Comment "Jailbreak" votre iPhone 3GS sous OS 3.0 avec RedSn0w (Mac)

POST

MAIL

Posted July 7, 2009 at 1:25pm by iClarified

Voici la méthode à suivre pour "jailbreak" votre iPhone 3GS sous OS 3.0 avec RedSn0w pour Mac. La version Windows de ce tutorial est ici. La version pour iPhone 3G de ce tutorial est ici. La version pour iPhone 2G de ce tutorial est ici

Ce procédé permet notamment de "jailbreak" votre téléphone pour ensuite utiliser l'application UltraSn0w permettant un désimlockage logiciel de votre téléphone. Vous trouverez le tutorial permettant le désimlockage ici .

Étape 1
Créez sur votre bureau un dossier que vous appelez Pwnage

Téléchargez RedSn0w depuis ici et placez l'application dans le dossier Pwnage. De même, téléchargez le firmware 3.0 depuis le lien suivant et placez le dans le même dossier.

3.0.0 (3GS): iPhone2,1_3.0_7A341_Restore.ipsw

Décompressez le fichier .zip de Redsn0w dans le dossier Pwnage

Comment "Jailbreak" votre iPhone 3GS sous OS 3.0 avec RedSn0w (Mac)

Étape 2
Connectez votre iPhone à votre ordinateur et lancez iTunes.

Selectionnez votre iPhone dans la liste des appareils connectés à iTunes. Maintenez enfoncé la touche alt/Option et cliquez sur le bouton Restaurer. Une restauration est préférable parce que moins gourmande en espace mémoire du iPhone.

Naviguez jusqu'au dossier Pwnage sur votre bureau et sélectionnez le fichier ipsw du firmware 3.0. Cliquez sur le bouton Ouvrir pour continuer.

*Note: Si votre téléphone est déjà au firmware 3.0 et que vous souhaitez simplement le "jailbreack", sautez cette étape.

Étape 3
Lorsque iTunes la mise à jour de votre iPhone au firmware 3.0, lancez redsnw0w.app depuis le dossier Pwnage sur votre bureau.

Étape 4
Lorsque RedSn0w s'ouvre cliquez sur le bouton Browse

Étape 5
Allez jusqu'au le bundle du firmware que nous avons préalablement rangé dans le dossier Pwnage sur votre bureau et cliquez Open

Étape 6
Lorsque le firmware a été vérifié cliquez le bouton Next pour continuer.

Étape 7
Assurez-vous d'avoir bien sélectionné Cydia et cliquez sur le bouton Next.

Étape 8
RedSn0w va maintenant vous indiquer comment mettre votre iPhone en mode recovery. Déconnectez votre iPhone 3GS de l'ordinateur et éteignez-le (OFF). Une fois le téléphone éteint, maintenez enfoncé le bouton Home en reconnectant votre iPhone à l'ordinateur. Ne relachez pas le bouton avant que RedSn0w détecte le iPhone et commence l'installation.

Étape 9
Votre téléphone va maintenant redémarrer.

Étape 10
RedSn0w va maintenant se charger de la mise à jour des RAM Disk et kernel.

Étape 11
RedSn0w vous prévient lorsque l'opération est terminée. Cliquez le bouton Finish. Votre iPhone redémarre (5 minutes environ) et est dorénavant "jailbreak" avec Cydia sur le SpringBoard.

Follow iClarified

Olivia - January 18, 2010 at 1:55am

I've tried this three times but, after I finish each time the screen on my iphone goes black and won't respond so then I have to restore it using iTunes and Cydia is never there. Why won't it work?

Reply · Like

Paul R - October 17, 2009 at 1:45pm

Who ever can help me: Can i jail brake my Iphone 3G (3.0) using this tutorial which says that is made for iphone 3GS????? please if anyone can help, i will really appreciate it.

Pedro - October 21, 2009 at 11:25am

dude, there's a tutorial very similar to that in this site. and it's for the iphone 3g. i did it in mine, and it worked perfectly. glad if i helped.

taraya mccord - October 13, 2009 at 9:49pm

how can i restore the older firmware 3.0.1 from 3.1.2 without using itunes because that doesnt allow me to do it

Josh - October 13, 2009 at 9:52pm

unfortunately you are unable to at the moment, I believe. you upgraded too soon :(

4you - October 5, 2009 at 4:14pm

how can jailbreake my iphone 3gs version 3.1 i try many times whit this tutorial but says unable to recognize specified IPSW, i'm using redsn0w 0.8 and firmware iphone2,1_3.0.1_7A400 any help please

Jay - October 3, 2009 at 3:36pm

I did I jailbreak and unlock my iphone 3g using this(and another about unlock) great tutorial!!!! My iphone works perfect!!! Thank you very much!!!!!!

scared - December 17, 2009 at 10:59am

i'm waiting for it to reboot and its taking forever! I'm so scared it'll be locked or something! HELP~

joe - October 3, 2009 at 2:10am

the firmware for 3gs is a bunch of files how to i get it to look like the box ipsw

decarvalhod - September 30, 2009 at 3:03pm

I just got my iphone 3GS and it came with 3.0.1 FW. I want to Jailbreak and unlock it however I have a doubt. I have a mac and I know I should use RedSn0w, the only doubt I have is regarding if I should just go ahed open RedSn0w and select the 3.0.1 firmware (I already downloaded) and follow the steps or should I restore to 3.0 FW and then open RedSn0w an select 3.0.1 firmware? Thanks for all the help!

flowctrl - October 2, 2009 at 3:59pm

The comment in the article: ** If you would like to jailbreak on the 3.0.1 firmware you can follow these exact instructions; however, in Step Two restore using this 3.0.1 iPhone firmware file instead of the 3.0 one. Continue with the instructions as indicated.** Is not true. redsn0w only works with the 3.0 firmware. If you select the 3.1 firmware with it, it will say "Unable to recognize specified IPSW". So it appears that the only solution is to downgrade to 3.0. To make matters worse, iTunes no longer allows restoring to an IPSW of a version less than 3.1. So to downgrade or even install a new IPSW, you'll have to downgrade iTunes if you're using the latest version. I *assume* that downgrading iTunes will let you install older IPSWs, but I didn't test that myself. I'm hoping that the DevTeam releases a new redsn0w soon that accepts the 3.0.1 firmware.

Pedro - October 23, 2009 at 9:36am

I was just trying to downgrade mine 3gs from 3.0.1 to 3.0 with itunes 8.2 and failed. itunes won't let us do the downgrade.

36chambers - September 29, 2009 at 11:01pm

wow, cant say that uve made it easier enough!! ive had troubles in the past with this following alll the other guides on the net and i got a new iphone 2day, luckly enough i came over your guide! no problems what so ever done in minutes first go... thank you very much!!!!!

DAX - September 27, 2009 at 11:16pm

For the people having problems unlocking their 3G w/ 3.0.1, I tried following the instructions with no luck, so I downgraded from 3.0.1 to 3.0 and the it all worked perfectly JB and unlock! good luck

DAX - September 27, 2009 at 11:08pm

Hey rebecca, I have teh 3G w/ 3.0.1. so I had no trouble jailbreacking the iPhone, but could not unlock it...I think I followed the exact instructions, but still no luck, so I had the phone downgraded from 3.0.1 to 3.0, and jailbroken again and finally unlocked, and now it works fine..... so you have to downgrade it to 3.0 firmware... cheeers.

DAX - September 20, 2009 at 11:29pm

iPhone 3G on 3.0.1 I'm stuck in step 2. I've downloaded the A400 restore Ispw gile. I/\'ve resyored my Iphone via iTunes and have the 3.0.1 with 04.26.08 band. How do we use the A400 file in the second step, it says to open it, while the iTunes is restoring the phone, will the iPhone use this file from my computer to restore? On steps 3 and 5 it indicates to select the A341 restore file, do we, 3G 3.0.1 users, use this A341 files or select the A400 file on these steps??? Sorry but I need help///////

PIckerman - September 20, 2009 at 6:21am

Hey, I've got a 3GS 16Gb, bought outright from apple. It was on 3.0.1 when I bought it. I was successfully able to jailbreak it using redsn0w, without the need to restore in itunes 9 (it wouldn't let me restore to 3.0.1 anyways). The jailbreak works like a charm, with cydia and icy installed and all, but the battery life is a nightmare now!! It goes from full charge to power-off in less than 7 hours on standy!! The iPhone is also constantly heated as if it was processing something... (3G, wifi and bluetooth are all off) Any idea or similar cases? Your thoughts are most appreciated, as it's impossible to leave the house now that my battery dies on me every couple of hours :) Cheers.

DAX - September 20, 2009 at 11:34pm

Hi Pickerman, maybe you could help me.....please see my comment right obove yours, cheers.

user - September 26, 2009 at 8:38am

go to settings click on mail then turn off fetch new data , u will be fine for sure

matt - September 29, 2009 at 11:40pm

I have the same problem. Talking to a "pro" TOMORROW AT 5.00 EST.. WILL KEEP YOU POSTED - PLEASE LET ME KNOW IF YOU FIND A WAY- Apparently the way to do it is redirect the itunes apple responce to auriks server! good luck ( we have the exact same problem!)

sanoj2sanoj - September 17, 2009 at 1:14am

when i try to restore iphone 3g 32 gb ,that showing a message in itunes the device isnt eligible for the requested build

tunin - September 17, 2009 at 10:59am

Same here. I have read that since the release of the 3.1 fw one can not do the restore to anything except 3.1?? Not sure if this is true or not?

flowctrl - September 30, 2009 at 3:27am

It's true. Apple has effectively disallowed using iTunes to restore any firmware except 3.1. A solution may be to downgrade iTunes to 8.2, which is available here: http://www.ihackintosh.com/2009/06/download-all-versions-of-itunes-for-windows-mac/ I haven't tried that. Back up your music folder if you do.

michael tran - October 23, 2009 at 2:50am

hello! i have program like this when i try to restore firmware 3.0 on 3gs .i don`t known why? so i restore firmware 3.1 should be o.k but can`t jairbroken ? can you send back mail? goldenbuddhaveggie@sbcglobal.net

Matthew Chung - September 16, 2009 at 9:07am

Hi, so i got through every step fairly easily. But my iphone wouldnt reboot itself after i had clicked finish. I waited over an hour, and it still hadn't rebooted with cydia. So i restarted my phone, and it was functioning properly, except without cydia. Why doesnt it reboot more quickly? or am i doing something wrong..

morphos - September 15, 2009 at 6:59pm

Hi to the Dev. Team from Augsburg, Germany Many thanks for your tutorial and instructions. Just jailbreaked my new iPhone 3GS and unlocked it (bought in the US). SIM from non tied operator in Germany just works fine. I am glad I do not need to use Deutsche Telekom and I am happy with good plan of BASE (eplus) which provides Internet Flat Rate for just 10 / month. Keep on helping the free world of Telco users.

Luis G - September 7, 2009 at 11:13pm

I have all the downloads and almost in the final of the step two(watching the bar in the iphone), the itunes displays that the iphone will be restored with the original form. I tried tw times and itunes diplay the same thing What can I do? Its an iphone 3gs with the version 3.0.1 (7A400) It's recognize the firmware "iPhone 2,1_3.0.1_7A400_Restore" and start the process but did no t finish this second step. Someone can help me to fix it? Thank you in advance

WAMBO - September 10, 2009 at 12:28pm

choose the 3.0 FW for redsnow, not the 3.0.1 [which is what you are choosing], even though the phone is updated to 3.0.1. Redsn0w need the 3.0 FW

Luis G - September 11, 2009 at 6:40pm

Thank you. I tried with the 3.0FW for redSn0w and the itunes displays before finish the restore : "..this device isn't eligible for the requested build"

Josh - September 7, 2009 at 3:47pm

i have a 3gs on 3.0.1, downloaded the 3.0 firware and restored, but i still get the error in redsn0w- "unable to recognize specified ipsw." i downloaded in firefox and it is a .ipsw file. any ideas? thanks.

Benji - September 6, 2009 at 3:41pm

My 3GS has not been activated yet, hence when I connect to ITunes it asks to install the original sim. I cannot therefore get past step 2. What can I do?

casper - September 6, 2009 at 2:05am

I'm stuck on step four. I browse to "iPhone2,1_3.0.1_7A400_Restore.ipsw" and open it. Then redsn0w says "Unable to recognize specified IPSW" What can be wrong? Thanks in advance.

Barel - September 8, 2009 at 2:27pm

You should use 3.0 firmware. 3.0.1 is needed only in step TWO. Just done it with my iPhone 3GS and worked great. As noted in 3rd paragraph: ** If you would like to jailbreak on the 3.0.1 firmware you can follow THESE EXACT INSTRUCTIONS; however, in Step Two (AND ONLY IN STEP TWO) restore using this 3.0.1 iPhone firmware file instead of the 3.0 one. Continue with the instructions as indicated.**

Casper - September 8, 2009 at 8:10pm

Thanks. It works :)

Alex - August 30, 2009 at 10:06am

I'm stuck at step 1 or 2 where you restore in iTunes by pressing Option then clicking on Restore. I selected the downloaded firmware but I'm getting an error message that says "blah blah blah because Firmware is not Compatible" Please help

Alex - August 30, 2009 at 10:08am

by the way I currently have an iPhone 3GS with FW 3.0.1 and I had it jailbroken and unlocked somewhere. I just wanna jailbreak and unlock it again because there are issues with the battery, it gets depleted quite quickly so I want to do it all over again.

More Comments