Como desbloquear seu Iphone usando o SAM [Mais fácil]

POST

MAIL

Posted April 25, 2012 at 9:50pm by iClarified

Existe um modo muito mais fácil de desbloquear seu iPhone usando o SAM. Esse método funciona nos iPhone 4S, iPhone 4, iPhone 3GS, and iPhone 3G com jailbreakable e firmware inclusive 5.x. As instruções originais podem ser encontradas aqui.

1º Passo
Faça o jailbreak no seu iPhone. Você pode achar instruções de como fazer isso no Jailbreak Wizard do IClarified.

2º Passo
Pressione Cydia no seu SpringBoard para iniciá-lo.

Como desbloquear seu Iphone usando o SAM [Mais fácil]

3º Passo
Pressione a opção Manage nas abas de baixo da tela.

4º Passo
Pressione o botão grande Sources.

5º Passo
Pressione o botão Edit do lado direito em cima da tela.

6º Passo
Pressione o botão Add que aparece do lado esquerdo em cima da tela.

7º Passo
Coloque http://repo.bingner.com e pressione o botao Add Source.

8º Passo
Pressione o botão grande Return to Cydia.

9º Passo
Pressione para selecionar Bingner da lista de Sources.

10º Passo
Escolha SAM da lista de pacotes.

11º passo
Pressione o botão Install do lado direito em cima da tela.

12º passo
Pressione o botão Confirm para iniciar a instalação.

13º Passo
Após a instalação completar pressione o botão grande Reload SpringBoard.

14º Passo
Coloque seu novo SIM card e selecione SAMPrefs na sua SpringBoard.

15º Passo
Certifique-se de que o método selecionado seja Auto Detect e pressione Utilities. Nota**: Se o Auto-Detect não funcionar você pode mduar o método para By Country and Carrier e selecionar manualmente a operadora ORIGINAL para quela seu Iphone.

16º Passo
Pressione o botão Attempt Activation. Se você não ver Attempt Activation então escolha De-Activate iPhone e o botão Attempt Activation deve aparecer.

17º Passo
Irá apareer um popup informado que pdoe demorar um pouco - "this may take a while".

18º Passo
Eventualmente seu Iphone vai reiniciar sua Springboard e após procurar por um tempo sua nova rede será detectada!

19º Passo
Agora você pode fazer o backup do unlock ticket do seu iPhone caso esse método seja bloqueado. Você pode encontrar informações sobre esse tipo de backup do unlock ticket aqui.

IMPORTANTE:
Seu Iphone irá funcionar normalmente com o seu SIM card e somente com esse SIM já que nós enganamos o iTunes para pensar que o ICCID é o da operadora. O aparelho pode ser reiniciado e conectado normalmente ao iTunes sem perder o "desbloqueio", pelo menos pro enquanto.

Um grande agradecimento a Sam Bingner, Loktar_Sun e Laforet pelas contribuições!

ATUALIZAÇÕES:
Você pode seguir iClarified no Twitter, Facebook, ou através de RSS para novidades...

Follow iClarified

Di Scott - June 6, 2016 at 4:35am

If anyone is having a problem with their code or is looking for a place to get a code to unlock their phone, I would suggest giving www.unlockyoursim.com a go :) It doesn’t cost at all, you just need to complete a short survey (I know, one of those!) but it worked for me so.. it’s worth trying out. Hope this helps!

Reply · Like

Dana - September 4, 2014 at 9:25pm

SAM does not work anymore. Apple has out smarted the "nerds"... for now anyway.

Taha - May 4, 2014 at 4:49am

hi! i dont know on which carrier my phone is locked to please help

zafar - January 10, 2013 at 10:30pm

i try to unlock with every thing SAM ULTRASNOW even gevey sim but still not unlock...why is gevey sim is not working in it ...i have another iphone same model number MC603B DIFFERENT baseband 03.10.01 working fine in it but not with this baseband 04.12.01 why? please help me out thanks

zafar - January 10, 2013 at 10:18pm

done it showing wildcardactivated but still no service iphone 4 baseband 04.12.01 version 5.1.1 model mc603b

Mark Chiu - November 11, 2012 at 4:17am

I would like to ask has anyone recently unlock the iphone 4 locked to bell?? I would like to unlock it to "Chatr" in toronto canada. I have followed at the end and everything supposed to happen, happened and stuck at the itunes unlocking step....I have a couple of questions would like to calrify... 1st: I used and paid the service from iphone-unlockme...and the first step that I followed is sent in my IMEI ID and I received a message stating that I need to wait 10 - 15 days to let apple unlock my iphone...is this correct?? 2nd: which carrier should i choose if I want to unlock from the original to the new sim carrier when I set up the SAM??? Thank you all~~

J - November 11, 2012 at 1:19pm

SAM unlock is not working for a long time already, so dont bother. And yes, you have to wait certain time, to get unlock, if you used a web service. When the unlock is completed, just restore you phone and it will work.

Mark Chiu - November 13, 2012 at 12:18am

Hi, thanks for the comment! But may I ask what do you mean by "restore" my iphone?? And may I ask why as long as i sent in my IMEI number then the phone will be unlocked??? Thanks

J - November 13, 2012 at 6:02am

Switch off your phone, launch iTunes, then connect the phone to the computer by holding the round button pressed. hold it until computer says that it has detected a phone in recovery mode, then press restore. Before you do this, back up your phone.

derin - September 7, 2012 at 5:39pm

today i install sam, it is work perfect, and i did all steps and i Hit attemp activation, it restart my iphone, but finally it is not give services, please help me

derin - September 8, 2012 at 3:05am

can you told me how? it need how many $? please explain

Leandro - September 8, 2012 at 2:05pm

Hy, on ebaycom you can find many sellers that can unlock your iPhone, I payed 13$ to official unlock. You only have to send your imei , after 24h its completely unlocked you can even do updates. Go to this website and type unlock iPhone. You ll find this sellers.

Keron Jones - May 26, 2012 at 11:58pm

i found a way to unlock.. u need to use redsnow and flash the baseband with the ipad baseband and it should work. i have an iPhone 3gs running on 5.1.1 untethered.

RC - May 28, 2012 at 12:34am

could you explain how to flash the baseband?

Tash - May 6, 2012 at 11:24pm

will this work with an at&t iphone4 5.1 bb 04.12.01? Im scared to do it if it doesnt work. please help!

Granny - May 6, 2012 at 11:27pm

Tash it won't work anymore. Apple fixed there servers a week ago I think. You'll have to wait. Sorry babe

Tash - May 7, 2012 at 2:24am

Ahhh! So now i have to wait for another unlock update? i need it unlock bc im an international student, is there any other way i can unlock this phone?

Granny - May 7, 2012 at 1:06pm

What phone do you have?

Tash - May 7, 2012 at 1:17pm

iphone 4... version 5.1 BB 04.12.01

Granny - May 7, 2012 at 5:05pm

Yea you'll have to wait. I waited 7 months for this last one. :). Keep your eye on this page

Leandro - May 15, 2012 at 9:54am

Hi, i spend 30 days trying to unlock my iPhone, the only way that i found is unlocksolutionscom, i bought it last week and now my iPhone is unlocked, 100% trustfull, its little expensive but you dont need to buy other phone

10k - May 3, 2012 at 2:23pm

No service. Did Apple already block this? Is there anything that needs to be undone before making a 2nd attempt?

quiksilver - May 4, 2012 at 6:26am

Like it says on the top. Apple is blocking this unlock method. We are patiently waiting for a new way to unlock our new devices. Hope it will be possible soon.

quiksilver - May 3, 2012 at 11:44am

when can we expect an update or another way to unlock?

rorouni - May 2, 2012 at 2:33pm

Is this Unlock still working? please update us if this is still usable..

PG - May 2, 2012 at 2:35am

Didn't work for me either, iPhone 4, iOS 5.1.. It continues to say - No Service. Anybody had luck in activating on a similar platform?

LEANDRO - April 29, 2012 at 1:43pm

Work with all basebands?? including 4.12.01 ? tks

Jas - April 28, 2012 at 5:37am

I used this simple method now, but I'm getting an option of invalid sim... What to do

ken - April 28, 2012 at 5:34am

I guess this unlocking method is no longer work since Apple has just fixed it. I just tried on my iPhone 4 5.0.1 and it didn't work. Anyone else has the same problem?

cedric - April 28, 2012 at 5:20am

Is it correct that using the SAM unlock, I can only work 2 SIM cards max?

Danny - April 27, 2012 at 9:28pm

I have an: iPhone 4 V: 5.0.1 BB: 4.10.01 JB and unlocked with Gevey Ultra & running Furious Mod I'm tying to unlock it using this SAM method so I don't have to rely Gevey Ultra anymore but every time I click the "Attempt Activation" button I get this notification: "SAM notification "activation reports Error: activationinfo rejected. you must select the original carrier SIMID of your phone." I tried using the Auto Detect method which is recommended and Method to By Country and Carrier and select the phone's ORIGINAL carrier manually (U.S & tried both AT&T) with no luck. Anyone else have this problem or a solution to this?

J - April 28, 2012 at 4:56am

SAme problem for me...

JeePy - April 28, 2012 at 8:00pm

Same for me too... If anybody knows how to fix this, please post-it

Hassan Ahmed butt - April 27, 2012 at 6:08pm

Hi it took me 2 min to unlock my iphone4 but for last 2 hours I'm trying to unlock 3GS its giving the error about carrier and use simid any 1 can help will b very appreciated

simon D - April 27, 2012 at 10:00am

Hi All, I have a iphone 3G which has been jailbroken to iOS 4.1 with the iPad baseband Will this SAM trick help with this as when i use ultrasn0w i get Call failed Any help or advice on the use of SAM with my setup or my ultrasn0w issue is appreciated Cheers S

More Comments