Kako Jailbreakati Va 2.x.x iPhone 3G Pomoću QuickPwna (Windows)

POST

MAIL

Posted February 3, 2009 at 11:40pm by iClarified

Kako jailbreakati vaš 2.x.x iPhone 3G pomoću QuickPwna (Windows)
Ovo su upute kako jailbreakti iPhone 3G na 2.1-2.2.1 iPhone firmware pomoću QuickPwna za Windows.

Ovo su upute kako jailbreakti iPhone 3G na 2.1-2.2.1 iPhone firmware pomoću QuickPwna za Windows. Prije počeka budite sigurni da je iTunes updatean na verziju 8.0.2.

Prvi korak
Napravite folder s imenom Pwnage na vašem Dekstopu.

Downloadajte sljedeće fileove i smjestite ih u novokreirani folder:
- QuickPwn-225-2.zip

ZA ONE KOJI ŽELE UNLOCK:
- 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw

ZA ONE KOJI NE ŽELE UNLOCK:
- 2.2.1 (3G): iPhone1,2_2.2.1_5H11_Restore.ipsw

Extractirajte QucikPwn-225-2.zip u novokreirani folder.

Drugi korak
Spojite svoj iPhone s računalom, te pokrenite iTunes.

Odaberite vaš uređaj na lijevoj strani. Sada pritisnite i držite Shift gumb, te kliknite Restore gumb u iTunesu. Restore je preporučljiv zbog toga što neće bezvezno potrošiti dio vašeg prostora na iPhoneu.

Otvorite Pwnage folder s vašeg desktopa, te odaberite firmware ipsw. Kliknite Open gumb da bi nastavili.

Treći korak
Nakon što iTunes dovrši update i vi ugasite iTunes, pokrenite QuickPwn.exe iz Pwnage foldera.

Korak četiri
Provjerite jeli iPhone spojen na računalo i kliknite na plavu strjelicu.

Peti korak
Kliknite Browse gumb i odaberite iPhone firmware s kojim ste maloprije restoreali svoj iPhone.

Šesti korak
Kliknite sada na taj iPhone Firmware te kliknite Open gumb.

Sedmi korak
QuickPwn će sada provjeriti jeli iPhone Firmware valjan. Kliknite plavu strjelicu da bi nastavili.

Osmi korak
Sada možete odabrati što želite dodati u vaš iPhone, Cydia, Installer ili možete promijeniti boot logo. Odaberite što želite i kliknite na plavu strjelicu.

Deveti korak
Sad će vas QucikPwn pitati da potvrdite da je iPhone stvarno spojen preko USBa na računalo. Kliknite plavu strjelicu da nastavite.

Deseti korak
QuickPwn će sad automatski prebaciti vaš iPhone u recovery mode. Kad bude u recovery modeu morati ćete učini sljedeće: Držati Home gumb 5 sekundi, Držati Home i Power gumbove 10 sekundi, te pustiti Power gumb i nastaviti držati Home gumb sve dok se iPhone ne prebaci u DFU mode.

Dobro pratite što vam QucikPwn kaže!

Jedanaesti korak
Kad QuickPwn detektira iPhone u DFU modeu početi će s jailbreak procesom.

Dvanaesti korak
Kad QuickPwn završi jailbreak, javiti će vam da je jailbreak uspješno obavljen.

Follow iClarified

zaymg - May 21, 2013 at 5:07pm

thank

Reply · Like

carnival cruises - April 19, 2011 at 5:10pm

wonderful website keep up the good work.

Valerie N - August 1, 2009 at 12:03pm

I got through all the steps, now I'm waiting for my iPhone to reboot and nothing ! It's keeps buzzin like it's going to turn on but it doesn't and itunes doesn't show that my iPhone is connected ! Can somebody post what to do now?

joao - July 20, 2009 at 6:25pm

I want to unlock and jailbrake my iPhone 3G but I forgot my passcode. Can anyone help me override the passlock so I can unlock/jailbrake my iPhone.

Shaik usman - June 19, 2009 at 3:08am

i tried to download through the link provided after download, i couldn't found the restore firmware.please help me i wanna unlock 2.2.1(3G).thanks

prongs - June 17, 2009 at 3:57am

Can I use this method to jailbreak an otb iphone 3g thereby also activating it? Or is there another procedure to follow to activate it first. Kindly help.

iphone noob - June 6, 2009 at 7:12am

everything was ok untill the third step man it came out a pop out when i click to launch quickpwn it says an error had cause the program to stop runing WTF? BTWW i am running on vista 32bit system help me man

fun@fun - July 13, 2009 at 3:38pm

I have very same problem. My computer is on XP

margarita - June 4, 2009 at 8:50pm

is it possible to do all this without losing all the contacts, applications, etc?

fank - June 4, 2009 at 7:34pm

i have a jailbroken iphone 3g but can i use ne sim card wid it or it will work only wid the turbo sim..

Shaggy - June 3, 2009 at 11:27am

I get to the QuickPwn step where it says 'wait for your phone to connect in Recovery Mode'... but nothing happens...it wont connect??? Anyone got any ideas? It connects OK through I tunes and I can get this far on the jailbreak. Am I doing anything wrong?

jon - June 8, 2009 at 2:57pm

im having the same problem with quickpwn. any fix?

Nicole - June 11, 2009 at 4:14pm

Same Problem... Does it ever go to recovery mode???

joe - November 1, 2009 at 3:43pm

Im the same cant fix this anyone found a solution to this ?????????

Toni - June 3, 2009 at 6:37am

I succesfully jailbreaked my iphone 3g with firmware 2.2.1. and it works great. I had slight problems with ipsw file. After some delay I removed zip extension and I was able to find ipsw file when QuickPwn asked me to browse for 2.2.1 firmware. Go to Start, Control panel, Folder Options, View, Hide extensions for known file type and then rename folder and remove zip extension. I hope this helps. Bye

Marc - June 1, 2009 at 6:10am

Thanks for the explanation. It works great and I like the pineapple.

Chris - May 27, 2009 at 1:17am

Currious, I have been using ym Iphone since august 08, if I do this restoral for the jailbreak will it wipe all my contacts and everything? if it does is there anyway to merge the two restores, my original one with the jailbroken version?

jazz - May 27, 2009 at 2:42am

Right click ure iPhone in iTunes and create backup then u can restore from backup later

vedtam - May 24, 2009 at 3:54pm

Hi, if I have a new, bricked iPhone 3G I guess I have to start with step 4... or? THX!!!!

Han - May 23, 2009 at 5:31pm

When I get to the `Browse for ipsw` step, I put in the file, 2.2.1, and it should be working, but the blue arrow wont load, and so I cant carry on with the jailbreaking. Nor can I see the iPod that should be on the left hand side. (the one that gets a check mark). Help please?

robert - June 3, 2009 at 5:47am

I am having exactly the same issue. Browse for the firmware and says that quickpawn does not update firmware. It seems the firmware has an extra "2_" at the star tof the file name or something. Please help !!!

yasbm - May 22, 2009 at 4:40pm

Iphone 3G firmware 02.08.01 version 2.0.2(5C1) if i upgrate to 2.2.1 i will have problem with it ? sorry i am new on this thanks for helping

vimm - May 23, 2009 at 12:34pm

if you want to unlocke your phone by useing yellowsnow do not upgrade to 2.2.1. you do custom restore to 2.2.0. I just did my.I have the same firmware.

Nathan - May 20, 2009 at 5:25am

Hi, I followed the instructions. In the middle of first steps (restore with itunes) i get error (9) can't restore. What can I do? if I restore it will put the newest version, which is not jailbroken and i will not be able to jailbreak it... how do I restore to exactly what I had before trying? thanks!

nnm - May 21, 2009 at 12:39am

I used Itunes 7.7 to restore

christopher357 - May 19, 2009 at 3:26pm

if i hack my iphone 2.2.1 can i restor it so the stor cant se that i have hackt it if its stop working??

dono - June 1, 2009 at 10:10am

My i-ph 16Gb 2.2.1(5H11)froze before I got to Step3...! Screen has as a pic of a USB plug and an arrow pointing it at the iTunes logo which has a little picyure of a lock just above it...

ARASH - May 18, 2009 at 2:05am

hey i have a big problem ,it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minuteswhat am i to do?

Felix - May 13, 2009 at 10:47am

I restored my iphone using iPhone1,2_2.2_5G77_Restore.ipsw & quickpwn. Everything worked, except that i dont have service. Can someone help me please? ( flex60mph@aim.com )

jazz - May 13, 2009 at 4:52pm

Have u installed yellowsn0w from cydia

More Comments