December 23, 2024

Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Posted November 23, 2010 at 11:56pm by iClarified
EnglishArabicChinese (Simplified)DutchItalianPortuguese (Brazil)Spanish
Estas son las intrucciones para hacer jailbreak a tu iPad con la version 4.2.1 usando RedSn0w para Mac. Este solo lo podras hacer de manera tethered jailbreak por ahorita. Esto significa que cada ves que reinicies tu iPad necesitaras la ayuda del RedSn0w para ayudar en el encendido de la misma para tu dispositivo.

Si lo que quieres es desbloquear tu iPad con una version anterior por favor dar click en el siguiente link para que encuentres el tutorial adecuado here.


Primer Paso
Crea un folder en tu escritorio llamado Pwnage


Descarga RedSn0w de aqui aqui y guardalo en el Pwnage folder. Asi mismo, descarga la ultima version 4.2.1 en el link abajo mencionado y colocalo en el folder que hemos creado.

4.2.1: iPad1,1_4.2.1_8C148_Restore.ipsw

Descromprime la aplicacion de redsn0w del archivo zip haciendole doble click al folderComo hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Segundo Paso
conecta tu iPad al computadora y abre itunes.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Selecciona tu iPad de la lista de dispositivos en el menu de la izquierda. Ahora sosten la tecla Option y haz click en el Restaurar boton. Restaurar es preferible, ya que no se crea ningún espacio perdido en el IPAD.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Navegue a la carpeta Pwnage en el escritorio y selecciona el archivo ipsw del firmware 4.2.1. Haga clic en el Seleccione [/ i] para continuar.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Tercer Paso
Una vez que iTunes ha terminado de actualizar su IPAD al firmware deseado, abra la carpeta Pwnage en el escritorio y lanzar la redsn0w [/ i] la aplicación de la carpeta redsn0w hemos extraído antes.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Cuarto Paso
Una vez que se abre RedSn0w haga clic en el Ver [/ i] botón
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Quinto Paso
Seleccione el ipsw del firmware 4.2.1 que coloca en la carpeta Pwnage en el escritorio haga clic en Abrir [/ i].
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Sexto Paso
Una ves que la version a sido verificada presione Next para continuar.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Septimo Paso
RedSn0w ahora preparara la data para comenzar el proceso de Jailbreak
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Octavo Paso
Desde esta ventana puede seleccionar las opciones de Jailbreak que le gustaría. Asegúrese de que Cydia [/ i] está seleccionado y haga clic en el siguiente [/ i] para continuar
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Noveno Paso
Por favor, conecte su IPAD en el ordenador y asegúrese de que su dispositivo este apagado y luego haga clic en el Siguiente [/ i] botón
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Decimo Paso
RedSn0w te guiará por los pasos para entrar en modo DFU. Puede encontrar más ayuda con el modo DFU here
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Mantenga presionado el boton de Inicio [/ i] y el de Encender/Apagar [/ i] botón durante 10 segundos.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Suelte el botón Electricidad [/ i] y continuar la celebración de la Inicio [/ i] hasta RedSn0w detecta el dispositivo.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Decimo Primer Paso
Su iPad ahora reiniciara
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Decimo Segundo Paso
RedSn0w luego empezar a cargar el nuevo disco de RAM y kernel.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

Decimo Tercer Paso
Una vez completado esto se le notificará que RedSn0w se hace. Haga clic en el Final [/ i] el botón. Cuando se reinicie el IPAD (5 minutos más o menos) será jailbreak con Cydia en el SpringBoard.
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]


IMPORTANTE:
Para utilizar Redsn0w para ayudar a arrancar de nuevo en el dispositivo jailbroken sólo tiene que seleccionar Justo a la derecha de inicio atados ahora [/ i] en la ventana de opciones y haga clic en siguiente [/ i].
Como hacer un Jailbreak al iPad Usando RedSn0w (Mac) [4.2.1]

* Como de costumbre, un gran agradecimiento para el iPhone Dev-Team, por su ardua labor y contribución a la comunidad iPhone.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (37)
You must login or register to add a comment...
karlo
karlo - February 14, 2011 at 8:32am
i JB my ipad and I turn it off, now if I want turn him on I must boot tethered every time. will I lose my files (apps, calendar, conctats) when i do boot tethered? pleas answer as soon as possible
Mk
Mk - February 8, 2011 at 11:10am
Hello, I just did the jailbreak on my iPad and everything seems to be fine, but I can't sync any of the cracked apps that I have on iTunes... any suggestion???
Rodcal
Rodcal - January 10, 2011 at 1:21am
Hello I have do jailbreak and it works fine but when I turn off and then turn on the ipad, it cant start and cant pass from the Apple logo screen, so then I recover it and do the jailbreak again but the problem is still happening when I turn off the ipad, anyone have an idea to solve it?
LarryInAz
LarryInAz - January 12, 2011 at 8:54pm
Just don't turn it off. Let it go to sleep mode when not using and keep it on charger over night.
Cory
Cory - December 30, 2010 at 2:53am
I've done the jailbreak twice and each time I get a white cydia app that won't open and safari that will not work either. Please Help! Thanks.
criminal record
criminal record - December 30, 2010 at 11:46am
do the last screenshot in this tutorial
LarryInAz
LarryInAz - December 30, 2010 at 11:31pm
When you say you did the jailbreak twice, did you first run it saying to install Cydia and the 2nd time to Tether Only? If you did it this way then the white icon should be the normal brown Cydia icon and it should load fine. If this fixes your problem then in the future if your iPad reboots itself then you only need to run the Tether Only option to reactivate the jailbreak.
LarryInAz
LarryInAz - December 28, 2010 at 9:11pm
I've jailbroken many an iDevice over the last few years. For some reason my iPad will not shut off so I can run Redsn0w. After holding the power button on top and swiping the "slide to power off" button my iPad immediately reboots itself and does not stay off. I am baffled - any advice would be appreciated.
criminal record
criminal record - December 30, 2010 at 11:39am
dont worry about ipad, run redsnow, choose boot tethered now, follow instructions, it will work. try to countdown seconds yourself, just to be correct.
Miha Robnik
Miha Robnik - December 28, 2010 at 4:57am
Jailbreak succsesfull, but... After 48 hours all my instalous programs are gone from iPad and no i did not restore or anything, it was just plugged in the computer to fill the battery.. it doesnt happen if i charge it through wall socket... what is up with that ?!?!
criminal record
criminal record - December 30, 2010 at 11:44am
you have to transfer purchases from ipad or they will be removed, find it on your own.
andre
andre - December 25, 2010 at 11:03am
Hi guys, my Cydia already works, but I can't sync any cracked app... Any suggestions ? thanks
faz
faz - December 17, 2010 at 3:47am
why does the 3G connection not work after jailbreak? is there an unlock neccessary?? please help! :(
Jabba
Jabba - December 10, 2010 at 2:58am
Thanks. Works. But Tethered Reboot is a big problem longer term. The instructions didn't really make it 100% clear that EVERY time you reboot the iPad you have to now Jailbreak it after following the above. But like I said, thanks, I appreciate the efforts very much and hope a breakthrough from this tethered reboot pans out.
Andy
Andy - December 7, 2010 at 3:23pm
My 3G network was unable to detect after I had switch off my airplane mode and I had to boot to Tethered mode to get the network back. Can anyone help? Thanks
iPad Newbie
iPad Newbie - December 1, 2010 at 6:16pm
So what happens to all the apps i bought from iTunes if i JB my iPad? will all be lost? and i will have to pay for the Business apps that i really need and use daily. Or are you supposed to JB as soon as you get the iPad before buying needed apps?
criminal record
criminal record - December 4, 2010 at 1:37pm
you still have them, no worries.
iphoneaddict
iphoneaddict - December 1, 2010 at 5:28am
Following these directions, along with the ones in the comments, I am able to jb, but as soon as I try to sync all my cracked apps after installous, I get stuck at the apple logo, and then I have to do a full restore. This jailbreak is not the best.
99.9
99.9 - December 2, 2010 at 5:54pm
when stuck at the apple logo, simply use redsnow again and boot tethered!
Dan
Dan - November 29, 2010 at 9:51am
Need help! I just did step by step but the iPad freeze just before the white bar gets the final point, I tried this 4 times and the result is the same. And iTunes does not send any message. Any idea on what is going on?
dyohanan
dyohanan - November 29, 2010 at 10:26am
I just connect my other iPad and start working for the stuck iPad, so this issue is fixed, now the problem is that safari and cydia do not work at all. I saw many comments with the same problem, any idea?
dyohanan
dyohanan - November 29, 2010 at 10:34am
Me again, I just run redsnow again and told it to just reboot tethered and safari and cydia start working again, so every time we do a software installation that needs to reboot we need to reboot it again with redsnow.
sparcus
sparcus - November 29, 2010 at 4:04am
works! thanks a lot!
terry
terry - November 26, 2010 at 12:21am
Hi Folks: I read elsewhere the problem is currently Cydia, which does not work currently. When installed it affects other apps SUCH AS SAFARI. I'm going to try the jailbreak again without Cydia and see if Safari works. Hope this helps until Cydia gets updated. Happy Thanks,
guizmo
guizmo - November 26, 2010 at 1:34pm
Hey guys the next step is very important to solve the issues with Safari and no Cydia. Run the RedSnOw again but only using "Just boot tethered right now"
Sparky
Sparky - November 27, 2010 at 1:10pm
The tutorial is missing a few steps at the end. You will see a white Cydia icon. You need to redo the first few steps but select BOOT TETHERED first.
patty
patty - November 28, 2010 at 11:17am
to make cydia work, you need to go through redsn0w again and check the box for Just boot tethered right now from the options window and click Next.
timmy
timmy - November 25, 2010 at 1:28pm
same thing here, neither cydia nor safari works. followed directions twice, same outcome. feedback please?
dandy
dandy - November 24, 2010 at 4:40am
cant get my 3g connection working properly :O
terry
terry - November 24, 2010 at 1:15am
Had the same Cydia problem. As well, Safari does not work. Appears briefly then disappears.
someone
someone - November 24, 2010 at 1:58am
redo jailbreak with an option "just reboot tethered right now" then everything works
carlos
carlos - November 25, 2010 at 11:36pm
Yes I re-did the same with the thetering option and it worked cydia icon and safari now!!, greetings from El Salvador
jipad
jipad - November 24, 2010 at 12:46am
i have tried but after jailbreaking my ipad, the cydia does not work. the icon of cydia is just white.
Aric
Aric - November 24, 2010 at 11:37am
Same problem here. I fixed it by turning the iPad of, running Redsnow with 'just boot tethered right now' ticked. Only problem is now iTunes doesn't recognise the iPad and I can't sync anything across.
Jeffrey26
Jeffrey26 - November 24, 2010 at 12:32pm
I had the same problem. If you go back to redsn0w and run it again but without to check the cydia install option you will found the new logo on start up and cydia will then work.
elia
elia - November 25, 2010 at 4:00pm
i had same problem (cydia doesn't work), and i come back to 3.2 :(
Bruno
Bruno - November 23, 2010 at 11:59pm
First?? Good tut.
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sequoia
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS