (it tells you) I was prompted back to step 5, this is the first time I have tried this so I wasn't sure what to do, felt slightly panicky (I have read horror stories about some peoples experiences) but opened itunes on my own and everything from there out was textbook. I did get concerned when it seemed to me itunes asked twice about restoring , but once done my bb is still 5.12 and I am loving having the apps back that had updated to ios4 and above. Thanks so much to all that work so hard to make this happen! Hope this might help someone else...

Jaybot - May 11, 2011 at 3:31pm

Trying to update jailbroken/ unlocked 4.2.1 to 4.3.3 and am getting a "iphone is not eligible for the requested build". Iphone 3gs, bootrom 05:13:04. I've tried 4 times with the same result. Anyone out there have insight into this?

Mohan - May 12, 2011 at 1:55am

1. May be you haven't saved the SHSH and not running the Tinyumbrella ? 2. 5.13.04 can not run with 4.3.3 unless its custom firmware. 3. You should create custom firmware with pwnagetool4.3.3

Jaybot - May 12, 2011 at 2:27pm

Problem solved. I just redownloaded pwnage tool and 4.3.3 and I am now running 4.3.3 on t-mobile. Either my ios bundle was corrupted or I downloaded the wrong one like an idiot. Either way, hooray for ios 4.3.3! Now why didn't I think of that before?

Mohan - May 9, 2011 at 4:07am

I have a 3gs with old bootrom (unlockable baseband 5.13) and tried to update to 4.3.3 custom firmware with Pwnagetool and resore it, but after it completes its getting to recovery mode (connect to itune) but with 4.3.2 custom firmware its working fine, With 4.3.3 its getting nowhere... Help me find if there is any issues with 4.3.3 custom upgrade ..?

Iulian - May 9, 2011 at 11:44am

Have the same problem. Please help.

Mohan - May 9, 2011 at 1:13pm

I could figure out the problem . So the tinyumbrella needs to be updated to latest version. Even though I had updated the tinyumbrella that did not save the 4.3.3 shsh , so it was not getting restored. Once that saved the 4.3.3 shsh and tried restoring the custom firmware, that worked.

F92pola - May 3, 2011 at 5:39pm

Would be nice if every Jailbreak Tutorial as step 1 would have: "First do a backup in iTunes". I forgot to do just that, so after the (successful) jailbreak was finished - all gone. My bad, of course, but a little reminder wouldn't hurt.

jBoz - May 3, 2011 at 3:57pm

At the very end when I click "restore" there isn't a browsing interface that opens to let me choose my custom ipsw, it just restores to factory defaults. I'm completely sure that I've done everything else correct. Why is this?

hellinwtc - May 3, 2011 at 4:07pm

First you need to make sure you are in DFU mode and then open itune and there will be a pop up telling you that you are in DFU mode, if you don't have this pop up then you are not in DFU mode. After that if you are using Mac then you need to hold the Option key(for window hold Shift key) and click on restore so in that way you could be able to select you custom ipsw.

Raff - May 3, 2011 at 11:00am

Not worky for 3GS, the JB will works but no network connection!

jeibi - May 1, 2011 at 10:42am

will this retain the baseband of the 3gs phone? thanks!

More Comments