Wie du dein iPhone 3GS mit Hilfe von RedSn0w jailbreakest (Mac) [4.3.1]

POST

MAIL

Posted May 6, 2011 at 2:15pm by iClarified

Hier findest du Instruktionen wie du dein Iphone 3GS mit der Firmware iOS 4.3.1 und der Hilfe von RedSn0w jailbreakst

Wenn du eine frühere Firmware Version jailbreaken möchtest findest du die passende Anleitung hier.

Achte darauf nicht auf iOS 4.3.1 zu Updaten wenn du einen Unlock benötigst (der momentan nicht zur Verfügung steht außer du nutzt ein Ipad Baseband)

WICHTIG FÜR IPHONES DIE AUF EIN UNLOCK ANGEWIESEN SIND
Während dieses Prozesses kannst du dein baseband auf die Version 06.15 Updaten. Wenn sich auf dem Gerät die Version 05.14, 05.15 oder höher befindet musst du dieses Update durchführen um das Gerät zu unlocken. Wenn das Gerät nur gejailbreaked werden soll ist dieses Update nicht nötig!. BITTE LIES DIESE ANLETIUNG SEHR GEWISSENHAFT bevor du dich entscheidest dieses wirklich zu tun.

1. Es besteht kein Downgrademöglichkeit von der Baseband Version 06.15 und es gibt keine Möglichkeit das Baseband vor Apple zu verbergen oder zu verscheliern. Du verlierst damit eindeutig deine Garantie- und Reklamationsansprüche
2. Wenn ein zukünftiges Baseband erscheint mit einem kritischen Fix, wirst du nicht in der Lage sein dort hin zu updaten wenn es nötig ist vorher in der 05.xx Reihe zu sein (denn noch einmal, du solltest nicht updaten wenn du deinen Unlock auf jedenfall behalten möchtest)
3. Beginnend mit der FW 4.2.1 und dem Baseband 06.15 wirst du nicht mehr in der Lage sein eine orginale Firmware wiederherzustellen (Es wird scheitern!) Du kannst nur noch eine Wiederherstellung aus einer Custom Firmware machen.
4. Es gibt einige Berichte das Baseband 06.15 das GPS vielleicht deaktiviert. Das Iphone Dev-Team arbeitet bereits an einem Fix des Problems.

Update nicht auf 06.15 wenn es nicht unbedingt nötig ist. Mache es nur wenn du dringend ein Unlock benötigst und du eine original Firmware mit Baseband 05.14 oder 05.15 nutzt und dir dem oben genannten Risiko bewusst bist. Wenn dein Baseband bereits unlockbar ist und du eine niedrigere FW Version betreibst, benutze PwnageTool für das 4.3.1 Update ohne das Baseband Update.

Schritt 1
Erstellt auf eurem Schreibtisch einen Ordner mit NamenPwnage
Ladet RedSn0w von hier herunter und verschiebt es in den neuen Ordner. Ebenso ladet das original Update runter und lege es in den gleichen Ordner.

4.3.1 (3GS): iPhone2,1_4.3.1_8G4_Restore.ipsw

Entpacke die RedSn0w zip-Datei durch einen Doppelklick

Wie du dein iPhone 3GS mit Hilfe von RedSn0w jailbreakest (Mac) [4.3.1]

Schritt 2
Verbindet euer Iphone mit dem Mac und starte iTunes

Wählt euer IPhone links aus der Liste der Geräte. Während gedrückter Options-Taste (alt) klickt ihr auf den Wiederherstellen Knopf. Es wird eine Wiederherstellung
empfohlen um keinen überschüssigen Platz zu verschwenden.

Navigiert euch zu dem Pwnage Ordner auf dem Schreibtisch und wählt die 4.3.1 firmware ipsw-Datei. Klickt anschließend auf Auswählen um forzufahren.

Schritt 3
Nachdem iTunes nun das iPhone mit der gewünschten FW wiederhergestellt hat öffnen ihr das Programm redsn0w aus dem zuvor extrahierten Ordner

Schritt 4
Wenn RedSn0w gestartet ist klickt ihr auf den Browse Knopf

Schritt 5
Wählt nun die 4.3.1 ipsw-Datei aus dem Pwnage Ordner auf dem Schreibtisch und klickt anschließend auf Open.

Ihr werdet nun gefragt ob das Gerät welches ihr nutzt eins der neueren überarbeiteten iPhones ist. Wenn dies der fall ist klickt ihr auf Yes, andernfall auf No

Schritt 6
Wenn die Firmware überprüft wurde klickt ihr anschließend auf Next um fortzufahren

Schritt 7
RedSn0w wird nun die Jailbreakdatei vorberieten

Schritt 8
In diesem Fenster könnt ihr euch eure Jailbreak-Optionen aussuchen. Seid sicher das Cydia ausgewählt ist.

Verbose boot zeigt euch während dem Einschalten des Gerätes detalierte Informationen über euer Gerät und wird lediglich von Entwickler und fortgeschrittenen Benutzer genutzt.

Bitte nochmals kontrollieren das Cydia ausgewählt ist. In dieser Anleitung werden wir zusätzlich ein eigenes Startlogo und ein eigenes Wiederherstellungslogo auswählen (Custom boot logo - Custom recovery logo).

Wenn ihr die Option Custom boot logo auswählst öffnet sich ein Dialogfenster in dem ihr zur Auswahl eines entsprechenden Bildes aufgefordert. Navigiert euch zu dem gewünschten Bild, klicke es einmal an und drückt anschließend auf den Open Knopf

*vorgeschriebene Regeln für das Boot logo: RGB or Graustufen Format mit Alpha Kanal und der Maximalabmaße von 320x480px. Wenn du das fertigen Logos von iClarified nutzen möchtest findest du sie unter: Boot Logo, Recovery Logo

Wenn ihr die obere WARNUNG gelesen habt und euer Baseband auf die iPad Version 06.15 Updaten wollt für den Unlock aktiviert "Install iPad Baseband". Drückt auf Yes um eure Auswahl im aufpoppenden Fenster zu bestätigen

Drückt auf "NEXT" um forzufahren

Schritt 9
Schließt euer Iphone per USB-Kabel an den Computer und stellt sicher dass das Gerät ausgeschalten ist. Klickt dann auf Next

Schritt 10
RedSn0w wird euch nun durch die Schritte begleiten um in den DFU-Mode zu gelangen. Mehr Hilfe zu dem DFU-Mode findet ihr hier

Haltet den Home und den Power für 10 Sekunden gedrückt.

Lasst denn Power Knopf los während ihr den Home Knopf weiter gedrückt haltet bis RedSn0w euer Gerät erkennt.

Schritt 11
Euer Iphone wird nun neugestartet

Schritt 12
RedSn0w beginnt nun den RAM Disk und den Kernel auf euer Iphone zu übertragen.

Schritt 13
Nach dem Vorgang abgeschlossen ist werdet ihr benachrichtigt das RedSn0w fertig ist. Klickt nun auf Finish . Sobald euer Iphone neugestartet wurde (dies kann 5 Minuten oder länger dauern) ist es gejailbreaked und Cydia bereits installiert.

*Wie üblich ein großes DANKENSCHÖNan das iPhone Dev-Team und I0n1c für ihre harte Arbeit und ihren Beitrag für die iPhone Community.

Follow iClarified

Rose - June 26, 2011 at 12:56pm

In step 2, iTunes is telling me that my iPhone "could not be restored because the firmware file is not compatible." My phone isn't activated, so I can't figure out how to even find out what firmware it has. I restored it two days ago through iTunes, which probably means I've got the most recent version, which could be bad news bears for me?

Reply · Like

Jimmy - March 11, 2012 at 12:22pm

Apple and Palm are selling a artpfolm. They want all users of there devices to get updates to drive the artpfolm forward. I'm been saying this very same thing on several posts awhile back. Companies, namely HTC are only interested in selling phones. They rather you just buy a new phone if your old one has bugs. Google should FORCE device makers using android compulsory updates. The old G1 should get android 2.1. Microsoft with WM7 should control 100% of the software that goes on the phones, similar to the model that google is doing with the nexus one.

Rangga - March 13, 2012 at 4:53am

Not quite a year ago, I switched from HTC's iwodnw based phones. My last 3 phones have been imported into the US and I loved them. I did the usual hacking of the ROM's and made it the way I wanted it. I bad-mouthed iphones all day long.Then, I bought one on a whim. Now almost a year later, I have bought 5 different iphones for members of my family. Though I agree somewhat with the closed-minded business practices of Apple, it's tough to beat the ease and usefulness of the iphone. The apps and software design IMO is superior to any iwodnw's based phone for daily use.And now with the new 4.0 OS coming out, it will be the cat's meow I can't wait. And if that were not enough, the possibility that the new 4G may have a removable battery seals the deal. I've always complained about the iphone's battery usage, I thought it was ridiculous. By noon, my battery was dead and I was charging again. After having to replace my iphone 3Gs because I broke it, I received a new one with the 3.1.3 OS. Funny thing now, since I can't jailbreak it like my old one, my battery life goes from 6:30am to 7-8pm before I have to charge it. At first I thought it was the fact that the new phone comes with a new battery but I had recently replaced my battery in my old iphone.Apparently, jailbreaking uses more battery than I thought.An interesting sidenote, when my iphone broke and I had to wait till Monday to replace it, I fired up my trusty HTC and what a disappointment, it was so awkward and non-refined, I ended up using my iphone though I only had a speaker phone to work.Guess I do love my iphone.

AJ - June 6, 2011 at 9:11am

I have my iPhone on FW 4.3.2 & I am using Mac to unlock. In step 2, after I browse the "iPhone2,1_4.3.2_8H7_Restore.ipsw" file, it prompts me "iTunes will erase and restore your iPhone to iOS 4.3.2 and will verify the restore with Apple." If I click restore, it says "The iPhone could not be restored. This device isn't eligible for the requested build." Any idea how I can get away with this error ?

Ryan - August 4, 2011 at 5:21am

Same thing happened to me, it's because an Apple server was blocked in my Hosts file. Go to this folder: /private/etc/ Locate the "hosts" file and open it up. See if there is a line that looks like this... #74.208.10.249 gs.apple.com If so, remove the "#" at the beginning and save the file. You may need to adjust permissions before you can save. After I did this, iTunes allowed the custom firmware to load. Good luck!

unixes - May 14, 2011 at 5:36pm

I was on 4.0.1.I update it on iTunes to 4.3.3 then Jailbreak it with RedSn0w.Everything worked perfectly! Thank you.

Paul - May 8, 2011 at 3:43pm

I have a 3GS (newer) and I followed all the steps installing only cydia, but then after the "waiting for reboot" phase the phone's screen goes white and redsn0w says "unexpected error". Any idea ?

Scott M - May 20, 2011 at 6:46pm

did you find a fix to the problem, because I have the same one.

kdb - May 23, 2011 at 4:07pm

I have same problem....have tried 3 time following iclarified steps

cjc - June 8, 2011 at 1:09am

count me as having the same problem. I found some info somewhere that indicated that somebody had luck by doing a full restore then re-running redsn0w, so I tried that. didn't work. would love a solution... may try on a PC. I've been doing all this on a macbook 2006.

Tom Smith - May 6, 2011 at 6:16pm

So I just jailbroke it, it restarts and Cydia is sitting there but the icon is grey...i try to open it but it just crashes...what the hell?

Don Draper - May 6, 2011 at 2:38pm

When you do the "Option"+restore does it preserve the data on your iPhone? I have over 100 customized apps so I'd prefer it to not wipe the phone...

xdrive - April 27, 2011 at 12:21pm

i tried to jailbreak iphone 3gs using redsnow 9.6rc14 but the jailbreak fails. only ipad baseband is upgraded. its a 3gs with serial xxx49 so i selected YES when prompted to have a fixed bootroom. what did i do wrong? i updated to stock apple 4.3.2 firmware before jailbreak. from 4.3 to 4.3.2. everytime i do the jailbreak again, there is a crash error in the iphone screen and when the iphone reboots CYDIA cant be found anywhere in the home screen.

Black_Hawk - April 19, 2011 at 12:23pm

Well "The iPhone could not be restored. This device isn't eligible for the requested build" thats itunes message and i do not want to be on the 5.16.02 and im @ 5.15. So with the risks i won't ipad baseband update so how do i get around this itunes error??

Yasmina - March 11, 2012 at 2:19am

Hi Pugalenthi!The file I linked in the end of this post is allcatuy a plain zip file so you can unzip it and see the source code and other relevant resources. In order to modify this to work on your iPhone 3g, you would need to unzip the file and check the hardware IDs of iPhone 3g from the properties (see the picture in the beginning of the post). Then you would need to replace the iPhone 4 hardware IDs listed in the code (in some file in the root of the unzipped folder) with the ones for iPhone 3g. Finally, you would need to zip the source codes back into a similar package you downloaded (don't change the filename) and proceed with the instructions on how to install the package to your system. Ideally you would not need any special tools to make the change. However, the tutorials and tools can be found from Device Experience Development Kit that is available . It's not a 10-minute job to use those tools, tho.

Max - April 19, 2011 at 5:21am

I'm unable to download the redsn0w file. Can someone pls upload the file for me somewhere?

Seb - April 21, 2011 at 7:55am

Me too.... pls upload it again!?

stevesien - April 19, 2011 at 12:30am

3gs. Jbroke 4.3.2, was fine on 4.3.1, Cydia is white icon and does not work. Anyone else g this? Anyone fix it. Should have left it alone.

stevesien - April 19, 2011 at 2:59am

I redid everything, reinstalled stock 4.3.2 from Apple, then did Redsnow again, now its OK, had to reinstall Cydia once also after initial run of Cydia. All this with the ##74.208.10.249 gs.apple.com blocked Now its all good :)

Frank Foehrenbach - April 6, 2011 at 2:11pm

I am currently running iOS 4.2.1 on an iPhone 3GS and iTunes 10.2.1. When following the steps in this guide, Step 2 instructs the reader to perform a restore in iTunes, selecting the downloaded ipsw file. After I select the ipsw file (iPhone2,1_4.3.1_8G4_Restore.ipsw), I get the following message "iTunes will erase and restore your phone to iOS 4.3.1and will verify the restore with Apple". I click on the Restore button, and I am getting the following message "The iPhone could not be restored. This device isn't eligible for the requested build" Anyone know what I am doing wrong here? Did I download the wrong ipsw file?

Amanda - April 6, 2011 at 2:36pm

Try plugging in your iPhone to iTunes and updating to software 4.3.1. Then follow the steps in this guide.

Frank Foehrenbach - April 6, 2011 at 2:46pm

Sorry forgot to mention that my iPhone 3GS is already jailbroken at iOS 4.2.1. Do I upgrade using the Download from Apple to 4.3.1 then jailbreak it again using the steps in the guide? I thought updating your phone using the download from Apple would not allow you to jailbreak your phone again. Thanks in advance.

Amanda - April 6, 2011 at 2:53pm

I had to update my 3GS to 4.3.1 using itunes a week ago due to a problem I ran into. So a few days ago I used these steps to jailbreak. I had to try it a few times because I rushed it the first time. Once I did each step properly it worked like a charm.

Amanda - April 6, 2011 at 2:59pm

I forgot to add that my 3GS was jailbroken before I updated to 4.3.1. I didn't have a problem jailbreaking again. I have heard the same about not being able to jailbreak again but I believe that only applies to the former jailbreak software. As in if you updated to 4.3.1 before they developed the jailbreak for the 4.3.1 software, the. You wouldn't be able to jailbreak until the released the new jailbreak version. Make sense?

Frank Foehrenbach - April 6, 2011 at 6:07pm

Thanks Amanda, that does make sense, though I tried updating my iPhone 3GS from 4.2.1 (jailbroken) to 4.3.1 in iTunes with Apple update (iTunes -> Check for Updates) and I am still getting the same message. Thoughts?

Amanda - April 6, 2011 at 7:50pm

Hmmm, I remember I having this problem the second time I tried this jailbreak. However, I can seem to remember how I got it to work. The only thing I can think that I did differently was that when I let it update on iTunes I stopped it directly after the update and did not let it resync to the previous settings (i.e. Adding photos and apps that you had backed up) basically when I did the above steps my iPhone was "naked" or in the original settings as it was when it came out of the box.

betz - April 19, 2011 at 1:50pm

you should instal this one: iPhone2,1_4.3.2_8H7_Restore.ipsw i think what u got is for iphone 4.

dave - May 7, 2011 at 1:30pm

I just had this problem and I was restoring my 3GS from jailbroken 4.3.1 using 4.3.3 and I received the same error in itunes. I had previously used diskaid to move files and I used iFile to delete the diskaid directory. Once I did this the restore went smoothly. Hope that helps! Also I was on Windows 7

buddy - May 8, 2011 at 2:20pm

I have the same issue. It won't even let me restore the phone. It's a new refurbed iPhone 3GS. I can't get a restore even in DFU mode. I've tried the ipsw's for both 4.3.3 and 4.3.1 (I know I don't have SHSH's saved so this shouldn't work) both for 3GS. I have not yet tried tricking itunes to ask cydia for the SHSH's for 4.3.3 since I backed them up with tiny umbrella already. I'm asking Apple why I can't even restore my phone normally. Any suggestions? iPhone 3GS old bootrom iOS 4.3.1 Mac - iTunes 10.2.2

buddy - May 8, 2011 at 5:59pm

Fixed! So if you are currently at 4.3.3 through iTunes (not using the custom ipsw from iClarified) you can use the iTunes/Apple ipsw in Redsnow (although unlockers should use a custom ipsw I believe. I am just jailbreaking). To find this iTunes ipsw for 4.3.3 (on a Mac) go to Home>Library>iTunes>iPhone2,1_4.3.3_8J2_Restore.ipsw and select that file in Redsnow. -Rock!

Amanda - April 4, 2011 at 4:01pm

Ugh! I used this method twice and both times the end result is not picking up service....it's extremely frustrating! Any suggestions?

Amanda - April 4, 2011 at 4:38pm

Disreguard!! IT WORKS GREAT NOW! :)

mTjay - April 5, 2011 at 10:57am

What did u do?? I still dont have service... ;/

mal - April 5, 2011 at 11:22am

can you be more specific about how you solved the problem.

Amanda - April 5, 2011 at 2:09pm

I simply redid the whole process of resetting and the actual jailbreak. The first time when I was holding the power button waiting to release it skipped the entire 3 step to enter the mode to jailbreak. So then when I started over I made sure I did every step and it worked. I must have rushed it. Hope that helps. If it doesn't work for you feel free to ask more specific questions.

MarkF - April 4, 2011 at 12:15pm

3GS with 3,4,5 digits of s/n as 035. I said my phone was a new one (I figure 0 == 2010) and went thru steps. At step where I hold the power button down the phone boots and connects straight away. I don't get to the steps where I have to hold down the home button and then let go the power button. Then it's followed immediately by an 'unexpected error' Sigh

kgirl - April 5, 2011 at 4:37pm

I have same problem, although chose no. First time round it got through that section and then had an error during the break. After that I get the crash you descrbe

Scott M - May 20, 2011 at 6:45pm

Hey I have the same problem, were you able to fix it?

lc - April 4, 2011 at 11:00am

3GS JB upgraded go baseband 06.15 from 05.14 done and unlocked with ultrasn0w

Aza - April 18, 2011 at 11:21pm

Does ultrasnow works on 4.3.2?Any problem?

Domi - April 4, 2011 at 4:23am

just lost all my important data after installing the new IOS...(didnt sync iphone..and re-installed windows a day ago..so nothing's left) =(