El iPhone Dev-Team saca el Jailbreak Untethered para iOS 4.3.1

POST

MAIL

Posted April 4, 2011 at 4:48am by iClarified

The iPhone Dev-Team has released an untethered jailbreak for iOS 4.3.1. The jailbreak implements the untether developed by i0n1c.
El iPhone Dev-Team ha sacado un jailbreak untethered para iOS 4.3.1. El Jailbreak implementa el untether desarrollado por i0n1c.

El exploit untether para la versión 4.3.1 viene por cortesía de Stefan Esse(@i0n1c en twitter), un investigador de seguridad asentado en Alemania. Stefan tiene un largo historial de investigación de vulnerabilidades, e ironicamente su primera contribución a la comunidad Jailbreak de iPhone fue mejorar su seguridad — el año pasado le dió un repaso a Apple e implemento ASLR para los iPhone con Jailbreak con su estructura "antid0te". Estamos contentos de ver que Stefan haya puesto atención a un exploit para el Jailbreak Untether.

Los dispositivos soportados son el iPhone 4, iPhone 3GS, iPod Touch 4G, iPod Touch 3G, iPad 1 y Apple TV 2. El iPad2 todavía no es soportado.

Puede descargar Redsn0w o PwnageTool para realizar el Jailbreak. Estos son los enlaces de descarga:
● RedSn0w (Windows, Mac)
● PwnageTool (Mac)

En muy poco tiempo, publicaremos más tutoriales sobre cómo realizar el Jailbreak.

Tutoriales RedSn0w:
● iPhone 4 (Windows, Mac)
● iPhone 3GS (Windows, Mac)
● iPod Touch 4G (Windows, Mac)
● iPod Touch 3G (Windows, Mac)
● iPad 1 (Windows, Mac)

Tutoriales PwnageTool:
● iPhone 4 (Mac)
● iPhone 3GS (Mac)

IMPORTANTE:
Los usuarios de Ultrasn0w no deben actualizar todavía. El iPhone Dev-Team aún tiene que sacar una actualización de Ultrasn0w que funcione en el firmware 4.3.1.

Necesitamos primero sacar una actualización de Ultrasn0w que soluciones algunas imcompatibilidades cuando se usa el firmware 4.3.1 en basebands antiguas compatibles por Ultrasn0w. Y recuerde que, una vez que solucionemos Ultrasn0w para 4.3.1 (Lo anunciaremos aquí y en twitter), sólo debe obtenerlo a través de un IPSW personalizado con PwnageTool, Sn0wbreeze o xpwn!
Nunca intente restaurar o actualizar con un firmware oficial porque perderá el Unlock.

Follow iClarified

cokifive - April 7, 2011 at 4:51am

hi guys, i have iphone 3 with os 4.2.1 bb 06.15.00... i used redsn0w before and update to 06.15.00 to unlock my phone. If i upgrade to os 4.3.1 and JB with new redsn0w. does it mean i will lose my carrier unlock?? do i have to do everything all over again (mean JB & unlock)> Thanks in advance

Reply · Like

moe - April 6, 2011 at 10:50pm

how long is the restore suppose to take is been restoring for the past 30 mins, can someone help please

Ahmed Irushad - April 6, 2011 at 5:22pm

dev team, can you please release an unlock for iphone 4 ( baseband 02.10.04 & up ) i am waiting for that almost a year, and many more are still waiting for that, i know you guys can do it, i appreciate your work & i am grateful for that...

Steve J - April 6, 2011 at 3:49pm

hei dev team - who needs the jailbreak if 2/3 of iphone 4's are locked in some pointless network.

Chrystal - April 6, 2011 at 1:50pm

Hi There, I'm using redsnow to jailbreak my ipod touch 3g, I followed all the steps, but it always stop at the "uploading ramdisk" step, then the downloading jailbreak data disappears the ipod reboots and still isn't jailbroken while on my pc it is still uploading the ramdisk. Am I doing something wrong?

Wazza - April 6, 2011 at 1:47pm

Hi there, If I toggle the vibrate switch to silent mode, the iPhone is supposed to vibrate as we all know. However, since Jailbreaking, it doesn't always vibrate, and sometimes vibrates when I switch it back to the normal position, when it shouldn't. I restored the phone to pre-jailbreak and it works fine so its definitely a software related issue. Has anyone else noticed this? What could be causing it? Everything else works fine. Thanks in advance.

Tomster88 - April 6, 2011 at 5:09pm

I noticed that too. I have the same issue. I also notice this jailbreak, or maybe it's 4.3.1, is making my phone sluggish.. have you noticed anything like that too?

DAJ721 - May 12, 2011 at 8:54pm

I have the same issue... What can I do?

Martin - April 6, 2011 at 12:09pm

Does this work on the iPhone 3G? (Says only 3Gs in the title)

Noise - April 6, 2011 at 12:36pm

It doesn't. 4.3 and 4.3.1 do don't support iPhone 3, only iPhone 3GS and iPhone 4.

Monty09 - April 6, 2011 at 7:41am

jailbreak went perfect on ipod touch 4th gen however once in cydia and i was adding everything i always add i randomly got a white flash then it went to apple logo with loading bar but my screen with cydia was underneath...? and it let me keep using cydia so i exited and resprung the winterboard and it went a way.... just thought it was really weird. but thansk to the devs!

Mi Bear - April 6, 2011 at 6:40am

I did the redsn0w/jailbreak on a iPhone 4.the jailbreak went flawlessly.I got Cydia And Internet.bb is -04.10.01 The problem is > it's not connecting to AT&T says searching or only one bar .doesn't say AT&T near the signal. Took the sim out and put it in a 3G s and worked fine.did the jb on both win 7 and xp two different laptops.tried running it as admin.slid the airplane mode off and on.IDid numerous other things. Pulling my last hair out (ouch!)any help would be appreciated.thanks!

Ynot - April 6, 2011 at 3:46am

I also would like to thank the dev team for saving us from the restricted world of Apple :) Can you please write some info on the ipad2 jailbreak? if there is a timeline or hope for it thanks

Z!GGY - April 6, 2011 at 1:58am

again the prob with the incoming international calls no name shown with missing the 0 from the start anyway good job dev

Macki - April 5, 2011 at 5:48pm

Thank You dev team for this! and of course i0n1c :) Without the jailbreaks I would never buy the Apple products, It's like the missing part:) Im still wondering why we are not getting any information on the IPad 2 jailbreak? Is Comex going to release the IPad 2 4.3 jailbreak, it couldn't be too hard for him just to twitter saying if he will, and if it's coming soon or something like that :/

Maxi - April 5, 2011 at 8:05am

Work for 3.10.01? thank's.

coolio - April 5, 2011 at 5:42am

I had some troubles with Redsn0w jailbreaking.. so had to use the pwnage tool to make custom IPSW. But now my 3GS is up and running perfectly.. thanks dev-Team and everyone behind it.

Jay - April 5, 2011 at 12:53am

So does this mean the unlock is right around the corner for 4.3?

Rez - April 4, 2011 at 11:28pm

Just jailbroken my 3GS with new redsnow, I lost my network and Internet , any help

Steve - April 4, 2011 at 11:49pm

Me 2 , 3GS, no phone number shows in General settings,, Carrier softbank, cannot send SMS ,

Rez - April 5, 2011 at 12:29am

I couldn't access my setting menu either, tried online for a solution with no luck so I had to restore my iPhone and forget about jailbreak.

Joe N - April 5, 2011 at 12:41am

Just JB my iphone 4 and lost Network as well. Bars are at 1. Any info?

ss ss - April 5, 2011 at 12:47am

YEah mine is the same bars at 1 always. No Carrier, phone number, no sms on 3gs

Joe N - April 5, 2011 at 2:51pm

So what I basically did was restore the phone back to 4.3.1 (Itunes/Tiny) and re-jailbroke it with Redsnow. Everything works perfectly now. I get my carrier back, I can make calls, sends SMS/MMS and so on. The only "bug" that I notice is that the reception bars remain @ 1. I've noticed it doesn't affect reception what so ever, just more of a "bug" that displays 1 bar.

Zeljko - April 5, 2011 at 5:33pm

that could be mine comment 2. cheers.

rudolf - April 6, 2011 at 9:56am

Restored to 4.3.1 via iTunes using TinyUmbrella to keep my baseband at 01.59.00 and then JB it using Redsn0w (repeated the whole procedure twice). Signal bar shows one bar or at times no bars at all. Turning OFF an On airplane mode, 3G and Cellular settings did not help. I did not install Ultrasn0w. I keep my baseband at 01.59.00 just in case I travel abroad and want to use my cell with different carrier.

Dogter - April 4, 2011 at 11:10pm

Just updated both my iPad 1 and iPhone 3Gs to iOS 4.3.1 and jailbroke with the info provided. So far no issues Since my phone was out of space it would not let me update my OS. Even Cydia would not let me update Cydia APPs due to lack of space. I had to do a restore install of iOS 4.3.1 and reinstall all of my APPs, settings, music, photos, ex. Doing a complete restore ended up freeing about 3 gigs of space

Dogter - April 4, 2011 at 11:12pm

I meant 2 gigs, not 3. Typing in the dark so I hit the wrong key. After restoring and doing a clean install 4.3.1, the JB went through with no issues

Carlos de Carvalho - April 4, 2011 at 10:01pm

Amazing !!!!!!!! Thanks a lot !!!! Looking foward for the ipad 2 version, any news !?!?!

Sam - April 4, 2011 at 10:20pm

It's out now!!! Just JB'd mine and it's sooo much better....or was it a dream?

Carlos de Carvalho - April 4, 2011 at 10:42pm

HOW !!!!!!!!!!!!?????????

rok - April 4, 2011 at 8:24pm

works fine thanks

iNo3L - April 4, 2011 at 3:43pm

Wanna say Thank to Dev Team for the hard work on Untethered JB on 4.3.1...did anyone had a issue after JB ur iP4 had no carrier network on PwnageTool 4.3? Then i tried JB on Redsn0w then i turn off 3g (i dont know if effect) and its work out fine.....Thanks again Dev Team for your Fabulous Piece Of Art..

asdfsd_croat - April 5, 2011 at 3:02am

happend to me BUT then i did another restore then it worked... after RESTORING ipsw from iTunes turn on your phone, enter sim pin and wait for network to initialize...then power off and do the redsnow procedure...then it worked...first time i skipped that initialization

More Comments