Jak Jailbreaknout Vá iPhone s OS 3.0 pomocí RedSn0w (Mac)

POST

MAIL

Posted June 20, 2009 at 7:48am by iClarified

Jedná se o návod na Jailbreak vašeho iPhone 3G s 3.0 firmware pomocí RedSn0w pro Mac. Windows verze tohoto návodu je Zde. pro iPhone 2G je návod Zde

Tento návod je možné použít na Jailbreak před uplatněním UltraSn0w na odemknutí.

Krok 1
Vytvořte si na ploše složku s názvem Pwnage

Stáhněte si RedSn0w Zde a umístěte jej do Pwnage. Stejně tak si stáhněte FW 3.0, který je níže a umístěte jej do stejné složky.

3.0.0 (3G): iPhone1,2_3.0_7A341_Restore.ipsw

Extrahuje redsn0w aplikaci z RedSn0w.zip a umístěte ji do Pwnage složky.

Jak Jailbreaknout Váš iPhone s OS 3.0 pomocí RedSn0w (Mac)

Krok 2
Připojte svůj iPhone k počítači a spusťte iTunes.

Vyberte váš iPhone ze seznamu zařízení vlevo. Nyní držte Option a klikněte na Restore v iTunes. Restore je preferováno, aby nedošlo ke zbytečně promrhanému místu v iPhonu.

Přejděte do Pwnage složky a vyberte stáhnutý Firmware.ipsw. Klikněte na Open pro pokračování.

Krok 3
Jakmile iTunes dokončí Restore, můžete otevřít program redsnw0w.app který máte v Pwnage složce na ploše.

Krok 4
Na první stránce stránce klikněte na Browse.

Krok 5
Vyberte Váš stáhnutý Firmware ze složky Pwnage a dejte Open.

Krok 6
Jakmile bude Firmware ověřen, klepněte na tlačítko Next pro pokračování.

Krok 7
Ujistěte se, že je vybraná Cydia a pokračujte tlačítkem Next.

Krok 8
Připojte svůj iPhone k počítači a Vypněte jej, poté klikněte na tlačítko Next.

Krok 9
RedSn0w vám pomůže dostat iPhone do DFU modu. Můžete si najít víc pomoci s DFU modem Zde

Držte tlačítka Home a Power zároveň po dobu 10 sekund.

Pusťte tlačítko Power a stále držte Home dokud RedSn0w nerozpozná zařízení.

Step Ten
Počkejte na reboot

Step Eleven
RedSn0w začne Uploadovat RAM Disk.

Step Twelve
Jakmile bude hotovo, v RedSn0w se ukáže nápis Done! Klikněte na tlačítko Finish.
Poté, co se váš iPhone restartuje (cca 5 minut), Bude Jailbreaknut s Cydií na ploše iPhonu.

Follow iClarified

frustrated - January 7, 2010 at 8:46pm

Do I really need to restore my phone for this to work? I followed every single step except for that one, it took about 10 minutes for my phone to reboot, I didn't have any problems, but after the reboot my phone turned back on and it's as if I never jailbroke it. Nothing changed my phone is completely normal what is this jailbreak thing supposed to be like? What did I do wring?

Reply · Like

OMAR - October 10, 2009 at 7:28pm

PLZ HELP,,,, after i JB my iphone, i sync all my app again to my iphone but the problem is that all of apps are not working,, so what shall i do??? i want to use my apps again please..

Gorthi - March 18, 2012 at 7:45am

Magnificent items from you, man. I have take into account your stuff prior to and you are smlipy too wonderful. I really like what you've acquired right here, certainly like what you are stating and the way in which by which you are saying it. You're making it entertaining and you continue to care for to stay it wise. I can't wait to read far more from you. That is really a tremendous web site.Very great post. I just stumbled upon your blog and wished to say that I have truly loved surfing around your weblog posts. In any case I will be subscribing in your rss feed and I'm hoping you write once more very soon!

Herve Bronnimann - October 8, 2009 at 9:09am

Guys: thanks for all the trouble but your redsnow app does not recognize the 3.0.1_7A400 ipsw, and it takes forever(!) to restore the backup which you have to do in order to re-restore to the 3.0_7A341. This adds to the insecurity of the whole enterprise, I'm getting really queasy feelings now...

Herve Bronnimann - October 10, 2009 at 10:06pm

Happy to report that after restoring my iPhone and restarting the process with the 3.0_7A34.ipsw image, it all worked fine. As someone noted, it got stuck (for more than 15 mins) in the reboot process, but uplugging and plugging back into the USB unstuck the process. It took about 1hr+ to restore the entire iphone after that (simply restore to the previous backup in iTunes) and I was jailbroken and back to my former data. A very happy customer! I was able to VoIP on skype to France for 15 mins for less than 55 cents. Thank you guys!

Visible ink - October 7, 2009 at 7:25pm

I believe the firmware for the iPhone 3g link is incorrect... it links to iPhone2,1_3.0.1_7A400_Restore.ipsw for the iPhone 3GS it should be iPhone1,2_3.0.1_7A400_Restore.ipsw correct?

jose - October 3, 2009 at 1:58am

i download the ipsw but a bunch of files are in the folder. i cant select any and it dont look like the box ipsw please help!!!!!!!!

Jay - October 3, 2009 at 1:47am

Please somebody answer me!!!! Can I use this tutorial to jailbreak and then unlock my iphone? I just bought new iphone 3g(at&t carrier) firmware 2.2.1 modem 02.30.03. I really need to know because I already made useless my last iphone so I don't want to do the same with new one.

Jay - October 3, 2009 at 12:46am

Hi! If I'll do jailbreak from this tutorial will it make my baseband 04.26.08 which I can use to unlock my iPhone 3g firmware 2.2.1 modem 02.30.03 bootloader 6.02 ?

millca - September 28, 2009 at 10:56pm

I'm purchasing a refurbed, unactivated iPhone 3G from ebay. I do not know what version of the OS it already has installed on it. IF it already has 3.1 installed on it, will I be able to unlock and jailbreak it to T-Mobile?

DAX - September 29, 2009 at 12:30am

if it comes with anything higher than the 3.0.1 at this time...jailbreak yes.......but unlock no.. enjoy

millca - September 29, 2009 at 12:41am

That's certainly GREAT to know -- I'm glad I lost that last ebay bid then. Okay, so my #1 question to any ebay or craigslist iPhone 3G seller should be: What version of the OS is currently on it? If they have already upgraded to the latest 3.1, then I should avoid it, correct? I only have T-Mobile so I must get an iPhone that is unlockable. If they are already selling an unlocked 3G iPhone, then I should be good to go, correct? Do I need to ask them HOW they unlocked/jailbreaked it?

DAX - September 21, 2009 at 12:13am

3G w/ 3.0.1 Using Mac Book Pro Yes....if you got stuck in the rebooting part...unplug the usb and plug it again..it will work nicely....I;ve am doing it right now...phone still installing the bundles,,,,, I had to use the A341 restore ..not the A400 restore,,,,,Red Sn0w would not recognize it....... And yes, it also sync'ed all my data without asking if it was a new phone or not..... Thank you guys.....all you have ti fix is the glitch that the red snow nos the Panage tool recognized the A400 restore you download form the iClarified or the mirror sites...but it works perfectly...not to unlock the Phone!!!!!!!!!!!!!!!

Chris Diamond - November 7, 2009 at 8:30am

Excellent advice. Thanks so much!

K - September 16, 2009 at 9:02am

I've got an iPhone 3GS 32GB which came out of the box with 3.0.1 I've just used Redsn0w 0.8 to jailbreak. Used the 3.0 firmware and it worked absolutely fine. I followed the YouTube video from iPhoneinCanada (video 17pv60vVuh0). My phone had not previously been jailbroken. Hope this helps someone. I spent the last hours reading through comments and eventually decided to bite the bullet. Won't pretend I wasn't nervous... Good luck.

DAX - September 29, 2009 at 12:34am

hi K, but did you unlock it....I agree with you ...yes it works perfectly on the JB..but according to my not expert results...it did not work for the 3.0.1 unlock...had to downgrade it to 3.0 and then do the unlock.

K - September 29, 2009 at 1:28am

I haven't unlocked it. Sorry I can't be of more help.

alex - September 13, 2009 at 4:35pm

Hi, I've just succesfully jailbroken my iphone, though I seem to receive no signal... Annyone?

Shaun - September 11, 2009 at 10:21pm

Hi, I'm having the "unable to recognize specified ipsw. I've read all the posts here and noone has yet solved the problem. Can anyone help?? I've tried doing it many times already. i've tried with both restores.

alex - September 13, 2009 at 11:07am

you should load the 3.0 file even if you've installed 3.0.1

boufenache - September 13, 2009 at 12:09pm

comment instaler cydia sur mon iphone

Shaun - September 14, 2009 at 12:50pm

Hi, Yes, I tried using both the 3.0 and the 3.0.1 versions already. All had the same result. unable to recognize specified ipsw. Anyway, I jailbreaked it successfully using pwnagetool.

kyle - September 20, 2009 at 11:29pm

same problem man i am going to try the pwnge tool too thanks

jason - September 11, 2009 at 2:23pm

i think i jailbroke my phone but once its done loading jailbreak software i dont see cyndia on my phone. can anyone tell me why

Mr P - September 6, 2009 at 11:38am

I just jailbroke my iphone 3G. Anyways I cannot connect to a Wifi Network cos it doesn't find any! I also typed in the SSID and the password but it just cannot find the wifi! Also, I did the reset thing and still it doesn't find a network! what should I do? is there a wifi fix?

Priyanshu Patel - September 21, 2009 at 11:10am

judt restore again woth A4000 bundle, it will work fine.

GJM3 - September 3, 2009 at 1:59pm

Excellent site. I've now jailbroken my iPhone 3 times and have found no problems EXCEPT I've lost my visual voicemail. Is this common with anyone. I've done the reset network thing and its never worked, but thought someone would know about the VVM problems... By the way, doing a restore does un-jailbrake your phone and will restore the VVM (make sure you shut down all the way). It'll take your through the VVM set up, but everything will still be there. good luck and thanks for any help. (Jail broke on SnowLepoard.

Ny - September 3, 2009 at 10:32am

So got the 3g all unlocked and everything goes well except after the unlock I only have sound through the headphones or the speaker phone if the headphones are not plugged it. Any Ideas????

Justin Ferk - September 2, 2009 at 5:50pm

I have an ipHONE 3g and I'm following the steps. I have made it to the reboot but my phone is frozen white. What do I to get past this ? MAC - SNOW LEOPARD - 3G 16 gig

Beil - September 2, 2009 at 10:31pm

Try unplugging the iPhone's USB cable for 3 seconds and then plugging it back in. That should get the process going again.

Dii - September 9, 2009 at 5:19pm

I had to unplug it and plug it back in as well. It sounds counter intuitive, but it worked.

Priyanshu Patel - September 21, 2009 at 11:11am

unplug the cable and plug it again. will recon the iphone and start the process from there itself.

M - September 2, 2009 at 4:20am

Hey when you upgrade to 3.0.1 and then unlock ... do you keep all your contacts etc etc? Thanks

Beil - September 2, 2009 at 10:35pm

If, when asked, you restore from the back up made, then yes, your contacts, photos, notes etc should be returned to your phone.

cytokine - August 30, 2009 at 9:00am

AS PER CYDIA: Users jailbreaking iPhoneOS 3.0.1 with redsn0w 0.8 will need to select a 3.0 IPSW (3.0.1 is close enough to 3.0). And if your iphone hangs when it says "waiting for reboot" on redsn0w, simply take the usb from the iphone out and plug it back in.

Sujan - August 31, 2009 at 9:18am

The screen freezes in waiting for reboot and unplug-plug does not work. Any more ideas? Would be grateful. Using Vista 32-bit running redsn0w as admin.

chris - August 24, 2009 at 10:09pm

Anyone else having issues with resn0w not being able to verify the .ipsw file?

william wilson - August 25, 2009 at 9:10am

commented

S John - August 26, 2009 at 12:27am

Having same problem, what to do? Cannot verify IPS

Y - August 29, 2009 at 12:56pm

having same issue of not recognizing - any help?

Beil - September 2, 2009 at 10:37pm

Which .ipsw are you using for the redsn0w verification step? If you're using the 3.0.1 one that you first restored with, it won't work. You will need to use the 3.0 file that is also referred to at the top of the tutorial.

Shaun - September 11, 2009 at 12:48am

I've tried doing that, but it still could not recognise.

More Comments