Come sbloccare/aprire il tuo iPhone 2G 2.x.x con QuickPwn (Windows)
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted February 3, 2009 at 11:25pm by iClarified
Ecco le istruzioni su come sbloccare/aprire il tuo 2G iPhone con installato il firmware 2.2.1 usando QuickPwn per Windows. Prima di iniziare assicurati di aver provveduto ad aggiornare iTunes all'ultima revisione 8.0.2.
Fase uno Crea una cartella col nome Pwnage sul tuo desktop.
Estrai da QuickPwn-225-2.zip il file compresso nella cartella Pwnage.
Fase due Connetti il tuo iPhone al computer e fai partire iTunes 8.0.2.
Seleziona il tuo iPhone dalla lista delle periferiche connesse. Tieni premuto il tasto maiuscolo e clicca la casellina Restore. Restore è preferibile poichè non crea inutile spazio sul tuo iPhone.
Vai nella cartella Pwnage sul tuo desktop e seleziona il file: 2.2.1 firmware ipsw. Clicca la casellina Open per continuare.
Fase tre Quando iTunes ha finito di aggiornare l'iPhone col firmware 2.2.1 devi far partire il programma QuickPwn.exe che trovi nella cartella Pwnage sul desktop.
Fase quattro Assicurati che il tuo iPhone sia conesso al computer e clicca sulla freccia blu per continuare.
Fase cinque Clicca sulla casellina Browse per trovare il nuovo firmware.
Fase sei Seleziona il firmware 2.2.1 ipsw nella cartella Pwnage sul tuo desktop e clicca sulla casella Open.
Fase sette QuickPwn verifica che il file ipsw sia valido. Ora clicca sulla casellina blu per continuare.
Fase otto Da qui puoi scegliere se aggiungere i programmi Cydia e Installer, cambiare il logo di avvio e sbloccare il gestore telefonico. Seleziona le opzioni che preferisci installare e quindi clicca sulla freccia per procedere.
Fase nove Ti viene chiesto di scegliere quale bootloader (programma che trasferisce sull'iPhone il files) usare. Clicca su Browse e scegli il bootloader 3.9 che trovi nella cartella Pwnage sul tuo desktop. Fai lo stesso col bootloader 4.6. Quindi prosegui sulla freccia blu per proseguire.
Fase dieci QuickPwn ti chiede di verificare che l'iPhone sia connesso via USB prima di continuare. Per continuare premi la freccia blu.
Fase undici QuickPwn mette ora il tuo iPhone in modo "recovery". Non appena passa in modo "recovery" devi: Premere il tasto dell'iPhone "Home" per 5 secondi. Poi remere assieme i tasti "Home" e "Power" per 10 secondi, quindi rilasciare il tasto "Power" continuando a tenere premuto il tasto "Home" finchè il tuo iPhone passa al modo "DFU".
Segui attentamente le istruzioni e procedi.
Fase dodici Non appena il programma QuickPwn rileva che il tuo iPhone è in modo DFU inizia il processo di sblocco.
Passo tredici Quando ha finito, QuickPwn ti informa che lo sblocco è stato effettuato con successo. Il tuo iPhone procederà ora ad avviare il processo BootNeuter. Questa operazione dura circa 5 minuti. Sii paziente, il tuo iPhone si riavvia automaticamente qundo avrà finito!
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
hola .. yo tengo un iphone 3g que me trade de usa. y quiero usarlo aqui en mexico con telcel . el problema que tengo es que cuando lo prendo me pide activarlo por medio de wifi o itune . cuando lo conecto por puerto usb a mi ordenador . me sale en el itunes que no tiene tarjeta sim .. no encuentro solucion a esto .. sabes el por que no me detecta la tarjeta sim !! o cual seria el problema ..
gracias
hi my problem comes when i shift+restore my phone i use the provided restore file but it says iphone could not be restored and error occured(20) anybody know of any help to fix this?
Nice set of user friendly steps.
Just would like to add from my end:
1. The link to QuickPwn.zip seems to be dead. Use
http://mytopfiles.com/archives/file/QuickPwn-225-2/304244.htm
instead.
2. Mention the step to rename
iPhone1,1_2.2.1_5H11_Restore.zip
to
iPhone1,1_2.2.1_5H11_Restore.ipsw
3. Mention the need of Microsoft .Net Framework 2.0 to run the QuickPwn
Itune recognize my iphone, I can click on the LHS but I don't see the restore button that I need tp press along with the shift, IT seem like I am missing something here. please help
I have firmware 3.1 on my iphone. When I connect to itune, it goes directly to the screen where it says to activate it with At&T. I don't see the screen where I can click the restore button along with the shift key. How to get that screen? Please help
I unlock the phone succesfully And it detect the VOdafone India sim/network. Thank you.
But there is a problem when I try to make a call it shows a message saying that I need to connect the phone to the itunes and only can make only emergency calls. through the emergency calls i can make phone calls but nothing more
Hi
I am from Singapore using M1 (if any1 knows).
My 2G phone was jailbreaked n unlocked 2 yrs ago serial 7U746WBOWH8, using 1.1.3(4A93) modem firmware 04.02.13_G.
I want to upgrade into 2.xx so i can use itunes application, but im not sure if this method will work for me??? any1 in singapore tried this before???
(email: antiphase214@yahoo.com.sg)
thank you for reading
This is for iphone 2g. When i get to "Wait for yout iphone to connect in Recovery Mode" it seems to stop there, i dont get no response. But while that does not respond when i press the home button and the powere button it starts the process after but then when it comes to the jailbreaking stages just on the last second of the 30 seconds it say either i have done the wrong process or the usb is faulty! i have tried it in a few usb ports, but yet no luck! Help is needed please , urgently thanks!
THIS TUTORIAL WORKED GREAT! I UNLOCKED MY IPHONE 2G IN LESS THAN 20 MINUTES EVERY OTHER PRGRAM I HAVE USED HAS NOT BEEN SUCCESSFUL LIKE THIS ONE. THANK YOU SO MUCH.
-JARED
I used this tutorial and it worked perfectly! I did not have other SIM card, so I just took out ATT SIM card when unlocking my phone. Thank you for the great tutorial!
If I upgrade to OS 3.0 will it lock my phone back?
There's a link on the top of the page if you want 3.0 firmware. The procedure to jailbreak and unlock is pretty much the same and also very easy to follow. Of course when you upgrade to any firmware, it will relock your iphone. The only problem I had is on both firmwares 2.1 and 3.0, the process doesn't work on Windows Vista, I got stuck in the middle of the process, I thought my iphone was bricked but when I switched to my other PC with Windows XP, it worked like a charm. I just had the new 3G iphone so I used this 2G iphone to practice, restored & unlocked, restored & unlocked so many times now that I can do it with my eyes closed! Just k/d!
If you get an error in a middle of unlock process on Vista, you can use this trick: Before starting the Unlock/Jailbreak process, click the .EXE (redsn0w.exe), select Properties and go to 'Compatibility' tab, check 'Run this program in compatibility mode for' and select XP SP2 or Vista. This essentially tells the executable to run as if it was running in XP. After that you follow the instructions as they are. Works like a charm! You don't need to hunt for an XP machine. Btw, this works with any executable. So, if you have an application that doesn't run on Vista, you can use this trick. And it is a welknown compatibility method- not an hack- which is fully tested by Microsoft.
itunes 8.0.2 for 64 bit vista - http://notebook.driversdown.com/ViewDownloadUrl.asp?ID=139900&brNum=3&show=0
jailbreak - https://www.iclarified.com/entry/comments.php?page=3&enid=1880#commentsanchor
unlock - https://www.iclarified.com/entry/index.php?enid=4253
steps:
1. the iphone restore did not work with shift + restore.. so i just restored (click restore without pressing shift), it downloaded 2.2.1 from apple website and restored it to factory settings. this was done to erase all previous used space and user settings etc.
2. after this, it was asking for activation, showing only emergency calls only etc.. i was kind of scared as nothing was accessible.
3. but i just continued with the jailbreak steps mentioned in https://www.iclarified.com/entry/comments.php?page=3&enid=1880#commentsanchor and it jailbroke the iphone with cydia installed. some relief here.
4. next was the most cumbersome (according to me) step of unlocking it for vodafone india sim. after googlinh reading many many docs and comments here and there, i realized that my modem firmware is at 2.30 where as yellowsn0w supports only 2.28, and the methods to downgrade were too complicated like using ssh and typing cmds etc..
5. so i upgraded my modem firmware (not iphone OS) to 4.26 using "fuzzyband 3.1b1" . this can be installed by searching in cydia, it detects the current modem firmware and upgrades it from 2.30 to 4.26
6. next i used ultrasn0w to unlock the iphone for india vodafone sim using the instructions at https://www.iclarified.com/entry/index.php?enid=4253 . here make sure you turn 3g off.
![OpenAI Releases GPT-4.5 [Video]](/images/news/96580/96580/96580-160.jpg "OpenAI Releases GPT-4.5 [Video]")
![Powerbeats Pro 2 Heart Rate Tracking Fails in Fitness Tests [Video]](/images/news/96573/96573/96573-160.jpg "Powerbeats Pro 2 Heart Rate Tracking Fails in Fitness Tests [Video]")
![Apple May Already Be Developing Next-Gen iPhone 17e [Rumor]](/images/news/96571/96571/96571-160.jpg "Apple May Already Be Developing Next-Gen iPhone 17e [Rumor]")
![Apple M4 Max 16-inch MacBook Pro (48GB RAM, 1TB SSD) On Sale for $435 Off [Deal]](/images/news/96576/96576/96576-160.jpg "Apple M4 Max 16-inch MacBook Pro (48GB RAM, 1TB SSD) On Sale for $435 Off [Deal]")
![New Apple M4 Mac Mini On Sale for $549 [Deal]](/images/news/96553/96553/96553-160.jpg "New Apple M4 Mac Mini On Sale for $549 [Deal]")
![Anker Announces New Sale: Up to 52% Off Smart Scales, Speakers, and More! [Deal]](/images/news/96542/96542/96542-160.jpg "Anker Announces New Sale: Up to 52% Off Smart Scales, Speakers, and More! [Deal]")
![Apple AirTag Four-Pack Hits New All-Time Low Price of $67.99 [Deal]](/images/news/96537/96537/96537-160.jpg "Apple AirTag Four-Pack Hits New All-Time Low Price of $67.99 [Deal]")
![Apple 13-inch M2 MacBook Air (16GB RAM) On Sale for $799 [Deal]](/images/news/96295/96295/96295-160.jpg "Apple 13-inch M2 MacBook Air (16GB RAM) On Sale for $799 [Deal]")
