Como hacerle Jailbreak a su iPhone 4S Usando Absinthe (Mac) [5.0, 5.0.1]

POST

MAIL

Posted January 20, 2012 at 5:50pm by iClarified

Estas son las instrucciones en como realizar un jailbreak libre en su iPhone 4S usando Absinthe para Mac.

Advertenci***: Antes de que continue asegurese de crear una copia de seguridad de su dispositivo en iTunes porque puede perder sus imajenes en este proceso.

Paso Uno
Descargar la ultima version de Absinthe de aqui.

Paso Dos
Doble click para extraer el archivo descargado y lanzar la aplicacion Absinthe .

Como hacerle Jailbreak a su iPhone 4S Usando Absinthe (Mac) [5.0, 5.0.1]

Paso Tres
Al pedircelo, conecte su iPhone 4S a la computadora via USB. Asegurese de eliminar cualquier codigo de acceso o ajustes VPN que usted previamente hayga configurado.

Paso Quatro
Dar click al boton Jailbreak para comenzar.

Paso Cinco
La aplicacion lo guiara a traves de varios pasos para el jailbreak: Enviando datos iniciales, Esperando reinicio, Esperando que el dispositivo inicie, Preparando datos de jailbreak, y Enviando datos de carga util.

Paso Seis
Se le imformara que el jailbreak esta 'casi terminadod'.

Paso Siete
En su dispositivo, ubique elicono Absinthe y presionelo para completar su jailbreak. puede estar en cualquier pajina de inicio.

Si el servidor esta caido y obtiene un mensaje Error establishing a database connection entonces toque el icono Settings en su pajina de inicio y encienda el VPN.

Usted obtendra un error de configuracion; comosea, despues de un minuto mas o menos su dispositivo se reiniciara con Cydia en la pajina de inicio.

Follow iClarified

Roberto - March 18, 2012 at 1:48pm

Me too!!! Have the same problem ,, any advice,, When is the version to jailbreak an IPHONE 4S IOS 5.1 Is coming out??

Reply · Like

Latif - March 18, 2012 at 2:19am

Amer

omar - March 9, 2012 at 10:32am

amm, hi i have iPhone 4s I ALREADY download and setup absinthe and it works , then i upgrade iOS 5.0 to 5.1.0 now i`m getting this message sorry the attached device is not supported when im trying to install the absinthe. any advice please thanks and regards,

Kay - March 13, 2012 at 4:42am

I'm getting the same problem. ANYONE!?

chris - March 20, 2012 at 9:42pm

Because Absinthe dosent support iphone 4s on 5.1.0 yet, there no jailbreak for the 4s on 5.1.0 keep waiting and hoping??????????????

javcastle - March 6, 2012 at 3:33pm

Is good

MLeinats - March 2, 2012 at 2:35pm

sorry, the attached device is not supported. iPhone 4 Runing 5.0.1 (9a405) Help, please

guest - April 3, 2012 at 5:02am

You're using an iPhone 4 .. this is for 4S only .. use Redsn0w to jailbreak iPhone 4 on 5.0.1

Jinno - February 29, 2012 at 9:43pm

Having a hard time jailbreaking. For some reason Absinthe says it can't load it all the way in the app and refers me to do the VPN setting. I turn it on and nothing happens in the process. Any help?

Cam - February 21, 2012 at 11:09pm

How do you disable the passcode for iPad 2?? On the iPad it doesnt let me turn it off!

Chu - February 5, 2012 at 6:36am

Thank you !! Worked like a charm.

VK - January 30, 2012 at 4:12am

Like a breeze! Thanks!!

Me - January 30, 2012 at 12:39am

worked like a charm, first time.. boom

Spider - January 28, 2012 at 2:11pm

Worked perfectly, like always. Thanks.

Bill - January 26, 2012 at 5:23pm

Doesnt work for me. The app crashes on my mac as soon as I plug in the iphone4s. Not sure why or what to do. Also tried on a windows pc and the jailbreak button never goes active for me to press it.

Philip - January 25, 2012 at 12:08pm

Just want to tell you that when I tried to jailbreak my iPhone 4s on 5.0.1 with Absinthe it failed all the time like for some others. But the solution to my problem was to update to firmware 5.0.1 (iPhone4,1_5.0.1_9A406_Restore.ipsw) first. I was on 5.0.1 but on a earlier release (iPhone4,1_5.0.1_9A405_Restore.ipsw) which apperantly was NOT compatible with Absinthe.

AoS_HJ - January 26, 2012 at 1:22am

Just wanted to thank you for this info. I've been trying for about 2 hours thinking I was doing something obvious wrong but I guess I've just got the wrong firmware :-( Updating now :-)

Philip - January 24, 2012 at 9:52am

First of all, I know this entry shouldn't be here. But I don't know where else to turn. I would love to update my iPhone 3gs to 5.0.1. But I don't know how since my power button is busted and I can't put the phone in DFU. I have googled about putting the phone in DFU without the use of buttons, but I'm afraid it might brick my phone :-( Any help would be much appreciated!!! Has anyone been through this problem?

Vasilis Odysseos - January 22, 2012 at 1:57pm

My iPhone 4S doesn't get recognised by absinthe. what's the problem?

Rahhb - January 21, 2012 at 10:23pm

Anyone with white screen issues after hitting Absinthe, try closing all apps including Absinthe, then turn VPN on in settings. It will likely give you an error, that's ok. Then hit Absinthe again and it should work.

dmont - January 21, 2012 at 8:10pm

Jailbreak worked great, but safari, you tube and the app store crashes. Hopefully the bugs will get worked out. Thanks for the JB!!!!

Andrew - January 21, 2012 at 6:20pm

Hey I have a question. My iphone 4s settings don´t appear the way showed in this tutorial.. To find vpn switch I must go to Settings / General / Network/ VPN not connected/ VPN switch on and off. (The tutorial VPN settings show VPN switch right after opening settings) When i switch VPN on it asks me for a configuration (Description, server, accounts, etc.) I havent started the jailbreak process but will I have a problem jailbreaking my iphone 4s if VPN is not configured?

Christina - January 21, 2012 at 5:58pm

i have tried to unlock 10 times and every time its getting stuck about 1/8 of the way through and says "beginning jailbreak, this may take a while". I have treied rebooting my phone back to factory settings and turning my computer on and off. and it still sits in the same spot. i let it run all night and no progress. please help.

popnick - January 21, 2012 at 7:03pm

I'm having the same problem! I'm scouring the internet looking for somebody with an explanation. This is definitely happening to some people out there. We're not the only ones.

Mats - January 21, 2012 at 7:15pm

The instructions on this link solved my problem that was the same as yours: http://mytechnicalwhims.blogspot.com/2012/01/jailbreaking-ipad-2-ios-501.html Try it.

Fabian - January 22, 2012 at 8:02am

That's my Problem, too... iuse the Win Version of Absinthe... -.-

popnick - January 22, 2012 at 3:49pm

After visiting that link above, it became clear to me that I would have to restore my phone to its factory state to have a chance at a successful jailbreak. Here is a guaranteed no-fail method: 1. Backup your phone to your COMPUTER (not iCloud). You can restore your content and settings after jailbreaking and your phone will be identical to how it was, plus the jailbreak, because restoring your phone from a computer backup does not overwrite the firmware. 2. Restore your iPhone (erase all content in settings in the settings/general menu. 3. Once restored it will guide you through the new phone setup. It will ask if you want to restore from an iCloud or computer backup - or if you want to setup a new phone. Pick "setup new phone." 4. Once the phone is functioning like new again and you're at the home screen, go ahead and jailbreak according to the instructions (remember: don't set a passcode!). Everything should go relatively quickly and it should not hang at "beginning jailbreak, this may take a while," because the Absinthe makes a copy of the content on your phone in the process of jail breaking and because the phone is new again, this will whiz by. 5. Finish the jailbreak according to the iClarified's instructions (hit the absinthe button, phone reboots, cydia should be on your screen now). 6. Open cydia, let it load the sources and packages. It may not load all sources right away. Don't panic. It took cydia about 45 minutes to function as I remembered it. DO NOT start installing apps until you restore your content. 7. Now, Attach your phone to iTunes. It will think the phone is new, but will ask if you want to restore from a recent backup of your old phone. Choose the one you just made. Let the phone restore - it might take 15 minutes and your phone will be inaccessible. 8. Once restored, everything should be as you left it - contacts, mail, calendars, texts. Your media and apps will be downloading in the background. Don't worry, Angry Birds will remember your high score. 9. As your content slowly trickles back into your device, find the Cydia app, which should be workiIng ok by now (if not, keep hitting "refresh" in the changes tab). It WILL eventually work so don't worry. Their servers are having a hard time keeping up with the recent influx of jailbreakers, I imagine. Start downloading jailbroken apps (I recommend starting with sbsettings and intelliscreenx) and enjoy! REMEMBER: Immediately backup your SHSH blobs using tiny umbrella! I honestly don't even know exactly what that means, but it basically allows you to restore your phone back to a certain version of firmware if you need to (Apple doesn't allow downgrades). I've done this method on 3 phones now and I think it's the cleanest and most hassle free way to do it. Total time it takes is around 45 minutes. For those of you having Safari crashes - I found that the app Safari Download Manager was causing mine. Pay attention to what you download and if things start screwing up, remove them one by one in reverse til the problem goes away.

Mats - January 21, 2012 at 5:38pm

Fails for me. Absinthe app starts with "Beginning jailbreak, this may take a while... Then nothing happends and it craches after 15 minutes. log file says something about device not ready... My iPhone 4S is bought unlooked from Apple. Firmware 5.01 Anyone succeded with such a device?

Ma - January 21, 2012 at 5:41pm

"unlocked" sorry for my bad spelling...

Mats - January 21, 2012 at 6:26pm

keeps repeating this message in the log: 2012-01-21 19:25:25,339 [0x0-0xee0ee].com.chronic-dev.greenpois0n.absinthe: Entity: line 1: parser error : Start tag expected, '<' not found

Mats - January 21, 2012 at 7:17pm

Solved! thanks to the instructions on this link: http://mytechnicalwhims.blogspot.com/2012/01/jailbreaking-ipad-2-ios-501.html

More Comments