Hoe de iPhone 3G/3GS unlocken door middel van Blacksn0w

POST

MAIL

Posted November 3, 2009 at 11:54pm by iClarified

Hier zijn de instructies om de iPhone 3G en 3GS te unlocken door gebruik te maken van Blacksn0w. Om deze instructies te volgen moet je iPhone in baseband 05.11.07 staan en reeds gejailbreaked zijn.

Als je nog niet gejailbreaked bent is het makkelijker om een van deze tutorials te volgen, wat je zal helpen bij het jailbreaken en unlocken samen.
- Windows
- Mac

Om je baseband na te gaan volg je deze instructies.

Laten we beginnen...

Stap Een
Start Cydia vanaf je Springboard.

Hoe de iPhone 3G/3GS unlocken door middel van Blacksn0w

Stap Twee
Tik op het Manage tab onderaan het scherm.

Stap Drie
Tik op het brede Sources knopje.

Stap Vier
Press the Edit button at the top right of the screen.

Stap Vijf
Tik op het Add knopje bovenaan links op het scherm.

Stap Zes
Geef http://www.blackra1n.com in als source address en tik dan Add Source aan. Eens Cydia de source heeft toegevoegd, tik op het brede Return to Cydia knopje.

Stap Zeven
Tik op Done rechts bovenaan het scherm.

Stap Acht
Tik om blackra1n.com uit de sourcelijst te selecteren.

Stap Negen
Tik om blacksn0w uit de packagelijst te selecteren.

Stap Tien
Tik op het Install knopje rechts bovenaan het scherm.

Stap Elf
Tik op het Confirm knopje rechts bovenaan om de installatie te beginnen.

Stap Twaalf
Eens de unlock succesvol geinstalleerd werd tik je op het brede Return to Cydia knopje.

Stap Dertien
Wacht enkele minuten zodat je CommCenter herstart en je zal nu de mogelijkheid hebben om de SIM kaart naar jouw keuze te gebruiken op je geunlockte iPhone!

***THANKS: Gefiliciteerd en bedankt Geohot om deze unlock mogelijk te maken. Je kan doneren voor zijn inzet op www.blackra1n.com.

Follow iClarified

500895e - May 11, 2014 at 2:59pm

لو سمحت انا اتبعت الخطوات والتليفون في النهايه ثبت علي شكل التفاحه وما حابب يفتح ياريت تدلني شو نسوي لان كدا التليفون مات

Reply · Like

ankit - April 23, 2013 at 5:40pm

Phone got stuck in boot mode,my phone is booting mode. IPhone 3g 4.1 Trying to do a restore now. From my experience don't try this!! please help me how to get out for this problem.

Dane - February 17, 2013 at 1:40pm

Phone got stuck in boot mode. IPhone 3g 3.1.3 Trying to do a restore now. From my experience don't try this!!

Saul - April 15, 2013 at 1:03pm

For the people who wants to unlock ATT phones, go google attiphoneunlocking, they unlock any model and firmware up to date. Took me only two hours.

Desean - December 17, 2012 at 2:28pm

the package didnt even tell me that blacksnow is for 3.1.2 im on 5.1 and downloaded it. now my iPhone 3gs 8gb wont get past the apple logo, and when i went into redsnow i tried "just boot" and i tried "jailbreak and install cydia" neither one worked. so there should be specifications INSIDE THE PACKAGE TO LET PEOPLE KNOW THAT IF YOURE ON 5.1 IT WILL KILL YOUR PHONE.

dhopki4 - August 8, 2012 at 3:20pm

Blackra1n caused my 3g to go into a continuous loop. just use ultrasn0w, i had no issues!

jazzroom - January 18, 2011 at 4:04pm

HELP NEEDED: After running blackSn0w on 3GS 3.1.3 jailbroaken with blackra1n i've lost Wifi completely :( it's a known problem any idea what app combo to use instead to reset / re-jailbreak and re-unlock the most stable to day method ?

jan - February 6, 2011 at 4:10pm

mam zablokovanej iphone chce to kod 4 misti a nevim jak ho spustyt

jazzroom - January 16, 2011 at 12:11pm

After running blackSn0w on 3GS 3.1.3 jailbroaken with blackra1n i've lost Wifi completely :( it's a known problem any idea what app combo to use instead to reset / re-jailbreak and re-unlock?

loue - February 14, 2012 at 5:32am

nyrry

loue - February 14, 2012 at 5:41am

live

Eduardo Castillo - December 29, 2010 at 10:45am

Unfortunately for my iPhone 3G/3.1.3(7E18)/05.11.07/PwnageTool jailbreaked, w your Unlock Wizard (on iTunes 10.1.1) your "iPhone | How to Unlock the iPhone 3G, 3GS Using BlackSn0w" doesn't worked. Now I have a continually restarting device that never ends starting on. Can someone help me?, please!

David - January 13, 2011 at 6:21pm

Hey Eduardo! I have had the same problem after trying to unlock using the above method. Here is my iPhone data: - iPhone Model: 3GS - Firmware: 3.1.3 (7E18) (previous firmware was 3.1.2) - Baseband: 05.11.07 - NEW bootrom. Serial number: 5K952... - Jailbreaked using PwnageTool 3.1.5 (I followed iClarified wizard to select the jailbreaking method) In order to successfully restore, follow these steps: 1. Turn off your iPhone by holding down both home and power buttons, because sometimes it doesn't shut down by pressing the power button only. 2. Once it is turned off, plug your USB cable into the iPhone connector ONLY. 3. Open up iTunes. 4. Plug your iPhone into your computer WHILE holding down the home button ONLY! 5. Keep holding it down for at least 1 minute (Sometimes it can take up to several minutes. Be patient!) until iTunes will pop up a message telling you it has found an iPhone in restore mode (THIS IS NOT THE SAME AS DFU MODE!). 6. Then restore it with your customized firmware. ...and Voilà! iPhone restored! Now I have to look for an unlock method other than the one mentioned here. After several hours searching on the web, It worked for me! I was really desperate until I found this guy who taught me this method: http://gdgt.com/discuss/iphone-3gs-wont-boot-past-apple-logo-4i4/ Hope this helps, dude! :-)

jazzroom - December 17, 2010 at 2:20pm

[Help] Have been using 3GS 3.1.3 jailbroaken with Blackr1n with no probs, till I've desided to unlock it with Blacksn0w.... unlock went Fine - but Wi-Fi is broken ... network reset didnt't help :( thanks in advance for ANY help

Ofili E - July 18, 2010 at 11:39am

You guys are awesome. I'm from Nigeria. Thank you so much! I wish you all the best.

jomar - July 22, 2010 at 9:42pm

Did you need turbo sim?

Andre - June 28, 2010 at 10:25pm

Attention: if you are on 3.1.3 and baseband 05.12.01 you must use this: http://www.crispytech.com/2010/06/22/unlock-iphone-3gs-3g-3-1-3-ultrasn0w-0-93 Otherwise you will be stuck and have to restore your phone. BlackRa1n does not work with 05.12.01 (nor does BlackRa1n RC2)

zain - June 29, 2010 at 11:27am

Hi, my i phone is know stuck on the apple logo is there any way to fix it its a iphone 3gs 3.1.3 and when i try to restore i tunes doesnt let me also i do have the shsh when i jail broke it could you please help thanks

jeanluc - June 29, 2010 at 1:02pm

I have the same probelem Di you find a fix? I am really worry

jeanluc - June 29, 2010 at 1:16pm

how do I restore my phone now that I am stuck? Please help

iZak - June 29, 2010 at 1:53pm

Hi. Start over from the top but use ultrasn0w instead of blacksn0w. Instead of typing blackra1n.com you type repo666.ultrasn0w.com. Worked on My phone wich also had froze...

jeanluc - June 30, 2010 at 2:49am

Thankx but I can not pass from the apple logo is stuck there...How un froze it?

iZak - June 30, 2010 at 5:54am

Press and hold the powerbutton and the homebutton at the same time until it shuts off. Then you have to jailbreak your phone again using iclarifeds tutorial. Once your phone is jailbreaked you unlock your simcard using this guide...

iphone user - June 11, 2010 at 1:31pm

Please help... I have an jailbrocken, unlocked iphone 3g which i have been using for 2 yrs with t-Mobile usa. Suddenly i lost Service. It says 'No Service' but wifi and others things works. I tried to do a network reset, jailbroke again, unlocked again, toggled 3G, airplane mode...but still not working. I tried to put in a AT&T sim and still stays no service. Can anyone please help me. I am worried that it might be some hardware issue.

Xuriks - May 31, 2010 at 8:51pm

So I went through this tutorial. at the very end I clicked the return to Cydia button and the phone did so as it was suppose to and where the phone usually displays my provider it instead displayed "searching...". I waited a few minutes like the tutorial says to. After a few minutes had passed and nothing changed (still said "searching..."), I realized that the phone was frozen. I reboot the phone, the Apple logo displays, and it stays there and does nothing. I tried plugging into my PC to restore it but iTunes doesn't seem to recognize that its plugged in anymore. idk what I'm going to do with out my phone. Any help would be awesome. Thank you in advance.

Ty Phan - June 3, 2010 at 4:59pm

I had problem like you described. Two days after the Apple logo displays on and off i gave up waiting for something to be happened. I took my iphone (OS 31.3, 05.12.01) to the repair shop. It costed £15 to reboot the phone. Now i still want to unlock it. My current network is O2. If you have successed in unlocking your OS 3.1.3, please let me know.

Xuriks - June 3, 2010 at 8:38pm

Hello Ty, Unfortunetly I do not have a fix. I brought my phone to the Apple store and they replaced it for free.

Rick - June 4, 2010 at 4:52pm

Exact same thing happened to me, except I didn't get that far back into Cydia. A bit worried, this isn't my phone, I was doing it for a friend. I can't even DFU now. Any ideas?

Xuriks - June 4, 2010 at 7:58pm

if it's under a year old just get it replaced. just tell em it froze while charging sonyou reset it and now this is all you get.

iZak - June 28, 2010 at 1:16pm

Hi, I got the same problem. But when i used ultrasn0w instead of blacksn0w, it worked perfectly. Instead of typing blackra1n.com, type repo666.ultrasn0w.com. Worked like a charm for me!

Nt02 - June 16, 2011 at 3:13pm

thanks buddy! your one little post made my day. helping out a mate and blackra1n would not work, totaly froze the unit on startup. ultrasn0w did it perfectly, legend! cheers

Tony - May 27, 2010 at 8:49pm

Hi everyone... Okay so I have an iPhone 3GS with 05.11.07 baseband & 3.1.2. I unlocked it and have been using this phone in the Dominican Republic on CodaTel for 8 months without any problems. On Friday I lost service, rebooted the phone and it locked on the pineapple boot screen. I managed to get it restored with pwnagetool, restored the backup and got it all configured. I downloaded Blacksn0w and it locked up again. This site says 05.11.07 is a good firmware to use with Blacksn0w, but other forums say that it doesn't. Can anyone provide any insight on my problem... Please?

Areeb Nazim - May 28, 2010 at 2:52pm

Here is what I would do in your case...Download the 3.1.2 firmware for your phone....restore using itunes to 3.1.2 (Hold the shift button and press the restore button in iTunes). DO NOT update to 3.1.3 any any cost!! Browse to the path where your 3.1.2 is saved. Once restored, use Spirit to jailbreak first. http://www.spritjb.com . and then from within Cedia use ultrasn0w to unlock the phone. If you phone is working fine and is just lock avoid using the restore part in the instructions above and skip to the Spirit website for a jailbreak and unlock.

Gibsie - May 19, 2010 at 10:10am

This does not work...I have done it twice now and each time it just searches and does nothing apart from grinding the OS to a halt when trying to navigate. I am on 3gs 3.1.3 and BB 5.11.07.

Janus - May 19, 2010 at 7:30pm

Alright, this issue occurs if your baseband becomes corrupt. In order to fix this problem, you have to restore to the original 3.1.2 firmware (you can download the firmware from this link: https://www.iclarified.com/entry/index.php?enid=750). Please don't create a custom restore ipsw - just restore from that file (this ensures that your baseband will be reinstalled too). After the restore you have to hacktivate your phone (use blackra1n) in order to re-restore to 3.1.3 (and this time u better use a custome ipsw ^^).

AppleH - June 19, 2010 at 2:46am

I tried this, still can't resolve my wifi issue.. any idea? Thanks

ervin - May 16, 2010 at 12:49pm

need help i wanted to know if I can unlock my iphone 3gs 3.1.3 ...

Janus - May 16, 2010 at 8:06pm

Hi guys! This is a response to everyone who's on 3.1.3 and trying to unlock his 5.11.07 baseband. There is a small bug in blacksn0w which dont makes geohots blaksn0w compatible to 3.1.3, BUT you're in luck: Add this source (http://cydia.pushfix.info) and install blacksn0w rc2 in Cydia. This blacksn0w version has been modified by msft.guy and is compatible to 3.1.3 and 3.1.2. It also fixes the wifi-issue (so use this one instead of the original blacksn0w)! I tested it on 3.1.3 (3GS) AND IT WORKS! (note: ONLY if your baseband is still on version 5.11.07 and on 5.12.01!!!) Enjoy it! For details see: http://msftguy.blogspot.com/2010/03/fixing-blacksn0w-on-313.html

Areeb Nazim - June 4, 2010 at 2:37pm

If you have baseband 5.11.07, you can unlock. The unlock for basband 5.12.01 will be released on June 7th 2010. Go to Settings --> General--> about and check.

Shirin Pakfar - June 7, 2010 at 3:22pm

It is June 7th! Any idea when the unlock for the 05.12.01 will come out? Thanks in advance!

fragglepop - May 15, 2010 at 10:12am

Same problem, jailbreak with pwnage then no phone connection. then i used this blacksnow to unlock and now I'm stuck on the pwnage pineapple symbol. what can I do? Please help? I need my phone for important information i have on it... I have read the same complaint over ajnd over but no solution.... please help me get my iphone back on track thanks

hhhhhhh - May 26, 2010 at 9:06pm

only thing you can do is restore in itunes (and you lose all data on iphone) (connect to your computer, hold home butt on iphone, open itunes, release home button, restore in itunes - or something like that, don't remember for sure, if this doesn't work check on net exact procedure

Antonio - May 12, 2010 at 6:41pm

Help!!!! Hi folks, I had my iPhone 3G firmware 3.1.3 jail broken with Pwnage Tool, but for some reason I did not get connection to my cell phone provider, so I tried to unlock with blacksnow according to your instructions. For some reason in step 12 the phone got stuck and said "loading Cydia", but did not continue, so I left it alone and after a while it seemed to automatically reboot, but got stuck with the "pineapple" symbol. It does not continue to load and does not react to any button anymore. I can reboot with the same result holding on/off and home buttons, but nothing else. When I connect it to the computer iTunes does not recognize the phone and the phone does not react being connected in any way. Help! What went wrong and more important: How can I fix it? please Helppp Best regards,

Antonio - May 12, 2010 at 7:11pm

I figured it out. You need to go into recovery mode (not DFU) and restore the iphone (using the jailbreak firmware) with itunes. Google and you shall receive.

Ty Phan - June 3, 2010 at 5:57pm

Can you direct me to the link? I had the same problem as described, but didn't know how to get to the recover mode...thanks

Leo - May 8, 2010 at 5:45pm

Eric - April 25, 2010 at 12:34am

doesn't work on bootrom 06.04 regardless of firmware...

More Comments