Comment réaliser un jailbreak untethered de votre Iphone 4 (Windows) [5.0.1]

POST

MAIL

Posted December 27, 2011 at 11:47am by iClarified

Voici les instructions pour faire un jailbreak untethered de votre iPhone 4 en 5.0.1 en utilisant RedSn0w pour Windows, le tutoriel pour la version Mac se trouve ici..

Cette procédure entrainera la mise à jour de votre baseband, annulant vos chance de desimlockage. Suivez ce tutoriel sur comment mettre à jour vers iOS 5.0.1 en utilisant un ipsw customisé si vous avez besoin de desimlocker.

Si vous voulez jailbreaker un firmware moins récent vous pouvez trouver le tutoriel approprié ici.

Etape 1
Créez une dossier Pwnage sur votre bureau.

Téléchargez la dernière version de RedSn0w ici et placez-là dans le dossier Pwnage. De la même façon, téléchargez le firmware 5.0.1 ici et placez-le dans le dossier Pwnage. (Note: vous n'avez pas besoin de télécharger le firmware 5.0.1 si vous êtes déjà en 5.0.1)

Extraire l'archive RedSn0w zip en double cliquant dessus.

Comment réaliser un jailbreak untethered de votre Iphone 4 (Windows) [5.0.1]

Etape 2: (Vous pouvez passer cette étape si vous avez déjà installé le firmware 5.0.1 sur votre appareil.)
Connectez votre iPhone à votre ordinateur et lancez iTunes

Choisissez votre iPhone dans la liste des appareils sur la gauche. Maintenant, en maintenant la touche Shift (maj) enfoncée, cliquez sur le bouton Restaurer. Une restauration est préférable car elle laissera le maximum d'espace disponible sur votre iPhone.

Naviguer jusqu'au dossier Pwnage sur votre bureau et choisissez le firmware 5.0 ipsw. Cliquez sur le bouton Choisir pour continuer.

iTunes va mettre à jour votre iPhone avec le nouveau firmware.

Etape 3
Démarrez l'application redsn0w depuis le dossier redsn0w que nous avons extrait précédemment.

**Les utilisateurs de Windows 7 pourraient avoir besoin d'éxécuter redsn0w en mode administrateur et compatibilité Vista.
Vous pouvez faire cela en utilisant un clic droit sur l'exécutable et en choisissant Propriétés dans le menu contextuel.

Etape 4
Une fois que RedSnOw s'ouvre cliquez sur le bouton Jailbreak.

Etape 5
Branchez votre iPhone sur votre ordinateur et assurez-vous qu'il est éteint (OFF) puis cliquez sur le bouton Next

Etape 6
RedSn0w va maintenant vous guider au travers des étapes nécessaires au passage en mode DFU. Vous pouvez trouver plus d'aid sur le mode DFU ici

Pressez les deux boutons Home et Power pendant 10 secondes.

Relâchez uniquement le bouton Power et continuez à appuyer sur le bouton Home jusqu'à ce que RedSn0w détecte l'appareil.

Etape 7

Votre iPhone va maintenant rebooter.

Etape 8
RedSn0w va maintenant préparer les données pour le jailbreak.

Etape 9

Sélectionnez Cydia dans la liste des options et cliquez sur Next.

Etape 10
Votre iPhone va maintenant encore rebooter et RedSn0w va commencer à téléverser le nouveau RAM Disk et le noyau.

Etape 11
Une fois que tout cela est terminé, vous serez averti que RedSn0w a terminé. Quand votre iPhone a fini de rebooter (5 minutes environ) il sera jailbreaké et Cydia sera installé sur le springboard.

*Comme d'habitude, un grand merci à l'iPhone Dev-Team, Pod2g et Geohot pour leur dur travail et leur contribution à la communauté iPhone.

Follow iClarified

raja.asad - March 30, 2013 at 2:16pm

I have installed tinnyumbrella but an error is displaying "tinyumbrella's TSS server is not running"... pls tel me how to fix it ???

Reply · Like

raja.asad - March 30, 2013 at 1:41pm

how can I unlock my iphone 4s as factory unlock???

raja.asad - February 17, 2013 at 2:20pm

I have iphone 4 , t-mobile, how can i unlock ???

orlando torres - April 4, 2012 at 12:50am

jailbreake

ahmed - March 13, 2012 at 7:07pm

plz help me with this i jail-broke my ( iphone 4 - factory unlocked ) successfully some cydia tweaks doesn't working ... that's ok i already knew it before but i realized a drain in my battery life so i tried to get back yo the stock ios 5.0.1 by making a clean restor with iTunes but a had a complete failure with such a stupid errors such as: 3194 ... 21....1601....1603 till now i tried to edit my host file ... tinyumbrella .... iREB.... redsnow........any many suggestions i found it on the internet with no result still stuck on 5.0.1 any ideas !!!!!!!!

Tubagznyven - March 14, 2012 at 9:07am

Just googling man

Ahmed Siam - March 14, 2012 at 11:13am

i did man more than 12 hours without any result yet i even tried this from a different pc has no apple software before

Ahmed Siam - March 19, 2012 at 10:59am

still can't restore back to the stock firmware any idea ????

WALID78 - February 26, 2012 at 8:49am

How to Perform an Untethered Jailbreak of Your iPhone 4 (Windows) [5.0.1]

david - February 19, 2012 at 9:33pm

Hey, Anytime i try to run this is crashes at the end of stage one, I did get it completely done once before so i know it's the right one. But i had to restore and lost the jailbreak,.. But anytime i try it now it crashes at the end of stage one.. then i've to run a back up to get my phone working again as it's a blank screen and will not turn off./ or on.

music3000 - February 14, 2012 at 1:41pm

I am going to upgrade iPhone 4 (GSM) currently running iOS 4.3.3 (jailbroke) with modem firmware 4.10.01. I don't need to unlock. Can I simply Restore in iTunes or do I need to Shift+Restore using the firmware found on this site?

Tubagznyven - March 14, 2012 at 9:06am

Shift restore

yayako - February 1, 2012 at 3:10pm

Hi all, i had an iphone 4 baseband: 2.10.04, Itune v 10.5.2. I'd like to upgrade 5.0.1 and follow this tutorial by; downloaded redsn0w_win_0.9.10b3 and iPhone3_3_5.0.1_9A405_Restore.ipsw. Then i had problem with the first step when i try to "restore iPhone3_3_5.0.1_9A405_Restore.ipsw" with Itune, it's said "this firmware is not compatible". Could anyone help me to solve this out? Appreciate for the next reply.

Amine - February 2, 2012 at 12:16pm

Hi, Check if your i phone is CDMA or GSM. You have to download the correct version of the the fimware according to this.

yayako - February 2, 2012 at 5:09pm

the firmware that i download is for GSM, which is suitable for mind. Please recommend for the right one. I will appreciate for your next reply.

Amine - February 3, 2012 at 7:18pm

Hi, I think that you had download the cdma firmware (according to your first post). You can download the GSM firmware in the link below: http://appldnld.apple.com/iPhone4/041-3309.20111109.64rtg/iPhone3,1_5.0.1_9A405_Restore.ipsw

ahmed - March 13, 2012 at 6:51pm

see on back of your i device model A1332 so that should be a gsm if not it'll be CDMA

Yayako - March 14, 2012 at 5:57am

Thanks for all reply now i had update min successfully.

debbie - November 13, 2012 at 9:47pm

how do you find out it your iphone is cdms or gms ?? help pls think thats why am no getting to jailbreak my fone :( been tryn for days now lol

Amine - January 24, 2012 at 7:11pm

I have I Phone 4 ios 4.3.5 witch I have update to ios 5.0.1. After jail break with redsn0w 0.9.10b4 it can't reboot, I just have the logo blinking. please help (I successfully restore with itune but can't jailbreak)!!!!

racer1698 - January 21, 2012 at 8:16am

after i jb my iphone 4, open cydia and try to search apps, it will get out of cydia and back to the main screen, when i try the " aout " button, it go back to main screeen also. what is the problem. anyone can help? it also happen when i try to add a new source

Bruce - January 20, 2012 at 9:56pm

everytime i download redsnow and try to open it keeps telling me application not found, what am i doing wrong

john - January 11, 2012 at 12:27am

i have an iphone 4 cdma verizon and i upgraded it to the ios 5.0.1 and now im trying to use redsn0w and every time i do it, it gives me a pop-up saying that i have to close redsn0w.exe. also when i try changing the capability but my windows xp doesnt have the option for "service pack 3 or 2" ive ran it as administrator and still when i try to jailbreak it, it doesnt work.

pavan - January 10, 2012 at 6:03pm

jail breaking with 5.0.1 everything gone very smooth, but Bluetooth is not working for me. my iPhone 4 is keep searching for devices all the time. my car is able to identify the phone, but phone is not identifying it

Zeb - February 3, 2012 at 4:51pm

Which Firmware did you use to JB your iPhone 4 5.0.1? Thanks!

pavan - February 3, 2012 at 7:09pm

yes, it is 5.0.1

T4tanvir - January 10, 2012 at 10:18am

Hi guys, how can i enable push notifications? I m on ios 5.0.1 untethered

Abhishek - March 14, 2012 at 10:47am

Hi, Follow these steps as it is... You will enjoy push notifications on your phone. http://www.addictivetips.com/mobile/fix-imessage-facetime-push-notifications-on-hacktivated-iphone-4-3gs/

Zeeshan - January 10, 2012 at 9:13am

I am using currently IOS 4.3.5 tethered on iPhone 4. I want to upgrade with 5.0.1 untethered version. I am following the steps given in this tutorial. When I am trying to restore my iPhone to the ipsw firmware provided here, i received an error 3194. I tried many times but the same error appears. I am using the latest version of iTunes 10.5.2 . Please help me in this issue.

Tubagznyven - January 10, 2012 at 10:08am

Just search on google error 3194 n choose 1st link,i think from that link is clear enough Hope thats help

t4tanvir - January 6, 2012 at 12:24pm

can anyone pls tell me how to make push notifications active on jailbroken ios 5.0.1, it does not work on mine though everything is on

itaco90 - January 5, 2012 at 4:16pm

my computer dosent seemto read when the phone is on dfu mode im sure im doing it right but then nothing happens it tells me to look on google or youtube to find out how to put my phone on dfu mode any suggestions???

tubagznyven - January 10, 2012 at 10:11am

If u think it's right,just try again then maybe your timing for entering dfu mode just incorrect

Coose - January 28, 2012 at 6:02pm

Same for me. It does go to DFU, but the PC needs to re-identify the USB device. wait for windows to finish and then do a back, next. Redsn0w will see the DFU mode and do its thing

Tubagznyven - January 5, 2012 at 7:39am

Of course u can't,coz this jb for iphone 4

lucky005 - January 4, 2012 at 11:23am

I have successfully jailbreaked my iphone 4 with baseband 4.11.08 but when i cut my sim and place it in the phone it shows no service please help me.

More Comments