Jailbreak используя BlackRa1n [Windows] для iPhone, iPod

POST

MAIL

Posted October 11, 2009 at 5:07am by iClarified

Инструкция по джейлбрейку Вашего iPhone или iPod с помощью BlackRa1n для Windows.

BlackRa1n делает джейлбрейк последней прошивки 3.1.2, но не выполняет анлок. Это означает, что если Вы являетесь владельцем телефона с поддержкой одного оператора, то BlackRa1n не сможет разлочит Ваш аппарат для всех провайдеров сотовой связи.

Для новых iPod touch BlackRa1n может только временно сделать джейлбрейк. Т.е. сделав джейлбрейк Вы не должны разряжать батарею. Если батарея сядет, то Вам понадобиться подсоединить iPod к компьютеру заново и использовать BlackRa1n для его загрузки.

ВНИМАНИЕ: не обновляйтесь, если у Вас iPhone с прошивкой 3.0.1 или 3.0, даже учитывая, что джейлбрейк GeoHotа поддерживает версию 3.1.2. Вы потеряете свой инлок. Используйте PwnageTool для безопасного обновления до 3.1.2 без повышения версии модема. Если Вам действительно необходима версия 3.1.2, тогда подождите следующую версию PwnageTool. Если Вы уже обновились до 3.1 или 3.1.2 без PwnageTool, тогда Вы не сможете сделать анлок пока он не выйдет. Теперь Вы готовы использовать BlackRa1n для джейлбрейка :)

Итак, начнём...

Шаг Первый
Откройте Ваш браузер и пройдите по ссылке http://www.blackra1n.com. Щёлкните значёк Windows внизу экрана.

Jailbreak используя BlackRa1n [Windows] для iPhone, iPod

Шаг Второй
При запросе сохранения файла скачайте его на Рабочий стол

Шаг Третий
Двойным щелчком мышки запустите blackra1n файл с Вашего Рабочего стола

Шаг Четвёртый
Убедитесь, что Ваш iPhone или iPod подсоединён к компьютеру, затем нажминте на большую кнопку make it ra1n

Шаг Пятый
Ваш iPhone перейдёт в режим восстановления (recovery mode).

Вы увидите картинку GeoHotа на экране Вашего устройства вместо экрана восстановления (recovery mode screen).

blackra1n запустился, после чего Ваше устройство перезагрузится.

Появиться всплывающее сообщение, информирующее Вас о том, что BlackRa1n бесплатное ПО и если Вы цените старания автора, то можете помочь материально GeoHotу переведя чуть денег на адрес geohot@gmail.com.

Шаг Шестой
После перезагрузки Вашего устройства джейлбрейк завершится и Вы увидите иконку blackra1n на экране. Убедитесь в наличии интернет соединения и запустите приложение.

Выберете приложение для установки по Вашему желанию и нажмите кнопку Install в верхнем правом углу экрана

BlackRa1n скачает и установит выбранный Вами пакет.

Шаг Седьмой
После завершения BlackRa1n перезагрузит iPhone и вы обнаружите установленный пакет на Springboard, который выбрали ранее.

Шаг Восьмой
После того как проверите, что установленный пакет работает дожным образом Вы можете использовать кнопку Uninstall blackra1n в приложении BlackRa1n, что бы удалить со своего springboard.

***БЛАГОДАРНОСТИ: Большое спасибо Geohotу за то, что этот джейлбрейк стал возможен. Так же огромное спасибо всем тем, кто способствовал успеху проекта.

Follow iClarified

Marikunin - October 3, 2013 at 10:12am

Ok, um, I did the whole jailbreak thing but the blackra1n app is still open and says done, wait for reboot. My iPod is on but there's no blackra1n icon yet. What's with that?

Reply · Like

free0721 - September 5, 2013 at 1:31pm

can someone help me jailbreak my ipod touch please

Mick - February 20, 2013 at 3:34am

the guys image isnt coming up when its in recovery mode? whats wrong with it

qwertyuiopasdfghjklzxcvbnm - January 16, 2013 at 12:47am

will it work for a iPhone 4s

Fjejgfhr - March 28, 2013 at 12:50pm

This will not work for any Idevice after the second gen iPhone but for those that want to jailbreak a ios 6.0 - 6.1.2 Idevice you can use evasi0n by the evaders. It's is really simple and it is UNTETHERED which means that if the battery dies you won't have to reboot with evasi0n Hope it helps :)

anita - June 20, 2011 at 5:10pm

I cannot run Blackweather, the computer says: the application has failed to start because ASL.Dll is not found. why does it happen?

ahmad - November 30, 2012 at 8:21am

you need to copy it to c:/programs files/common files/Apple/apple application support and run it from there

free0721 - September 5, 2013 at 1:25pm

I 'm having trouble jailbreaking my ipod touch can u help me please??

jordan - May 4, 2011 at 11:17am

heyy

neel - February 27, 2011 at 6:24am

nothin happened after pop up saying thnks happened. ipod is fine no cydia and the icon launches the little popup saying make it ra1n

abigail - September 28, 2010 at 2:04pm

me pueden ayudar plssssss

Scott - September 1, 2010 at 12:07pm

Hi I jailbroken my iphone 1st gen 3.1.2 using blackra1n and then used bootneuter from cydia to unlock it Afterwards, the phone worked perfectedly until after I restored my old contacts using itunes, now my iphone is frozen with black screen, with an apple logo and a loading bar that doesnt move

ksothea - June 1, 2010 at 5:09am

Does your soft can jialbreak iphone 3gs 3.1.3 or not ?

Lost & Confused - May 21, 2010 at 3:36pm

iphone 3gs with 3.1.2 os i jailbroke my phone about 2 months ago (tethered jailbreak) used blackra1n rc3. my battery died and have to rerun blackra1n to reboot, i tried this but the iphone3gs stays in restore mode. when i ran blackra1n to reboot, geohotz face shows up on the phone for a couple of seconds and then phone shuts off and goes back into restore mode. i tried with windows 7,Vista and xp still no luck. i dont want to try spirit JB due to no unlock for t mobile. can anyone help me please. reply here or email me. smurvine@gmail.com thanks in advance

Capitanloria - May 9, 2010 at 2:42pm

I have an iphone 3gs 3.1.2... i had it thetered unlocked with blackra1n but suddenly when it ran out of battery and tried to unlocked, after the tipical screen comes up it shuts down again... what is happening...can somebody tell? and what to do...please...im without cell phone and i need it a lot!!!!!! please thanks........ help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!11

Andy - March 30, 2010 at 8:09am

The process works fine for me, until Step 5. My phone goes into recovery mode, but the geohot screen doesnt appear, a black screen remains. Anybody be able to help me out?

Nick - March 3, 2010 at 7:51pm

that last update the 3.1.3 took away my jailbreak and i tried to download it again but failed. Can somebody respond?

carlos - April 14, 2010 at 12:51am

If you did the update through itunes, your iphone can not be unlocked.

abigail - September 28, 2010 at 2:01pm

si me pueden ayudar a conectarme plsssssss

Jaynsteen - February 28, 2010 at 1:55am

Can someonehelp, I'm really new to all this. My iPhone is the best thing since pants with pockets here, but I am not eactly sure what a jailbreak is. I mean I have a 3g 16 n the 8g do I wanna jailbreak it Att is my wireless company. What will doing this allow me to do with this phone that I can't already?? Does it not reaquiere me a carriers? Please help me! - old skool. Thanks!!!

carlos - April 14, 2010 at 12:45am

Jailbreak, allows you to download and install unlimited free applications through cydia instead of using itunes, you can changue the initial screen on your iphone, wallpapers, anything you want to do. Jailbreak does not mean unlocked so you only can use your phone with your actual carrier, once the phone is jailbroken it can be unlocked to use it with any carrier.

Samurai - February 26, 2010 at 3:17am

Need help! my iPhone is with 3.0 firmware and jailbroken with redsnow. how do i upgraded it to 3.1.2 and jailbreak it with blackra1n with the provided steps above. Thanks in advance!

wej - February 18, 2010 at 7:30am

wer can i download ipod 3g 3.1.2 firmware?

faispro - February 15, 2010 at 7:04am

Guys help me out here. I used blackra1n to jailbreak my 3GS 3.1.2 device . It was fine till I reached the springboard. The wireless was not working properly. I uninstalled blackra1n but after reinstalling it I can't get the icon anymore. I can't restore the Iphone coz the latest update is 3.1.3 and blackra1n won't work with it. Can anyone help me?

Jonath - March 30, 2010 at 11:50am

i hav the same problem like u... pls help

Daniel - May 2, 2010 at 5:03am

the same thing happened to me although i also deleted cydia and i had installous and winterboard (two app things that are not deletable by just holding then pressing the cross) on my ipod as icons and u need cydia to uninstall them so i had to reinstall cydia but u cant coz this blackra1n won't reinstall!! WE RLY NEED HELP!!

xRome - February 11, 2010 at 10:16pm

hey all i am REALLY confused and need some help here. I have purchased a brand new still sealed in the box iPhone 2G and need to unlock it for Tmobile. But ALL the unlocks I have found that work with the newer firmware (blackra1n, redsn0w) require me to update to 3.1.2 before running the jailbreak. How is it possible for me to update to 3.1.2 when I can't even activate my phone, because I am not going on AT&T! I can't find the answer to this anywhere, please help!!!! Can i just take my iPhone 2G out of its original box and use blackra1n right away? Do I start blackrain with my tmobile SIM in, or no SIM?

Chino - January 28, 2010 at 1:29pm

Hello. Thank you for posting these wonderful goodies to jailbreak iphones. here are couple of my questions. I jailbroke 2 iphones 3G and 3GS. Both phone does have the version 3.1.2 and moderm firmware of 05.11.07 For the 3G I can no longer send MMS pics. Any suggestions? For the 3GS i lost the Mail icon. Any suggestions? Greatly appreciated if someone can help me..

More Comments